Search results

  1. TubeTruck

    2wd box for 4wd?

    I know you need a 2wd steering box for crossover but can you use it for the stock 4wd steering if you clock the steering arm correctly? I'm asking because I am thinking of buying a PSC box as mine is pretty worn. I want to do crossover in the future but can't afford it right now and I don't want...
  2. TubeTruck

    97 454 L29 Vortec into a 80 K25

    Finally finished my engine stand. Been piecing it together for a while now. I'm glad it held and it didn't even flex under the weight of the BBC. Eventually I'll make the plate for the 15:1 gearbox and crank handle. #1 cylinder had about 1/4 cup of oil in it. The valley is really gummed up. I...
  3. TubeTruck

    New engine break-in method

    You still need to seat the rings. Isn't that a part of the break in?
  4. TubeTruck

    New engine break-in method

    I read this the other day and thought I might try it when I build my 454
  5. TubeTruck

    My new acquisition

    That is the first Ford from that era I've seen without holes in the frame lol nice score!
  6. TubeTruck

    What fluid stains do your daily drivers leave?

    I've only been parking in this spot for 6 months :eek:
  7. TubeTruck

    Do I need a block heater?

    No, but you might want to start it a few minutes before you leave so it warms up some.
  8. TubeTruck

    Brand Recommendations for front end components.

    I've always used MOOG. They are owned by Energy Suspension, or MOOG owns them? Either way, same company lol
  9. TubeTruck

    NP203... no 4 wheel drive

    I had similar issues with mine when I put the slugs back in. Cruising about 50 the 203 was making some weird noises and sounded like the chain flopping around or gears trying to mesh that weren't supposed to. I swapped to manual hubs and all the racket went away. I do have the current part time...
  10. TubeTruck

    15" vs 17" wheels

    I'm running 285/70/R17 Cooper AT3 XLT's. Yes, load range E1. Super nice ride but it's most likely the tire. A lot of wheelers are running 17's these days. 17's are the new 15's and 37's are the new 35's lol
  11. TubeTruck

    Heater hose routing

    I believe you should have a 3/4 port and a 5/8 port on the heater core. The 3/4" port goes to the radiator and the 5/8" port goes to the intake at the thermostat. The BBC engines have a port at the front of the manifold that goes to a port on the top/back of the water pump. Some people do not...
  12. TubeTruck

    Another isolator thread...help

    I think what I wrote was correct. Just took a bunch of times reading the description. For some reason I couldn't wrap my head around it, but I think my last post is correct.
  13. TubeTruck

    Need help with engine bay wiring

    Haha, no
  14. TubeTruck

    Another isolator thread...help

    This is the one I bought: Amazon.com: NVX Microprocessor-Controlled 200 Amp, Dual Sensing Smart Relay Battery Isolator: Car Electronics Their site was down but here is the manufacturers website: https://nvx.com/nvx-xsbi200.html If I'm reading the description correct I believe this isolator...
  15. TubeTruck

    Another isolator thread...help

    Ok, so I'm feeling a little dumbfounded when it comes to installing this battery isolator. I'm trying to install a 2nd battery (obviously) and can't seem to wrap my head around the wiring. I understand the drawing that came with the instructions but where do you run the cable to the starter...
  16. TubeTruck

    Steering shaft...leak?

    It's your hydraboost leaking. Where the master bolts to the booster there is a small weep hole on the bottom. It drips right where you are talking about.
  17. TubeTruck

    This is my mess...

    :welcome: from northern IL! Replace ALL the vacuum lines, even the little one under the truck that goes to the tranny.
  18. TubeTruck

    What have you done to your square lately??

    Flex Seal tape to the rescue!
  19. TubeTruck

    97 454 L29 Vortec into a 80 K25

    I have EFI Live, $100 for a VIN license and you can do whatever you want for the rest of your life. My 0411 is out of my old 2001 2500HD truck with a 6.0L. That might actually be worth it then.
  20. TubeTruck

    97 454 L29 Vortec into a 80 K25

    Why put the pro flo when your have the EFI already? Save your money and use the factory EFI. It's good to 550hp or so.
  21. TubeTruck

    97 454 L29 Vortec into a 80 K25

    I would love to but my 350 is quickly dying and I need to get another engine in. I'll look into the cost but it looks like it's at least another $500-$1k to do it now and I don't have that cash.
  22. TubeTruck

    97 454 L29 Vortec into a 80 K25

    Yup, I am aware of the reluctor change but not the repinning of the injectors. Good to know. Now you got my wheels turning. I think I'm going to run another 4 wire distributor harness in with the current one. That way when I switch to CNP I can unplug distributor connector and plug in the CNP...
  23. TubeTruck

    What have you done to your square lately??

    Installed aux battery tray. Had all the dimples, just drilled them out, used a little persuasion and bolted it in. Ordering welding cable and smart solenoid to set up dual battery.
  24. TubeTruck

    97 454 L29 Vortec into a 80 K25

    I've been picking at the harness, all the loom and tape just crumbled so it was kind of easy to unravel. Seems the mechanic that took the motor apart broke all the injector connectors. I had to buy all those and am in process of making my own harness. I've also cut all the wires for the...
  25. TubeTruck

    Unwritten rules of mouldings?

    Mine are held on with self tappers just like yours, but my screws are painted black to match the center of the trim lol

Latest posts

Forum statistics

Threads
44,401
Posts
956,680
Members
36,710
Latest member
GreenbloodedAmazo
Top