Search results

  1. 77 K20

    Hello From New Member

    You should move. :Big Laugh: There aren't a whole lot of them stock anymore. Sounds like you have something special there already. When you get a chance post some pics of it! Welcome!
  2. 77 K20

    Very rough/rocky desert trail cruising

    I agree with Frankenchevy- the ORD springs are quite amazing. You get up to 14 inches of travel out of them (you will need custom shock mounts to have a shock this long). I too was getting tired of getting "beat up" after long days on the trail. I've bashed my head against the steel roof of the...
  3. 77 K20

    79 k30 steering box replacement

    In case you didn't know RockAuto is a preferred vender on here and there is a 5% off code... https://www.gmsquarebody.com/forums/rockauto.38/
  4. 77 K20

    79 k30 steering box replacement

    I bought a new Lares steering gear from RockAuto. It was cheaper than Redhead Steering boxes or the PSC steering. But both of those are good also. I've only put maybe 100 miles on my Lares steering gear, so can't comment much on it. But it works so far. My previous rebuild years ago leaked 10...
  5. 77 K20

    Aluminium heads for small blocks

    Every time I have tried to save $$ it comes back and bites me in the ass. I did buy my dad a set of Edelbrock E-street heads for his 350 and he really likes them. But they come in complete at $950 or so.
  6. 77 K20

    Rear shocks

    I think there are other companies that make something similar. Or you can make them yourself: https://www.offroaddesign.com/rear-shock-brace-kit-for-73-87-91-k5-blazer-jimmy-k10-and-k20-pickup.html Would still need to weld some washers or whatnot to fix that hole first though.
  7. 77 K20

    What should high vs low idle voltage be?

    In my '77 truck it came stock with the 10si alternator. At idle and in gear at night, with the headlights on, heater and fan on, and the wipers on in the rain was pretty much too much for the alternator. Instead of buying some expensive aftermarket alternator I installed a 12si alternator and...
  8. 77 K20

    Steering Box Question - 2wd to 4wd conversion r3500 Crew Cab

    If you order the Reid Racing knuckles (they only come in orange power coat) then you can convert D44 or the GM corporate to crossover. But the knuckles cost $250 or so each. And I had to replace both sides on mine (D44)- as the tie rod drops down from up top instead of from underneath. This does...
  9. 77 K20

    Steering Box Question - 2wd to 4wd conversion r3500 Crew Cab

    As part of your order with ORD did you also order their 2wd to 4wd conversion brackets for the front suspension? https://www.offroaddesign.com/2wd-to-4wd-main-eye-conversion-brackets-for-81-87-91-gm-trucks-pair.html
  10. 77 K20

    Steering Box Question - 2wd to 4wd conversion r3500 Crew Cab

    Are you sure it is a D44? Cause by 1979 they switched from Dana over to their own GM10 bolt front axle. Some of the parts are interchangeable... just don't want you ordering a bunch of stuff before it gets there and have it not fit.
  11. 77 K20

    1987 V30 Rear Brake drum to disk conversion

    I read about rear disc brake conversions for months before trying mine. I still don't see how a lot said just slap the rear discs on and keep everything stock as it will work perfect! Maybe my definition of perfect is different than others... Or in the last 40 years some previous owners has...
  12. 77 K20

    1987 V30 Rear Brake drum to disk conversion

    When I did the rear brake conversion on mine I left the stock MC on it. Had rear brake lockup even on dry pavement. So I ordered the 60s corvette disc/disc MC. Still had rear brake lockup on dry pavement. Then I ordered "The right stuff" PV72 disc/disc combination valve. Still had rear brake...
  13. 77 K20

    Question For My K20 Brothers

    That's odd. Normally for me they have shipped in the next day or two from when placing an order.
  14. 77 K20

    What should I include in my emergency tool set?

    For me it depends on where you will be driving. I often drive out into the middle of nowhere by myself. No cell service- no houses, little to no people. I carry a basic craftsman tool set, wool blanket, shovel, flares (easy way to start a campfire), mountain bike (riding a bike out is easier...
  15. 77 K20

    Relocating Center Pin

    I think you'd be fine with the center pin in the stock location. And in the future if you change your mind ORDs axle relocation plates are only 1/4" thick and you can then move the axle forward 0.5"/1"/1.5" Are you going to keep using your sway bar? This will limit wheel travel and prevent you...
  16. 77 K20

    Front and Rear Axle Install

    Make sure both axles have the same gearing.
  17. 77 K20

    Question For My K20 Brothers

    The same thing happened to me when I first bought my truck many many years ago. Previous owner had driven like that so long it even wore a flat spot in the frame with it rubbing all the time. My first project was new shocks and the greaseable bushings with the slightly longer shackles. The...
  18. 77 K20

    What ate my front u joints? Dana 44

    Do you know if your old axle U joints were 297s? The old original part was 5-297x part number. Spicer then made a newer upgraded version of this and it is the 5-760x On rock auto the 760x costs $17.73 instead of $11.73. What is the difference...
  19. 77 K20

    New Tires are Ugly. Bring the Classics Back!

    All that crap on the sidewall is very fuctional if you leave the pavement. I'll take function over looks any day. My first flat tire was running over a stick and a sharp part of it came straight up and ripped the sidewall. That is very unlikely now with the tread that wraps up the sidewall a bit.
  20. 77 K20

    Hello from Montana.

    I want to move over to your side then. The idiots here will even spray it on 100% dry roads in the early spring when there is no chance of rain/snow/ice just to "use it up" so they don't get their budget cut for the next winter. I just had to fix a grapefruit sized rust hole in my floorboards...
  21. 77 K20

    Hello from Montana.

    A Montana Blazer that isn't all rusted out? Wow- :welcome:
  22. 77 K20

    Super swampers on a dully

    I don't see anything wrong with this at all... OR: (not super swampers but close) :D
  23. 77 K20

    Rough Country 6inch lift dumb question

    Hard to exactly envision what you are saying... but I think it is just because the springs are hanging and there is no weight on them. If you put a jack under the center of the leaf spring pack and nicely start lifting (putting some pressure on them) I bet the shackle will start looking...
  24. 77 K20

    Super swampers on a dully

    https://www.intercotire.com/blem_list_0 Interco has a blem list that they have cheaper tires on. Not sure the chances of them having the size you need- but worth checking out. They have 35X10.00-16 (8 in stock) for $175 each just as an example. I just spent too much on tires and wheels for my...
  25. 77 K20

    Overhead tonneau cover?

    I had a 2003 Silverado 2500. It was garaged. I used it to cover up the 5th wheel hitch when I wasn't towing. They have an aluminum "frame" that attaches to the bed rails... but instead of mounting on the top of the rails like the softopper it mounts to the inside edge. These aluminum rails...

Latest posts

Forum statistics

Threads
44,392
Posts
956,336
Members
36,683
Latest member
aim410x
Top