Search results

  1. S

    Starter wiring problems

    Lets just deal with the alternator for a second. What exactly are you asking? It looks like the plug part is fine. Nothing is attached to the terminal though and your holding loose wire in your hand. Are you asking if that wire is suppose to be on the terminal? Well check and see if there...
  2. S

    How many gallons can you put in your gas tank?

    I fill gas cans, and I have a couple of 15 gallon portable tanks IDK what they are really called, but they are a cylinder that lays on it's side and has little legs to keep it from rolling and a gas pump handle. I should take a picture of one of them. Anyhow the vapor recovery nozzles are a...
  3. S

    How many gallons can you put in your gas tank?

    Your not imaging it you own one! But your truck is a pretty unique configuration and I bet you get a far bit better mileage than most of us!
  4. S

    How many gallons can you put in your gas tank?

    That's been able my experience. And that's how I know I need to switch tanks NOW when the gauge stops moving a little. Like you I can get more than 19 gallon in a truly empty tank. Which brings me to my next point, depending on how sensitive and what type of shut off is on the pump handle can...
  5. S

    How many gallons can you put in your gas tank?

    I think we all have a technique as to how we use the dual tanks. My Dad's truck as an example had a 20 D/S tank and a 16 PS, He hated filling both tanks, so he'd run off the DS tank only, unless he took it on a long trip. For me, because I run my truck a lot I definitely make use of both...
  6. S

    Where can I get an OEM thermostat for a 1974 Chevy C10 with a 454?

    This is true, but this is always my quandary on reboxed parts. Are they built to the same specifications? We know Wix makes both Napa filter lines and carquest filters and Microgard, but we also know from independent oil filter test that they are not all the same. Wix branded filters and the...
  7. S

    Where can I get an OEM thermostat for a 1974 Chevy C10 with a 454?

    That's a really good question. IDK what the deal is with motorad, they have always been crappy. When they bought out stant I thought they'd improve, but now the stant name is gone and motorad is the same poor quality, although now motorad is much easier to find :(. Murray thermostats are...
  8. S

    Where can I get an OEM thermostat for a 1974 Chevy C10 with a 454?

    Earlier I said that the A/C Delco stats were out of production and I guess I was wrong. We have a wholesale supplier at the shop that is an A/C Delco distributor and I was told a few years ago that they were out of production for these trucks, but obviously I was given bad information, thank...
  9. S

    What have you done to your square lately??

    My answer is it depends on how bad it is. It is much, much easier to keep an engine bay clean than to try to scrape years of build up off. So for my monthly (I don't really keep track but roughly about once a month), underhood cleanings I use a couple of rags and a product called silk shine by...
  10. S

    Where can I get an OEM thermostat for a 1974 Chevy C10 with a 454?

    I agree with that. You won't find A/C Delco or Delco branded thermostats anymore for these trucks they are long out of production and sadly stat brand is gone too. I'd probably pick gates over motorad, and premium over economy. EDIT: UPDATE, I was wrong about the A/C Delco stats being out of...
  11. S

    Adding 81-82 bumper fog lights

    I have head of guys doing that, but I've never seen the install so I'm not of much help, but. If I were doing it, I'd leave the OEM lens in the bumper and install a pair of Hella 450's or 550's whichever is the closest size to the opening right behind it. Aiming them would be a pain due to...
  12. S

    Small Block Lifter Premature Wear

    Right that's a really good point to and is part of the reason most cam manufactures recommend that you fire the motor and run it to 2K for 20 minutes. And you HAVE to have enough zinc in the oil during this process. Some will want you to shut the engine off let it cool for a bit and then do...
  13. S

    Small Block Lifter Premature Wear

    I'm seeing this thread kind of late but I want to reiterate a few points. Yea, oil has changed in leaps and bounds and in many ways it's been good. We see very, very few engines with sludge issues, where it use to be common place, I'd say that's the biggest plus to the changes. But zinc...
  14. S

    1996 Grand Cherokee transmission rebuild & on to other stuff

    I agree. Honestly my favorite thing about the sunroof both in the Jeep and the wife's van is the amount of extra light it lets in the vehicle on cloudy days. The only time I shut the sunshade is when it's hot enough to run the A/C.
  15. S

    Door Hinge Pins Not Seating?

    I've hammered them in before, sometimes that works sometimes you beat them to death or shatter the bushing. The correct way is to use a press, with the hinges off the truck but who wants to do that? If you can get a ball joint press or something similar (you should be able to barrow a ball...
  16. S

    Hard Start when engine is warm.

    I second that concern as well. If the carb is setup so rich that it fires up cold just fine then it's running to rich, more than likely and that could be part of your hot start problem as well. I think if it were me and I did not have the ability to tune a carburetor myself, and I don't just...
  17. S

    Hard Start when engine is warm.

    The metal fuel line is somewhat reflective to heat where as rubber line will soak in the heat and that is part of what Eric is saying. If after you shut it off the rubber line absorbs enough heat, it can boil the fuel in the line causing the pressure in the line to go up forcing fuel past the...
  18. S

    Hard Start when engine is warm.

    I agree with the boiling / percolation thing. Also if your heat riser is stuck shut or partially shut that will exacerbate it. If your running an aftermarket carb (or even the factory one) a phenolic heat spacer can make a big difference.
  19. S

    Tachometer replacement thoughts

    When my Dad bought his 78 K20 is 80' with 25,000 miles the clock was already dead....
  20. S

    Lotsa nice squares on CL out here right now!

    You so funny. Only $50 for 10 gallons.... gee that's terrible. Certainly I would not dd that truck!
  21. S

    1996 Grand Cherokee transmission rebuild & on to other stuff

    I wasn't sure and you got someone involved that knows. Thanks. Right I know regluing failed material is a band aid at best. In the case of the sunshade I did it because it was hanging down and really didn't know what else to do. I figured the only way to get the panel out was to pull the...
  22. S

    Lotsa nice squares on CL out here right now!

    Damn that would make a nice tow rig!
  23. S

    1996 Grand Cherokee transmission rebuild & on to other stuff

    Ok I could use some ideas here. The headliner in the Jeep has become somewhat of a problem. Specifically the shade for the sunroof. The headliner material wraps around the "board" or shade, and it's been impossible to get it wrapped back around. I've reglued the fabric a couple of times, but...
  24. S

    Charcoal / vapor / evap canister, how it should be set up and other information

    @Frank66 You are welcome, I'm glad you found the information useful.
  25. S

    Heater Core how to

    If the summit unit works for you please post the info. I was not crazy about the fitment of the NAPA unit, but it didn't hit the case for me, either.

Latest posts

Forum statistics

Threads
44,391
Posts
956,269
Members
36,681
Latest member
91k5user
Top