Search results

  1. S

    GM Delco CB Radio

    My dad had a 78' GMC K20 with AM/FM/CB combination radio that had an 8 track player in it was well. He had the windshield antenna and a dedicated CB whip on the roof. I have to admit I kind of miss the CB radio, what I don't miss is trying to understand someone giving out important...
  2. S

    Softopper - I've been waiting for

    I think that I will apricate and like the versatility of the softopper vs a traditional topper, and I like the look. I think the look of the softopper fits with the look of the work truck, though I must admit it also say lets go camping, which is just fine with me. It's unlikely it'll ever be...
  3. S

    Softopper - I've been waiting for

    And just tagging a few people that I think might be interested @77 K20 @DoubleDingo @Grit dog @Radiohead I'm sure there are more folks that would be interested and I'm sorry if I missed you. I'm pretty excited about the softopper!
  4. S

    Softopper - I've been waiting for

    Now for my question to anyone that owns or has owned one of these things. First off I wonder if I should shift the bedrails forward some. Second question, the corners seem so bloody tight. I was able to get the snaps snapped by hand, but it took a bit of tugging. I think that the answer...
  5. S

    Softopper - I've been waiting for

    I didn't really take pictures of the install, but I did take pictures of it after install. It's pretty simple, clamp the softopper rails to the bedtop, install the frame on the pivot, tighten the 4 straps, one in each corner and snap the snaps. I think it took all of about 20 minutes to...
  6. S

    Softopper - I've been waiting for

    Preface this is not a question per-say but there is a question I will ask near the end more over this is just showing off something I've wanted for years. That's a Softopper. If you don't know what it is you will by the time I get though. These things cost like $1,100 new. No way am I...
  7. S

    Exhaust single to dual on a tight budget - Then we get into some after issues

    Ok more of the SRO Chit show. You got your popcorn @SquareRoot - Mike. :) So what I discovered is that the valve I have simply lets to much flow and the adjustment is to sensitive to minor movement in adjustment. In other words if I crack it open 1mm it's flowing to little at 2mm it's to...
  8. S

    Exhaust single to dual on a tight budget - Then we get into some after issues

    Yea, and just one seemingly simple thing has lead to this rabbit hole.... But I'm getting closer to being out of it, and certainly when I can afford the cats I'll be all the way out of it.
  9. S

    Exhaust single to dual on a tight budget - Then we get into some after issues

    Ok so I setup the water "injection" last night. First lets talk about the setup, then we'll talk about the results. So my first issue what where to have the water enter at. I knew I wanted it to enter where the PCV valve line goes into the carburetor, because it's at the base of the...
  10. S

    good oil info in general,and bonus info for cams

    It won't allow me to copy and paste, but the four rules on page 3 I think it was. Man everyone should read that. Basically that's the confirmation we all needed to see to know that basically any oil not GF-4 spec'd is ok for our engines at least in stock form. A good read I will finish the...
  11. S

    EFE, traditional Heat riser & thermac informational

    That's my plan with the 305, when it's done I'll likely install a stock or near stock 350, but I'll still run the EFE and the thermac.
  12. S

    Exhaust single to dual on a tight budget - Then we get into some after issues

    I yanked the wrap off the pipe today. I cannot stand the smell from it IDK what the deal is with this wrap but it smells like hell. I'm going to do the basic vacuum operated water injection system. I'm not really sure when I'm going to install it. Going to ported vac on the vac advance, and...
  13. S

    EFE, traditional Heat riser & thermac informational

    Nice work, and it payed off for you with a better running vehicle. If I had to make the choice I would choose a working thermac over a the heat riser, for basically the reasons you state. The thermac can be a VERY good thing in freezing whether whether the engine is warmed up or not.
  14. S

    EFE, traditional Heat riser & thermac informational

    So I think the only thing I have to say about the choke thing, is that there is a crossover and heat riser / EFE on trucks even with an electric choke. The biggest difference is just the electric control on the choke. My article is really specific to the square body, but certainly the...
  15. S

    Finished up dual battery installation, working well.

    Ya, my van was setup like that where the charge wire came inside to the amp meter gauge on the dash. In more recent years I've owned to class-C motorhomes on the 70's van chassis, up until 2016 when we bought a 99' on a chev chassis with the 454. To be honest I kind of miss the old Dodge's, I...
  16. S

    Finished up dual battery installation, working well.

    Funny story. Back in the middle 90's we were just scraping by financially for a few years in there, and I was driving a 1973 Dodge van, this old van had just about everything wrong with it that wasn't an absolute requirement to go down the road. One of the plans for our financial recovery was...
  17. S

    Code thrown but not for my year/MAP issue

    @Jawzjeep I don't really have much to add to the conversation, I just came along read and thought I might be able to help but Andy and Taylor have given excellent advice and there is nothing for me to add other than to say listen to their advice it's good info!
  18. S

    Finished up dual battery installation, working well.

    I have toyed around with the idea of doing this, but I'd want the second battery to be isolated and I'd want an override switch in the cab. For me there are times in the winter that I need to use the lights from the truck to illuminate something on the farm. Generally that is something broken...
  19. S

    Oil filter part number

    Interesting on the oil pressure thing. I wonder why that would occur, perhaps oil flows better though the larger filters IDK. BTW the price I mentioned was from a wholesale supplier, but I just looked and I don't know why I hadn't thought to before. http://www.discountfleetsupply.com/ If you...
  20. S

    Oil filter part number

    Not to steel the thread but if I may ask a sub-question, to Scott's question. The WIX 51794 AKA big filter, anyone find an inexpensive source for these? I run the 51061's but the $17 or higher price on the 51794's have kept me from running them. Thanks.
  21. S

    Exhaust single to dual on a tight budget - Then we get into some after issues

    I agree, one of the guys at the shop thought any kind of shielding was unnecessary and overkill, and he maybe 100% right. To me running around the country side and into town, I even hauled a couple loads of manure before I'd done anything. It's more about not taking the chance with the truck...
  22. S

    Exhaust single to dual on a tight budget - Then we get into some after issues

    Below, here you can see my crappy looking welds. I did this on the farm using the farm's Chicago electric welder. I can make strong welds with it, but not pretty welds. Need to use the shops Cornwell welder for pretty. Would have been a lot easier if I'd of welded it on before I installed...
  23. S

    Exhaust single to dual on a tight budget - Then we get into some after issues

    Ok well this is where I'm at with shielding now. Below: This is what I got done at the shop on Wednesday. @bucket no it's not self adhesive, standard wrap and clamp I did not wet it down before install. Not sure if maybe you can tell something by the color of the wrap. So wrapped the pipe...
  24. S

    Exhaust single to dual on a tight budget - Then we get into some after issues

    I really have no idea, it's been hanging around the shop for around 5 years. It was in a plastic bag with a label that said "Fiberglass header wrap". Nothing else. I know at one time it was in a cardboard box with a sheet of paper which likely had info on it but that disappeared at some...
  25. S

    Exhaust single to dual on a tight budget - Then we get into some after issues

    Ok so I started on shielding for the hydraulic pump for the bed dump. Specifically all I have done is wrapped the bit of tail pipe that the hydraulic hose is close to. And wrapped the hydraulic hose with heat resistant tape. I did this Wednesday at the shop, and that's as far as I've made it...

Latest posts

Forum statistics

Threads
44,391
Posts
956,320
Members
36,683
Latest member
aim410x
Top