Search results

  1. Redfish

    Cruisin the Coast 2024

    I have been working to get The '87 ready for its annual trip to the Mississippi Gulf Coast. My favorite ex brother in law is ready to go with his Trans Am, I made a few minor adjustments to it last night. Who else is going this year? It's a wonderful event, last year had over 10,000...
  2. Redfish

    Rims won't fit on rear with drums.

    I don't think you understand how the spacer is built. The spacer would have its own studs. The existing wheel studs use conventional lug nuts to hold the spacer onto the drum. The spacer has its own studs that you then use as you normally would. I do not advocate using spacers when you...
  3. Redfish

    87 TBI 350

    Well, these things have an O2 sensor and with the smog pump not pumping air into the exhaust manifolds you may have some issues. On my '87 I started replacing everything that was electronic that could affect the motor since all of it was original to 1987. The knock sensor helped. The MAP...
  4. Redfish

    87 TBI 350

    What is your timing set at? Did you unplug the magic wire to set the timing? Is your knock sensor working correctly? The MAP sensor? The '87 TBI 350 is rated at 210 horsepower...but some say that's optimistic. My '87 is a shortbed 4WD with the 4 speed manual and 3.42 gears, 33x12.50 mud...
  5. Redfish

    Rims won't fit on rear with drums.

    Yes. Tire quality has more effect on balancing that the rim quality. Mostly because the tire is further from the center and any weight differences have a greater effect further from the middle/center of rotation.
  6. Redfish

    Rims won't fit on rear with drums.

    I am not trying to make this worse for you but I am running 33x12.50 mud grips and they don't need that much weight. If you have that much lead on that wheel something is wrong.
  7. Redfish

    Rims won't fit on rear with drums.

    What amazes me is the amount of wheel weights you have. Can you post a better pic of that? Something is VERY WRONG if I am seeing that correctly.
  8. Redfish

    New here from ponchatoula,La

    Welcome from the bustling metropolis of Prairieville, LA. I do believe there is another forum member in the Ponchatoula area also. I will be driving through your town in just over a week on my way to Cruisin the Coast.
  9. Redfish

    2.5" or 4" Lift 1986 K10

    @danzey here are a couple of pics of my spring removal. I took the bottom, short spring off each side. In the second pic you can see the bolt that holds the springs together that you will need to shorten a bit. If you don't cut the end off the cap that bolts down on top of the springs will...
  10. Redfish

    2.5" or 4" Lift 1986 K10

    @danzey your truck looks good. You have a lot of potential there. What are you going to do about a front bumper?
  11. Redfish

    2 inch Rough Country Lift 76 K10

    I have done several things to improve the "ride quality" but this is still a solid front axle with leaf springs truck. The ride is not exactly quality... I could not run Nitto or Toyo tires on this truck because they don't belong on it. That's a "period correct" thing and it's just my...
  12. Redfish

    What have you done to your square lately??

    Trying to give The '87 a little more...Offroad Cred. I installed a set of Engineered Vintage Shackle Brackets and a new slotted front air dam. Finished it off with a pair of red shackles from Harbor Freight. Gave it a sort of AT4/Trailboss vibe with the red tow hook thing. Before: After...
  13. Redfish

    2.5" or 4" Lift 1986 K10

    I am sorry I missed this thread when you first posted it. My '87 is on 2" blocks in the rear and 2.5" Skyjacker Soft Ride springs in the front. In fact, I removed the bottom spring out of the stack so closer to 2" in the front. 33x12.50 Coopers. I still have the OE steering arm. I don't...
  14. Redfish

    Let's see those 4x4 Squares On Dirt!

    Just minor stuff. Lots of little branches, a few bigger ones. That's what I am doing in those pics. A limb broke out of a water oak but didn't make it to the ground. I tugged it out and away. We never really lost power. We did lose the Internet and Cable for about 36 hours! My parents...
  15. Redfish

    Let's see those 4x4 Squares On Dirt!

  16. Redfish

    What have you done to your square lately??

    We will take this one, next time it's your turn! Truck is as safe as I can make it right now. I am going to deal with this one but I am NOT going through another hurricane without a decent winch on one of these GMC trucks. Also, these "store bought" Cooper mud grips are not even a pale...
  17. Redfish

    What have you done to your square lately??

    I put it in 4wd to move some things around in the yard. Then I parked it under the carport with the Duramax parked in front of it. This may sound like a useless post but I assure y'all it isn't. In just a few hours a Category 1 Hurricane is going to pass right over this house. I sure hope...
  18. Redfish

    Vintage Air Gen V (5) or replace existing compressor, etc., for 1987 R20 Suburban?

    Vintage Air does make a quality product and from my limited personal experience their customer service is decent. I recently did some electrical troubleshooting on a couple cars with Vintage Air and their schematics were well drawn, their product is good quality. However, starting with your...
  19. Redfish

    What have you done to your square lately??

    I got my window motor from O'Reilly's Auto Parts. I just checked and they stock Dorman regulators which are about as close to OE as I have found. They are around $62 here, close to Baton Rouge, Louisiana. I don't know if you have O'Reilly's up where you live but they can usually get anything...
  20. Redfish

    1987 TBI fuel pump issue

    Is the switching valve working properly? They do go bad eventually.
  21. Redfish

    Let's see those 4x4 Squares On Dirt!

    I have been looking at Engineered Vintage very, very hard. They seem to make an excellent product. My issue with a Behind the Bumper mount is that I will have to get down on my hands and knees each time I need to engage/disengage and each time I need to connect/disconnect the remote wire...
  22. Redfish

    Two bad new oil pressure sensors? Tell me I am wrong.

    The sensor shouldn't need a separate ground. They didn't come from the factory that way, why change it now? I personally had two oil pressure sensors go bad on my truck with very little run time on either. You can see how new this one looks and it was already bad.
  23. Redfish

    Let's see those 4x4 Squares On Dirt!

    Is that a hidden winch in the bumper of your red Chevy? If so can you tell us what mount and what winch?
  24. Redfish

    Free Rear Bumper for your Chevy/GMC with Steelcraft Front Purchase

    And no place to mount a winch to make it useful.
  25. Redfish

    What have you done to your square lately??

    The second thing I did was install a new Skyjacker steering damper. I installed a no-name O'Reilly's damper when I first got The Truck but it is already leaking all of its oil and y'all know I don't put a lot of miles on this Old Truck. The pic shows my next project, a set of Skyjacker Hydro...

Latest posts

Forum statistics

Threads
44,173
Posts
950,886
Members
36,291
Latest member
tannerscarber
Top