Search results

  1. 1low4x4

    centering steering wheel

    Yeah, See the truck doesn't pull one way or the other, just the steering wheel is off and my turn radius is greater when turning to the right than it is when left. I tried to correct that by removing the drag link from the pitman arm, turning to the wheel to and fro and tried to guess...
  2. 1low4x4

    centering steering wheel

    Hey guys how do you center the steering wheel? On my truck the wheel can only go on the column one way because of the horn button mechanism inside the column. Do you adjust it at the rag joint /steering box area? I can't remember if there is a keyed groove on the shaft of the box or if you can...
  3. 1low4x4

    What is this squeak? Trans?

    Turns out it was the speedo cable in the cluster. Unplugged that shit it way off anyway
  4. 1low4x4

    Engine help

    Are you turning the dizzy back and forth when trying to start each time to retard and advance the timing to see if it will start
  5. 1low4x4

    Trans Fluid pouring out of np208

    I just read on another site that there is no output shaft seal on a 4x4 trans, there is only the input seal of the case. Then there is a gasket between the case and adapter, and an o ring between trans and adapter
  6. 1low4x4

    Trans Fluid pouring out of np208

    http://www.makcotransmissionparts.com/331304B.html case to adapter gasket
  7. 1low4x4

    Trans Fluid pouring out of np208

    output shaft seal on trans? looks weird http://www.rockauto.com/en/catalog/chevrolet,1984,k10+pickup,5.7l+350cid+v8,1299708,transmission-automatic,output+shaft+seal,8636
  8. 1low4x4

    Trans Fluid pouring out of np208

    Heres the transfer case input shaft seal I found, yall check and see if yall think its the right piece. About to search for the trans outputseal, but I cant find anything so far on the gaskets for the mountbetween the case and trans...
  9. 1low4x4

    Trans Fluid pouring out of np208

    Thanks, but I meant about cracking the transfer case in half. Is there anything in there worth changing out or looking at when I take the case out of the truck
  10. 1low4x4

    Trans Fluid pouring out of np208

    yeah, I've been adding trans fluid and wondering where it goes. This morning after the tcase fiasco I put two quarts in the trans again. Ok, Well Ill source the output and input seals and do that hopefully next weekend. Its the biggest issue with my truck right now and has priority. Also...
  11. 1low4x4

    Trans Fluid pouring out of np208

    Can anyone provide more info on this seal, or what all it takes to fix?
  12. 1low4x4

    Energy suspension Leaf spring bushing kit

    Buy these http://offroaddesign.com/catalog/hdshackles.htm
  13. 1low4x4

    Lacking power? Look at your carb

  14. 1low4x4

    Lacking power? Look at your carb

  15. 1low4x4

    Lacking power? Look at your carb

    Well I am very glad to post this. I rebuilt this crate 350 about 6 years ago, and three years ago I started trying to get more power out of it. I had already put flattop pistons in it, so on went a set of vortec heads, a bigger cam, headers and Electric fans and lower gears, anything and...
  16. 1low4x4

    Trans Fluid pouring out of np208

    Im so Effing sick of this truck. This is just one of many problems Ive been having. For months Ive had large amounts of trans fluid on my rear axle, shocks, bumper, tailgate, and it also covers any boat or trailer I pull behind me. I noticed fluid on the t case but also noticed that my trans...
  17. 1low4x4

    What is this squeak? Trans?

    Ujoints are new
  18. 1low4x4

    What is this squeak? Trans?

    Hey my truck been making a faint rotating squeak for a while now and its getting louder as time passes. Only when truck is moving down road. Slows and quickens with the speed of the vehicle. Sounds awful close to the drivers firewall andI cant for the life of me think what it is. Not wheel...
  19. 1low4x4

    Screwed up my 12 bolt

    I have an inch pound torque wrench but didn't use it. I just tightened to feel by spinning it by hand. I got about 0.012 backlash. didn't even use the paint cause we never did when I was growing up building racecars with stepdad. The 500 mile oil change will be a good reason to install a big...
  20. 1low4x4

    Screwed up my 12 bolt

    I have a digital caliper that I used. The overall length of the ujoint fit the yoke, just the caps were to big in diameter. yeah I did the gears myself. I was able to match up existing shims pretty much and check from there. Everything works good
  21. 1low4x4

    Screwed up my 12 bolt

    Well the ring and pinion and install kit worked great. The yoke didn't. And I didn't check it before installing it so im out 100 bucks, my caps were too big too fit in it evenm though I measaured them before hand and chose what I thought was the right yoke. Had to go back to the old yoke. But I...
  22. 1low4x4

    No starting problem

    I had issues like this with a street fire hei dizzy and ended up doing like you and dropping a new one in. Fixed the issue and never looked back
  23. 1low4x4

    No starting problem

    Then it's a problem in that distributor. Did you check the ignition control module with a meter to see if it's good as far as resistance? I'd change that thing with a new one. Had this happen to my dads truck and that's what fixed it after I replaced everything else.
  24. 1low4x4

    No starting problem

    This is TBI? It's odd you hear fuel but no start... On TBI without spark there is no fuel given
  25. 1low4x4

    No starting problem

    Did you recently mess with the dizzy and if so is it pointing to TDC and are all the spark plug wires right. Swap out the little flat coil under the rotor also

Latest posts

Forum statistics

Threads
44,175
Posts
950,927
Members
36,297
Latest member
DrewS4
Top