Search results

  1. 1low4x4

    Calculating compression ratio

    fucckkkkkk
  2. 1low4x4

    Calculating compression ratio

    ANd another calculator says 9.56:1.
  3. 1low4x4

    Calculating compression ratio

    So, Last time I called Comp cams, they wouldn't or couldn't recommend a cam to me, even with all my engine specs, without a compression ratio. My guess is they don't really know without the computer telling them, and the computer requires a compression ratio. So.. I looked up a compression...
  4. 1low4x4

    86 K10 5.3 swap

    I admire the work that goes into this. With all the shit I do on all my squares I figured Id have done an LS swap by now but I don't want the headache
  5. 1low4x4

    2 piece rear main seal advice

    Thanks for the insight. Im not worried about it needing rebuilt, I may get to this today
  6. 1low4x4

    2 piece rear main seal advice

    Guys I think ive got a leak from the rear main seal, not sure but going to pull the dust cover and look around. I bought the good Felpro blue gaskets. Ive read some stuff about how they never really seal up. Will I be wasting my time doing this or should I give it a go. Ive heard all kinds of...
  7. 1low4x4

    Extended rubber brake lines for lift?

    Ok. Couldve sworn someone told me once that they had an option for longer lines on one of these models. Ill just order the braided ones from ORD
  8. 1low4x4

    Extended rubber brake lines for lift?

    NOT stainless braided lines. I can get those online but Im looking for longer rubber lines that I can use on the front and rear of my k10 with 4" of lift that I can get locally, i.e. Oreillys etc. Any idea?
  9. 1low4x4

    por15 good or bad?

    Por 15
  10. 1low4x4

    Questions on paint

    few months old but bump for this man
  11. 1low4x4

    Wow !!! Twin Brand New 87 Buick Grand Nationals

    All I need is a rich friend
  12. 1low4x4

    por15 good or bad?

    Heres mine just about finished up. All POR products
  13. 1low4x4

    por15 good or bad?

    Bam.
  14. 1low4x4

    por15 good or bad?

    Btw it is true that some surface rust helps adhesion. No doubt. Probably best thing to do if you brought something down to bright metal is to let it sit out overnight and develop a little rust and then hit it with the prep.
  15. 1low4x4

    por15 good or bad?

    Top pic of axle is before I wire wheeled it, bottom is after I wire wheeled it and used the metal prep. It primes the surface for the paint.
  16. 1low4x4

    por15 good or bad?

    Got to use the metal prep. Got to Got to
  17. 1low4x4

    por15 good or bad?

    Wrong info. POR 15 is not a rust converter it's in encapsulator. Meaning it seals the surface so no moisture can get in and form more rust. The converter part is the POR 15 metal prep you spray on it and hose off before you do the paint. You can absolutely take it down to Bright bare metal and...
  18. 1low4x4

    por15 good or bad?

    Check out the last several pages of my build thread http://www.gmsquarebody.com/forum/showthread.php?t=13447&page=75
  19. 1low4x4

    Slip on rockers vs replacement

    Previous owner installed the rockers and door sills right over the rotted ones on my truck. If they would have finished the job and welded it right behind the cab, youd never know. But they didn't, and now I have to finish it
  20. 1low4x4

    Total Failure of Front Disk

    I came here for pictures and was terribly disappointed.
  21. 1low4x4

    Electric fan Conversion

    This is actually one of the only forums where asshole members don't say "use the search bar" when someone posts a FAQ. And I like it that way.
  22. 1low4x4

    Downside to Vortec heads

    excuse me, they weren't GM, but Elgin Springs. Intake was Cyclone made in USA.
  23. 1low4x4

    Downside to Vortec heads

    The springs were new gm. Just because I got them off eBay doesn't mean they were junk. The intake is a name brand made in usa as well. Y'all just like to pick an object and hate on it?
  24. 1low4x4

    Downside to Vortec heads

    Besides aluminum heads, the vortecs. 305 heads on a 350 was always a laughable matter. TBI heads are junk. Nothing TBI translates to performance. I've told you what I have I'm my vortec head swap. They work....give me $600 for the alums and an extra 250 for top end gaskets and ARP bolts and I'll...
  25. 1low4x4

    Downside to Vortec heads

    Uh, my vortec heads were like 80 bucks. Intake was $130 I think? Bought the springs and seals off eBay for like 50 bucks. I'm running stock center bolt valve covers. ..that's no where near 600 dollars. Now I spent coin on arp bolts and shit. But Either vortec or aluminum you're going to need...

Latest posts

Forum statistics

Threads
44,173
Posts
950,869
Members
36,289
Latest member
HT2abbottrl
Top