Search results

  1. Fat 454

    350 to 454 in a K10: What Motor Mounts?

    look at swapping in a rear 14 bolt full floater 8 lug with an lsd ( can be found cheap from a wrecked C20 ). You will need a matching set of 8 lug front rotors for the Dana 44 from Rock Auto ( No real advantage at the front, but allows a full set of 8 lug rims all 'round ) - until you can locate...
  2. Fat 454

    Painting rally wheel rim

    My 10c - when painting wheels ABSOLUTELY you must paint the inner surface. I have just had a set of 8 x 15 rims blasted as they had heavy rust, but I hate throwing good stuff away ( apparently 8 lug 15's are difficult to find now ?? ). The rims were primed in a cold GAL primer, that is a good...
  3. Fat 454

    GMT 400 Suburban dually - info ?

    oh and its 4x4 too ( and I think has a diesel, but not sure yet )
  4. Fat 454

    GMT 400 Suburban dually - info ?

    Hi All, can anyone shed any light on this vehicle style. My son is looking at buying a GMT 400 crew for a work truck, and this popped up. Probably going to be counted out as running costs will be through the roof with duals etc., however I have not seen many, and assumed they are quite "rare" (...
  5. Fat 454

    Adding 4WD, where does the shifter go?

    stupid thought - but could you not use the floor hump from the old cab to located the shifter holes? If not, I would set the floor up for a bolt in high hump. Then you can find a couple in the junkyard and refine the position using card templates or similar.
  6. Fat 454

    I need a donut

    went to buy parts at a local auto store recently ( CV Boots ) and told they could not supply ( not stocked ) even when we provided make, model, year and OEM part no. Went back with an old aftermarket ( their "home " brand ) box showing part numbers and they found them on the shelf. Apparently...
  7. Fat 454

    How can i separate my rotor from hub? Looks like its all one piece need help!

    If you need to get drums or discs re-machined properly, I find most of the Ag store / tractor supply shops in our local area are the best bet. Good service, right equipment and quality work. Maybe a different mentality compared to the auto parts stores ( long term maintenance v. chuck out and...
  8. Fat 454

    Best media for blasting the body

    Hi - really don't want to be the "safety nanny" here but... DO NOT use regular sand for any abrasive blasting. When the sand hits a surface it fractures and the resulting finer silica powder if inhaled can cause respiratory diseases like silicosis. Better options would be garnet ( silica free )...
  9. Fat 454

    1987 Suburban v1500 - what separates the v1500 and v2500?

    Hi only real difference between the rated trucks that you cannot change with bolt-ons ( diff, axles etc. ) is the frame itself. Modulus refers to the flexibility or "bending" resistance of the frame when under load. This is a standard structural engineering term, and you can look it up easily...
  10. Fat 454

    Diesel heater installation

    Podmiejski - 'suburban" in Polish - that's hilarious - just found a new nick name for my 'burb - I mean 'miejsk...
  11. Fat 454

    Crewcab body swap on Regular Cab C&C 159.5" WB?

    Hi - just read through the thread and wanted to weigh in here with my 10c .. we looked at putting a crewcab body on a long wheelbase single cab frame. We had all the parts and lifted the cab on. As @bucket says, if the frame kicks up behind the cab ( which our frame did ), there is no way a...
  12. Fat 454

    Stock 1976 C10 - Need Wheel/Tire size help!

    so that's what a squarebody looks like before the rust sets in, wow !...
  13. Fat 454

    New 85 Blazer

    Welcome. I had an early bronco also - I think it was a '76 - anyway had dual tanks, no roof and lifted on 33's. Great truck, but too small for me and my better 1/2 to go into the mountains with a couple of Mtn bikes, camping gear etc. That is what first got me into chevys - I started looking at...
  14. Fat 454

    78 Surburban Revival

    That is awesome, welcome to the Sub owning fraternity !!. I thought my 4x4 was rusty ( ill post a pic, may give you a run for your money ). Definately go back to the forest green. I have a burnt orange / white combo thats going to be painted up as a forest ranger truck when done. Metallics don't...
  15. Fat 454

    I just bought a John Deere tractor!

    Tractors are awesome. We have a couple of "blue " models, they can: * tow your projects when there is no motor in it * push your projects into the barn ( even if there is no ramp up ) - build a thick wooden push block for this ! * if you have a loader attachment with forks then they will lift...
  16. Fat 454

    New member

    Welcome - yes more pics please - that looks super nice, we love crews!.. @Corvette Ed - are you Donald Trumps great, great grandson ??
  17. Fat 454

    New from NY

    welcome @Supermag ( from OZ ). Ha Ha "Active", the trick is getting us to shut up!.. pics pics pics. Build threads are what its all about on here...
  18. Fat 454

    sbc 350 oil pressure from 60 to 5

    honest question - why would you recommend mechanical rather than electrical? I would have thought having a wire running the length to under the dash would be easier than a pipe, provide a faster signal, and not have the potential issue of a messy leak in the cab. I am assuming the electrical...
  19. Fat 454

    14 bolt question

    My '73 2wd C20 burb came with a FF 14bolt from the factory. I would think it was part of the 3/4 tonne trailering option package available on the SQBodies. Didn't think it was that unusual ??
  20. Fat 454

    Lost my rear end.

    As the truck is your daily, I would suggest finding another used axle and swapping it in just to keep you going. Changing axles and wheel bearings is no big deal, however getting the crush / wear pattern / spacing correct on the pinion to ring gear is much more involved. There are plenty of...
  21. Fat 454

    TH400 Information Thread

    thanks guys - appreciated. I will look them up and see what their shipping is like. As said, will probably buy a core and do a full rebuild and then swap them out. I'll report back how it all goes. Oh, by the way a "rebuild " core here is around A$1,500.....
  22. Fat 454

    TH400 Information Thread

    Also interested in anyone's list of "must have" upgrades for reliability - ( shift kit, clutches, HD C clips etc. ) - truck will be stock ( changing from dually axle to SRW ) , and just used for normal truck stuff - highway hauling and some towing. No racing or tractor pulls !! Oh, and its a...
  23. Fat 454

    TH400 Information Thread

    Hi Nick and all, who are your recommended go to suppliers for T400 service parts ? I will also note that I am not in the continental US, so will need to mail internationally, however we get all our other parts that way so no big deal. Use Rock Auto for a lot of stuff, as well as the usual LMC...
  24. Fat 454

    4L65E Mega Monster Transmission - Destruction and Shift Kit check balls

    Hi Nick - may or may not be of help, but check out Shaun's YT channel - "Mountains garage". We have a T400 that needs a strip and investigation as no reverse. Came across Mountains when looking for info on the reverse solenoid set up. It seems hard to locate detailed clear information on...
  25. Fat 454

    2WD to 4WD frame swap. Is it really that simple??? Help me out!

    Hey Ranch Welder - that is the coolest post I have read ever !.. Couldn't agree more about the value of the journey. Still think its funny offering someone from Texas to go to another state as they have "more " of something !!. Will definately take you up on this next time we can head that way...

Latest posts

Forum statistics

Threads
44,173
Posts
950,867
Members
36,288
Latest member
brentjo
Top