Search results

  1. Boone83K10

    Want both gas tank fillers on the same side

    Yeah well the guy that did it had like 22 inches of lift or something crazy on a crew cab.
  2. Boone83K10

    Lock Up Converter Vacuum Switch FAIL???

    Val, just run a manifold vacuum line to it and see if it works. You cannot buy a GM tcc switch anymore. There isn't that much to fail on these. You can get one in a junk yard or buy the TCI aftermarket which comes with a new vacuum switch.
  3. Boone83K10

    Im at a loss with my brake lights

    yes...see here ---> http://www.gmsquarebody.com/forum/showthread.php?t=7823&highlight=brake+light+problem either read whole thing or start at post #42
  4. Boone83K10

    Want both gas tank fillers on the same side

    His ran across the middle cross member under the bed. He was also welding brand new tanks
  5. Boone83K10

    Im at a loss with my brake lights

    This sounds kind of like the problem I had. Did you look up stream for any melting of the wires?
  6. Boone83K10

    Want both gas tank fillers on the same side

    There was a post about a month ago about this. One guy on another forum made it work by welding New bungs on bottom of tanks and it crossed over and both tanks filed at same rate during fill up
  7. Boone83K10

    Help with fuel gauge wiring

    neither... here is a wiring diagram for you.
  8. Boone83K10

    Vacuum Advance question

    Thank god there is no emissions where I live, only safety inspection.
  9. Boone83K10

    Vacuum Advance question

    Do you really need to hook it all back up to pass emissions?
  10. Boone83K10

    Random square parts taking up space

    28698
  11. Boone83K10

    Random square parts taking up space

    Id like the dual tank guard
  12. Boone83K10

    emissions removal 86 k10 5.7 sb, auto, air, cruise, calif emissions

    Esc is totally timing. You can remove it if you put an HEI distributor in. You should leave the pcv valve. It keeps the engine from carbon build up, plug open ports of carb. Make sure you have vented caps on gas tanks or else you will create a vacuum inside tank and will get no fuel supply.
  13. Boone83K10

    chevy 350 running cold

    BB radiator on a SB??? did you put Purple ICE in it or something?
  14. Boone83K10

    Carb Bog

    according to Edelbrock, it should have an opening of .100 of an inch when set and fully cold. So that is real small, 2-3 mm. I had to open my Holley up to about 1/4 inch because it was choking out when cold. Let engine cool overnight, come out and with air cleaner off, open throttle all the...
  15. Boone83K10

    Carb Bog

    also could be the piston inside the choke is stuck. a paper clip with a small bend at the end, stuck down the rod shaft can help break it loose.
  16. Boone83K10

    Carb Bog

    It's binding somewhere..it should be very loose because a small bimetal spring is what moves the choke flap.
  17. Boone83K10

    Carb Bog

    Maybe the spring is turning with the cap instead of coiling in. Take the cap of and put a pen in the bi metal spring loop andtry to coil tight (be gentle), if it moves freely and doesn't coil then the bi metal spring is faulty
  18. Boone83K10

    Carb Bog

    When you put the cap on, are you putting the choke flap linkage end into the cap slot, so the it moves the flap?
  19. Boone83K10

    Carb Bog

    Is your choke set to never come off. You should be able to loosen the choke cap and when you turn it either left our right, it should move the choke flap. One way closes it shut, the other way opens it up. This is setting the duration the choke stays on until warm. If you have it to far set to...
  20. Boone83K10

    Holley electric choke

    Is it a two wire or one wire choke?
  21. Boone83K10

    Electric Choke Disconnected?

    If you're running a mechanical gauge then someone has removed the electrical and your choke light will remain on. Just verify you are only getting 12v when key is on for choke, if not then trace it.
  22. Boone83K10

    Electric Choke Disconnected?

    Being that it's an aftermarket carb, people hook them up to whatever they can find. Your choke light was used in stock form, it would go off when the oil pressure switch received oil pressure. It may be disconnected at that point or you have low oil pressure. You should get your hands dirty and...
  23. Boone83K10

    Electric Choke Disconnected?

    Wire closest to front of truck is the ground wire, that looks good. Write going towards firewall is the hot wire. You need to test that wire for 12V when key is on. If it has power while off then you need to find a different 12v source. You need to trace where it goes now.
  24. Boone83K10

    Electric Choke Disconnected?

    Pics of wires and carb
  25. Boone83K10

    Overdrive questions

    I agree, it has a 3 spd indicator and actually has a 4 spd installed.

Latest posts

Forum statistics

Threads
44,173
Posts
950,889
Members
36,291
Latest member
tannerscarber
Top