Search results

  1. X-cabsquarebody

    Custom Console Build How To

    I have, but can't find any pictures of them. You just have to step the console down before the shifters or just have a console between the seats and not go up under the dash.
  2. X-cabsquarebody

    91 4L80E 4X4 trans, Western NC

    The wiring harness has all the computer plugs, trans plugs, and engine plugs. I cut it out from the firewall plug. I didn't scrap the truck. I had to have the firewall plug for the 8.1 engine swap. All the cut wires are labeled. It's stuff like power, fuel pump, brake light, etc.
  3. X-cabsquarebody

    91 4L80E 4X4 trans, Western NC

    I do still have the transfer case, but it's in my truck. It is the only piece I kept from the original drive train.
  4. X-cabsquarebody

    TBI 454 Complete. Western NC

    TBI is triggered by the distributor.
  5. X-cabsquarebody

    455 olds swap

    My C10 with the 455 would out pull my 2000 Chevy 1 ton with a 454.
  6. X-cabsquarebody

    TBI 454 Complete. Western NC

    I'm not in a hurry to sell it. It's boxed up in my storage shed, out of sight, out of mind.
  7. X-cabsquarebody

    TBI 454 Complete. Western NC

    I would like to sale it all together. Sorry
  8. X-cabsquarebody

    91 4L80E 4X4 trans, Western NC

    Depends on your current set up. It's 2" longer then a th400. Need to graft the wiring harness in, and change the computer out. Depend on your mechanical abilities.
  9. X-cabsquarebody

    91 4L80E 4X4 trans, Western NC

    Brevard NC. 20 miles out of Asheville.
  10. X-cabsquarebody

    Custom Console Build How To

    Here is a painted console that I just made for a 59 Ferd.
  11. X-cabsquarebody

    91 4L80E 4X4 trans, Western NC

    Bump. Still for sale.
  12. X-cabsquarebody

    Calibratable DRAC Module For Electric Speedometer

    DRAC module is sold. But don't mind helping out members with there module. Send me a PM if I can help. Thanks
  13. X-cabsquarebody

    TBI 454 Complete. Western NC

    TBI stuff still for sale.
  14. X-cabsquarebody

    455 olds swap

    My father swapped an Olds 455 in place of a 350 diesel back in 1982 in his 80 c10. It was a monster! I have the truck now, and sold the 455 a few years back. The guy I sold the engine to is building it to put out about 450 HP, 600 TQ. He is putting it in an 85 c10. It is a great swap! I have...
  15. X-cabsquarebody

    How To Build Custom Door Panels

    I just sold the door panels last week. I don't have any pictures from when I built them either. Best place to find the foam would be on line, our a local trim shop. Miami Corp, Keyston Brothers, or DTL will sell supplies on line. To cover a set of lower panels, 1 liner yard should do to it...
  16. X-cabsquarebody

    Custom Console Build How To

    The main thing is to plan ahead. Get all the stuff together that you want in the console, and make a mock up. Most of the time design is determined by what you put or what in the console.
  17. X-cabsquarebody

    8.1L/4L80E swap into 84 Dually

    Danny, I skipped the a/c part on my swap. I just removed the compressor and hope to find the brackets later . I haven't been able to located any yet. I would like to know we're you got yours, parts #s would would be great. If your going to run a manual fan, the 8.1 fan will not fit in the 454...
  18. X-cabsquarebody

    Built C10 front crossmember

    Yes.
  19. X-cabsquarebody

    8.1L/4L80E swap into 84 Dually

    My motorhome has a 4.56 gear, weighs 14000 lbs, and gets almost double the mileage. My truck weighs in at 8500 lbs and when it locks the converter in 4th gear at 60 mph, my RPMs are at about 1800. I have been advised that a gear swap to 4.11, 4.56 would help my truck. I have 2 91 crew cabs...
  20. X-cabsquarebody

    8.1L/4L80E swap into 84 Dually

    Im kinda late to the party,,,, but I swapped an 8.1 into my crew cab 4x4 last winter. I tow cars and tractors, and haul more then driving it unloaded. My engine is an 01 model, with about 30K miles on it. Has not used a drop for oil and gets 7 mpg no matter what. I also have an 8.1 In my motor...
  21. X-cabsquarebody

    Ignition locked up

    My truck did the same thing to me last year. I had to pull the wire to the coil to shut it off, then disconnect the battery. The key tumbler fell apart inside and all the little parts locked it down. You need to re place you ignition key lock.
  22. X-cabsquarebody

    Roof access for cab running lights.

    http://www.gmsquarebody.com/forum/showthread.php?t=6015 Here's some more info on temp mirror install, and who I got mine from. Hit up Retro, he will get you a good deal on a mirror with a sensor.
  23. X-cabsquarebody

    Roof access for cab running lights.

    All my wires run inside the A pillar. They come out through a hole up under the dash. Usually there's a rubber plug above the E-brake assembly.
  24. X-cabsquarebody

    Roof access for cab running lights.

    When I ran my mirror wires, that's how I got mine through. I pushed a piece of welding wire through from the bottom. It helps to pull the left cab clearance light out to get some light in between the inner and outer panel in the cab.
  25. X-cabsquarebody

    Dash mounted console build

    What about the console thingy? Any updates?

Latest posts

Forum statistics

Threads
44,173
Posts
950,865
Members
36,288
Latest member
brentjo
Top