Search results

  1. Obwonkonobe

    "Rebuilt" 700r4 issues

    Got some shiny adjustable stuff just now, hopefully this'll do
  2. Obwonkonobe

    "Rebuilt" 700r4 issues

    I'd appreciate that
  3. Obwonkonobe

    "Rebuilt" 700r4 issues

    Thank you all so much for your advice, Ill keep you posted
  4. Obwonkonobe

    "Rebuilt" 700r4 issues

    Good to hear, I agree. How sensitive is the tv cable to adjustment? Would a quarter inch really make THAT MUCH of a difference?
  5. Obwonkonobe

    "Rebuilt" 700r4 issues

    That's my thought, its factory. I'm gonna grab an adjustable one
  6. Obwonkonobe

    "Rebuilt" 700r4 issues

    My current set up, il probably get a bracket to hold the tv cable farther over inline with the throttle cable
  7. Obwonkonobe

    "Rebuilt" 700r4 issues

    Il probably drop the pan soon if I can't get it set right
  8. Obwonkonobe

    "Rebuilt" 700r4 issues

    I got it to work by loosening the tv cable. But now at WOT there's still a little bit more that i can pull out on the cable. Do I need to be worried about this? My shifts seem to be stacked a little bit too now that its loosened. How sensitive are these cables to adjustment?
  9. Obwonkonobe

    Is my '85 GMC 350 hydraulic roller cam or flat tappet?

    I would assume it's hydraulic flat tappet, if you want to be sure, pop the intake off and take a look, or a valve cover, maybe you could peek down the bore. I wouldn't take any valves loose though, not just to check
  10. Obwonkonobe

    "Rebuilt" 700r4 issues

    Im starting to think the same. Il probably take it to a shop and have them doubke check for me
  11. Obwonkonobe

    Need help with overheating issue on my 77 k10 with sbc 350

    I always put my sender in the manifold btw, and use a ir gun to double check the temp
  12. Obwonkonobe

    "Rebuilt" 700r4 issues

    Il have to give that a try, the builder was just over and said I needed to re adjust my tv linkage and talked me through it, il check the governor tomorrow if that Dosent work. If it is a sticking governor, should I be able to just take it out and clean it with brakleen?
  13. Obwonkonobe

    "Rebuilt" 700r4 issues

    Also, a note on my tv adjustment. I pressed the sliding bit am the way back into the housing, locked the throttle cable down with slight preload, and nailed the gas down allowing the slider to come forward as much as it naturally would, ensuring that the point of max throttle and max tv movement...
  14. Obwonkonobe

    "Rebuilt" 700r4 issues

    I was able to get my "rebuilt" 700r4 swap done this weekend, but it won't shift out of first. Im very sure now that the tv cable is right, even got the eddy adapter bit. I got it to shift once, then put it manually in first for a sec, put it back in drive, and nada. My thought is the governor...
  15. Obwonkonobe

    Where can I find new ones???

    Yea those look to be in really good condition, maybe just clean it up with a wire wheel and dremmil, sand blast, chemicals etc, whatever you like. They should take really well to some new paint
  16. Obwonkonobe

    Prepping for 700r4 goodness

    Ended up buying the thickest hose at autozone, chopping a section from the steel line, and clamping it on as hard as I could, should work well, thanks!
  17. Obwonkonobe

    Prepping for 700r4 goodness

    Good nough for me, thanks
  18. Obwonkonobe

    Prepping for 700r4 goodness

    Would you trust them to hold all the pressure? My trans cooler lines dont line up and im considering cutting the ends and using rubber hose to attach them
  19. Obwonkonobe

    Frame VIN?

    Ah my bad
  20. Obwonkonobe

    Frame VIN?

    Driverd side outer frame rail, by the trans cross member I believe
  21. Obwonkonobe

    Prepping for 700r4 goodness

    Does anyone know if rubber lines are good enough for trans cooler lines?
  22. Obwonkonobe

    Broke a 4L80e mounting ear

    If you have wood longer than the width of the pan you'll be fine to use a standard jack, I just pulled my th350 like that and will install a 700r4 the same way in a few hours
  23. Obwonkonobe

    Extended brake lines ?

    Zip ties, but shouldn't there be a bracket to hold the line? It would help to see it
  24. Obwonkonobe

    Basic valve cover questions

    Good idea, I'll have to try that here once it gets cooking
  25. Obwonkonobe

    Prepping for 700r4 goodness

    Super helpful thank you!

Latest posts

Forum statistics

Threads
44,173
Posts
950,869
Members
36,288
Latest member
brentjo
Top