Search results

  1. Ronno6

    Which 350 ?

    That is the plan. Make sure purchased parts will be usable on a 350. Should work for all except head work on 305 heads.
  2. Ronno6

    Which 350 ?

    Very useful information! ages ago the electric fuel pump just got mounted on the fire wall or fenderwell and was self regulated. It would pump up to whatever pressure then shut off. But I understand the need for all the safety jazz................. I'll definitely be seeking a motor set up fopr...
  3. Ronno6

    Which 350 ?

    As I have dual tanks, the pump would need to be external. What ever happened to the fenderwell mounted electric pumps?? No good ??
  4. Ronno6

    Which 350 ?

    How come??
  5. Ronno6

    Which 350 ?

    Interesting note about 416 heads on my engine. The serial # on my block (K0190560) does not match that of the truck, nor does it appear to be any form of s/n for a vehicle installed motor. May have been a crate motor; not sure. I wish I could see the casting # on the rear flange, but a wiring...
  6. Ronno6

    Messin' with a 305...Camshaft

    Saved a few bucks....pulled a rocker cover and found that my engine already has the 416 heads. That "just" leaves cam and intake (along with head work....)
  7. Ronno6

    Which 350 ?

    Should I forgo my notion of hopping up my 305 and follow the most popular suggestion of going to a 350, the huge question becomes: What 350 to start with?? I want NO computers, hence NO fuel injection. I want a 1 piece rear main so I don't have to purchase a new flywheel. Should I be...
  8. Ronno6

    Messin' with a 305...Camshaft

    Thanks. Definitely food for thought. As for heads, both sets which I am considering were 305HO heads. Both have 1.84" intake and 1.50" exhaust the 601's have a slightly smaller chamber to boost compression ratio to about 9.6; the 416 would yield about 9.0 but I am not sure which pistons that...
  9. Ronno6

    Messin' with a 305...Camshaft

    And....OFF the deep end we go..........
  10. Ronno6

    Messin' with a 305...Camshaft

    Thanks! Isn't that cam a bit on the mild side? What are its advantages/disadvantages? I wouldn't mind going a bit hairier.......
  11. Ronno6

    Messin' with a 305...Camshaft

    I have not purchased the heads,cam,or intake. I have 601 heads available for $50.00/pr and 416's for $100.00 both probably needing valve jobs. I KNOW that moving up to a 350 would be the way to go........but I am following the old adage "work with what you have." Much $$$$ to be spent on...
  12. Ronno6

    Messin' with a 305...Camshaft

    I am still contemplating livening up my 305. Truck is an 84 C10, but engine is a 1-piece rear seal 305, so, unsure of year. Odd serial # almost makes me suspect it is a crate motor. Tranny is Muncie M20 Rear 3.73 posi. I have Hedman 1 5/8" long tube headers and 2 1/4" dual exhaust with Walker...
  13. Ronno6

    304 Carb suggestions

    Yup. 80457S is what I purchased. The only spot of bother was fitting the fresh air intake for the PCV system to my Edelbrock air cleaner. The carb is so long that I had a hard time finding a place to route the hose that did not interfere with linkages, bowls, auto choke, etc. I finally attached...
  14. Ronno6

    304 Carb suggestions

    I wound up with a Holley Street Warrior factory refurb off ebay for $229.99 including shipping and a 1 year warranty. I received it in 2 days and it appears to be virtually brand new! It went right on and started fight up. Couple of idle adjustments later and all is well...... This was just the...
  15. Ronno6

    New interior upgrades!!

    Bummer...I need a gray seat. Thanx anyway!
  16. Ronno6

    New interior upgrades!!

    Which seat are you selling? Ron in Mississiooi
  17. Ronno6

    How Tight Carrier

    FINALLY....got the C10 back on the ground. All seems to be well with the differential....no whining or growling. I think I may have done it right................
  18. Ronno6

    Mixing JB3 and JB5 brakes

    I definitely had shoes installed correctly. As a follow up, I finally got the truck back on the ground after installing 3.73i posi in place of the 2.73 open diff. I upgraded the rear brake system to JB5, same as on the front. Rear skidding is OVER.....matching components did the trick.
  19. Ronno6

    304 Carb suggestions

    Excellent.Thanks. Still considering the Holley Street Warrior....
  20. Ronno6

    304 Carb suggestions

    Thanks! Do you have the part # for the carb? The standard is a 4478. I am not familiar with the term "Level 2" I have found a great deal on a Holley Street Warrior, but it is a manual choke. 600cfm and virtually new. I am thinking.........
  21. Ronno6

    304 Carb suggestions

    1984 C10 305 w/manual tranny. As purchased the truck has a very worn Edelbrock 1406. Throttle shaft and bore so worn that it sticks open when running unless I really put the tension to the return spring. Really makes driving with a manual tranny a pain........ So, I seek suggestions as to what...
  22. Ronno6

    How Tight Carrier

    Nah...brand new Yukon posi carrier and Richmond Gearz..........
  23. Ronno6

    How Tight Carrier

    I had thought about the stacking of tolerances, but, as the TIR is same for both parts, I can't think it can be improved by changing the orientation. I am not certain that the measurements are the same at the same point on each part (I may verify that,) but still do not believe I can do much better.
  24. Ronno6

    How Tight Carrier

    I have rechecked and do indeed find extremes as I posted. Most readings are .007" to .008" I checked the lateral runout of the back side of the carrier flange and found a TIR of .003" This matched the runout I measured on the backside of the mounted ring gear. Is that normal/acceptable?? I...
  25. Ronno6

    How Tight Carrier

    The rear axle is out of the vehicle and sitting on a couple of jack stands...

Latest posts

Forum statistics

Threads
44,168
Posts
950,801
Members
36,285
Latest member
ejulio
Top