Search results

  1. Z

    k5 tail pan replace

    Sorry for the link to a different website, but the article is just what you are looking for. https://ck5.com/forums/resources/phase-one-of-new-floor-install-removal.24/
  2. Z

    Most complete lift kit

    Offroad Design has everything that you listed minus the drive shafts. https://www.offroaddesign.com/1973-1991-custom-spring-lift.html I’d call them up and discuss with them what you want and budget. They love to talk. Otherwise my post would be 2 pages long to address all of your questions.
  3. Z

    Replacement capable Tcase for 1975 K10 passenger side drop

    ^ 205 = Tough, gear driven, pretty heavy, maybe synchronized maybe not 208 = Lighter chain driven, mechanical Speedometer drive, synchronized 241c = 208 with electronic speed sensor….except 1989 is a 1 year only with mechanical speedometer drive 203 = Boat anchor, chain driven, heaviest of...
  4. Z

    Can Semi-Float Rear Axle Handle a Lunchbox Locker or Limited Slip?

    Yup. Will handle a ARB locker spinning 35” tires.
  5. Z

    Mirror quality question

    Slightly off topic, but an acidic wheel cleaner sprayed on the stainless will clean it right up. Don’t leave it on very long, maybe 30 seconds and wipe. All the corrosion will come right off.
  6. Z

    Whitch 3/4 ton axels

    Simple answer - axles from a 3/4 ton truck. Moderate answer - 14 bolt full float with spring perch width that corresponds to your frame width. The front Dana 44 will need converted to 8 lug. Complicated answer - There’s a lot more to it than just bolting in front/rear axle swap. Especially...
  7. Z

    Sun shade/visors

    Here ya go. https://www.heatshieldstore.com/car-window-shades/1984-chevrolet-k10-standard
  8. Z

    Adding 4WD, where does the shifter go?

    700R4 with a NP241. From the firewall to the shift plate From driver side From passenger side
  9. Z

    k5 seat bracket to floor bolts

    3/8 -16 front seat 1/2 -13 rear seat
  10. Z

    What new tools have you got lately?

    ^theres something I didn’t even know existed That I have to own.
  11. Z

    Side molding removal

    I was doing some work at a body shop and saw squarebody trim laid out in the rear yard, getting sun. I got To talking with the owner of the shop and he said to chuck a valve stem in a drill. Takes the old glue residue right off and leave the paint alone.
  12. Z

    Steering box brace kits

    My frame was not cracked, so I just did the inner bolt on bracket from ORD. Huge difference in steering response. as for the weld in frames, there’s a Blazer forum and people did measurements on various weld on frame plates. No difference really other than price. all said generous use of...
  13. Z

    front drive shafts for 4 inch lift

    Get measurements and take the longer shaft to a local shop to have it shortened. It’s easy for a shop to shorten a shaft. https://www.dennysdriveshaft.com/app/webroot/img/File/how_to_measure_diagrams/f.html
  14. Z

    What U-joint for a 12 bolt with np208 and sm465

    You should double check my recommendation, Spicer 5-134X
  15. Z

    Jegs Wiring harness versus Painless Wiring Harness

    I’ve gone down the wiring rabbit hole trying to learn as much as I can. Not all wiring is the same. I’d research the available brands and make your best decision on what you find. https://www.wiringdepot.com/blog/Understanding-the-types-of-Automotive-Wire
  16. Z

    Got Stickers?

  17. Z

    Is Crossover steering worth it?

    That credit should go to the suppliers and FedEx/UPS
  18. Z

    Is Crossover steering worth it?

    Replace the rag joint as well. Stock replacement or a u joint shaft conversion.
  19. Z

    Is Crossover steering worth it?

    This is a post from Stephen Watson owner of Offroad Design. “One thing to check with a factory type steering system is that the swaybar isn't messing with you. If you're running steering correction pieces (like a drop pitman arm) you need disconnects for the swaybar to let it pivot freely and...
  20. Z

    89 K5 floor pan repair?

    Hi guys, back with a few more questions. As I understand i should stop drill the ends of the cracks then weld up the cracks? Would a 10 gauge sheet welded over the area be thick enough to prevent more cracking? These cracks are on the rear outer bucket seat mount. also there is this rubber...
  21. Z

    Kill Switch - once again

    I ended up buying a book from Stacey Davids Gearz. has this page about what you are asking for.
  22. Z

    What size press (12 or 20 ton) for automotive

    $50 difference go for the bigger capacity
  23. Z

    Should I go topless this summer?

    Absolutely! If you can swing it budget wise a softopper is awesome.
  24. Z

    replacement of Autometer gauges

    I have always liked that series of gauge. I find them easy to read at a glance.
  25. Z

    Rear view mirror, where does it go?

    Mine is 5 3/8 from top of window.

Latest posts

Forum statistics

Threads
44,159
Posts
950,613
Members
36,273
Latest member
dannyphx
Top