What have you done to your square lately??

Disclaimer: Links on this page pointing to Amazon, eBay and other sites may include affiliate code. If you click them and make a purchase, we may earn a small commission.

82sbshortbed

82sbshortbed

Fuckemall!!
Joined
Mar 1, 2018
Posts
15,968
Reaction score
53,793
Location
SE Texas
First Name
Doug
Truck Year
1982, 1984
Truck Model
1500 shortbed, 1500 longbed
Engine Size
454, 305
Wha
pinballlarry1 said:
Follow up to my recent post about the headlight on warning buzzer. If anyone has some of the factory wire connectors that plug in to the fuse panel, I would pay for one that fits LPS and IGN if you have some extras. I searched and they seem to be scarce. Pico wiring makes the black for BAT and clear for IGN, but cheapest is at summit racing for $4 each, plus shipping.
You must be registered for see images attach

Other than these, seems that original taps are commanding lots of dollars being "vintage". If some reasonably priced originals can't be had, then my push in blades will have to do.
You must be registered for see images attach

I sure miss the days at Pick-a-part and Pull Ur Own back in San Diego, nothing like that here in NW Montana,
Click to expand...
What about these?

You must be registered for see images attach
 
Mr Clean

Mr Clean

Super Moderator
Staff member
Super Moderator
Joined
Aug 18, 2010
Posts
10,375
Reaction score
10,461
Location
North East Texas
First Name
Shawn
Truck Year
1982 & 1985
Truck Model
K10 Extra Cab w/ Proper SWB, & 85 K5 Blazer
Engine Size
454 BBC, & 383 Stroker
pinballlarry1 said:
Follow up to my recent post about the headlight on warning buzzer. If anyone has some of the factory wire connectors that plug in to the fuse panel, I would pay for one that fits LPS and IGN if you have some extras. I searched and they seem to be scarce. Pico wiring makes the black for BAT and clear for IGN, but cheapest is at summit racing for $4 each, plus shipping.
You must be registered for see images attach

Other than these, seems that original taps are commanding lots of dollars being "vintage". If some reasonably priced originals can't be had, then my push in blades will have to do.
You must be registered for see images attach

I sure miss the days at Pick-a-part and Pull Ur Own back in San Diego, nothing like that here in NW Montana,
Click to expand...
What part of San Diego?
 
Bextreme04

Bextreme04

Full Access Member
Joined
May 13, 2019
Posts
4,464
Reaction score
5,630
Location
Oregon
First Name
Eric
Truck Year
1980
Truck Model
K25
Engine Size
350-4bbl
pinballlarry1 said:
Follow up to my recent post about the headlight on warning buzzer. If anyone has some of the factory wire connectors that plug in to the fuse panel, I would pay for one that fits LPS and IGN if you have some extras. I searched and they seem to be scarce. Pico wiring makes the black for BAT and clear for IGN, but cheapest is at summit racing for $4 each, plus shipping.
You must be registered for see images attach

Other than these, seems that original taps are commanding lots of dollars being "vintage". If some reasonably priced originals can't be had, then my push in blades will have to do.
You must be registered for see images attach

I sure miss the days at Pick-a-part and Pull Ur Own back in San Diego, nothing like that here in NW Montana,
Click to expand...
Speedway an Amazon both sell them as well.
$1.99 each at speedway. https://www.speedwaymotors.com/Pico...fw5jqPCLa44LcLnMIHi2S4XJyEltIsiUaAkv2EALw_wcB
Not sure what they charge for shipping.

Amazon wants $7.55/ea, but free shipping if you are a prime member. https://www.amazon.com/dp/B00030CPSM/
 
Truck82

Truck82

Full Access Member
Joined
Nov 2, 2024
Posts
211
Reaction score
416
Location
Alderton
First Name
Christopher
Truck Year
1982
Truck Model
c20
Engine Size
350
Chevrolado said:
Started taking apart the dash a little and then looked on the underside...
Quick question; Y'all have a bunch of spaghetti hanging down under your dash too?? :eek:

You must be registered for see images attach


I've got some work ahead of me... Lord, beer me strength. :party52:
Click to expand...
I don’t even know where to start on mine. Any tips?
 
Truck82

Truck82

Full Access Member
Joined
Nov 2, 2024
Posts
211
Reaction score
416
Location
Alderton
First Name
Christopher
Truck Year
1982
Truck Model
c20
Engine Size
350
Finally got my exhaust finished. 24 inch dual glass packs with side exit before the rear wheels. I’m loving it!
 

Attachments

  • IMG_3864.jpeg
    IMG_3864.jpeg
    261.1 KB · Views: 10
  • IMG_3865.jpeg
    IMG_3865.jpeg
    150.6 KB · Views: 12
silverscottsk10

silverscottsk10

Full Access Member
Joined
May 8, 2013
Posts
2,691
Reaction score
1,110
Location
trafalgar indiana
First Name
mike
Truck Year
1985
Truck Model
k10
Engine Size
350
pinballlarry1 said:
Follow up to my recent post about the headlight on warning buzzer. If anyone has some of the factory wire connectors that plug in to the fuse panel, I would pay for one that fits LPS and IGN if you have some extras. I searched and they seem to be scarce. Pico wiring makes the black for BAT and clear for IGN, but cheapest is at summit racing for $4 each, plus shipping.
You must be registered for see images attach

Other than these, seems that original taps are commanding lots of dollars being "vintage". If some reasonably priced originals can't be had, then my push in blades will have to do.
You must be registered for see images attach

I sure miss the days at Pick-a-part and Pull Ur Own back in San Diego, nothing like that here in NW Montana,
Click to expand...
I'm half tempted to buy a 3-d printer just to make stuff like this that's small and probably very simple to render and slice
 
Chevrolado

Chevrolado

Full Access Member
Joined
Dec 13, 2012
Posts
468
Reaction score
327
Location
McKinney, TX
First Name
Dave
Truck Year
1977/2006
Truck Model
K10/1500
Engine Size
350
Truck82 said:
I don’t even know where to start on mine. Any tips?
Click to expand...
I started at the OE wiring harness coming through the firewall and the fuse box. From there I started looking at what new wires have been spliced in and tracking where they went.
I’ve figured out that I have three additional things added that I can separate and re-wire more cleanly with wrap and ties. Aftermarket trans temp gauge, aftermarket Kenwood cassette radio, and a modified Tank selector switch.
I pulled the head unit to isolate those wires, going to pull the tank switch as I want to get it back to original equipment eventually, and removed the wiring for the trans gauge too since I’ll likely add new gauges somewhere else and don’t need this gauge in the cluster.

Now I will rewrap up the OE harness, reinstall the cluster without the trans temp gauge, then reinstall the head unit with cleaned up wiring. Then I’ll figure out the tank selector later.
 
Goldie Driver

Goldie Driver

Full Access Member
Joined
Mar 19, 2018
Posts
4,054
Reaction score
6,685
Location
Houston, Texas
First Name
Britt
Truck Year
1980
Truck Model
GMC K1500 Suburban
Engine Size
350
Anyone know where I can get a front shock mount?

No idea how this happened although yesterday 1 bump felt really crazy.:nono:

Left front.
 

Attachments

  • 20241215_161207.jpg
    20241215_161207.jpg
    114.9 KB · Views: 16
  • 20241215_161219.jpg
    20241215_161219.jpg
    99.4 KB · Views: 15
  • 20241215_161245.jpg
    20241215_161245.jpg
    88 KB · Views: 14
You must log in or register to reply here.

Similar threads

Strick
What I have done to my Square lately…
Replies
1
Views
362
Strick
Strick
R
Have you checked your ground?
Replies
1
Views
430
Keith Seymore
Keith Seymore
T
Can't decide what to do. Suggestions? Thoughts?
2 3
Replies
33
Views
2K
Truck82
Truck82
S
Oops. Probably shouldn't have done that.
Replies
11
Views
2K
dsteelejr
dsteelejr
Randy and Easton
  • Sticky
Easton Is Graduating Thank You all for your help GMSB!!
2 3
Replies
31
Views
4K
Randy and Easton
Randy and Easton

Latest posts

Forum statistics

Threads
44,418
Posts
957,180
Members
36,758
Latest member
PapaD
Top