Trans braces not installed when motor went in, can I fix with a little welding/fab work?

Disclaimer: Links on this page pointing to Amazon, eBay and other sites may include affiliate code. If you click them and make a purchase, we may earn a small commission.

S

Spider

Junior Member
Joined
Nov 24, 2024
Posts
5
Reaction score
3
Location
Montana
First Name
Craig
Truck Year
1990
Truck Model
gmc v2500 sub
Engine Size
5.7 tbi
So the trans to motor mount k braces were not installed when everything went in. I’m thinking of making a bracket that bolts onto the motor mount to fix it after the fact. Don’t want to delete them. And at this point I don’t want to pull the motor out
You must be registered for see images attach
You must be registered for see images attach
You must be registered for see images attach
You must be registered for see images attach


Also not sure where these go.
You must be registered for see images attach
 
Last edited:
SquareRoot

SquareRoot

Full Access Member
Joined
Mar 18, 2017
Posts
4,230
Reaction score
8,123
Location
Arizona
First Name
Mike
Truck Year
85
Truck Model
K20
Engine Size
350
It would be easier to unbolt the mount, slip them in and do it the way it was intended. You don't have to take the engine out. Those short one look similar to the braces I had on my Th400 inspection plate cover? It was cast aluminum, not stamped steel.
 
nvrenuf

nvrenuf

Full Access Member
Joined
Jul 30, 2010
Posts
1,981
Reaction score
2,522
Location
Mobile, Al.
First Name
John
Truck Year
1991
Truck Model
K5
Engine Size
454
Jack the motor up and slip the brackets in like they are supposed to be.

Those short bars look like a/c compressor braces, there might be one on the alternator of some serpentine belt systems too.
 
S

Spider

Junior Member
Joined
Nov 24, 2024
Posts
5
Reaction score
3
Location
Montana
First Name
Craig
Truck Year
1990
Truck Model
gmc v2500 sub
Engine Size
5.7 tbi
Upon further review, we are pulling the motor mounts and installing correctly.

Still don’t know what the small braces are for. Was thinking alternator but they don’t work there.
 
C

CalSgt

Full Access Member
Joined
Oct 3, 2021
Posts
1,732
Reaction score
3,904
Location
CA
First Name
Casey
Truck Year
1980
Truck Model
Chevy K-10 Custom Deluxe
Engine Size
350
Spider said:
Upon further review, we are pulling the motor mounts and installing correctly.

Still don’t know what the small braces are for. Was thinking alternator but they don’t work there.
Click to expand...
Good choice...

@SquareRoot and @nvrenuf give solid advice
 
fast 99

fast 99

Full Access Member
Joined
Dec 31, 2021
Posts
2,090
Reaction score
3,065
Location
Spokane, Washington
First Name
Brian
Truck Year
81,85
Truck Model
K20
Engine Size
350
Short ones appear to be rear ac bracket or alt as someone else pointed out. They should go to intake studded bolts.
 
S

Spider

Junior Member
Joined
Nov 24, 2024
Posts
5
Reaction score
3
Location
Montana
First Name
Craig
Truck Year
1990
Truck Model
gmc v2500 sub
Engine Size
5.7 tbi
I’m thinking ac brackets. Although I found some holes on the alternator side, but these don’t match up.
 
You must log in or register to reply here.

Similar threads

S
Trans braces not installed when motor went in, can I fix with a little welding/fab work?
Replies
4
Views
207
fast 99
fast 99
B
SBC 350 motor mounts orientation?
Replies
2
Views
2K
bucket
bucket
S
after doin front end clutch and steering column,truck feels like its in 4wd
Replies
10
Views
980
Grit dog
Grit dog
C
"Sagging Motor Mounts"
Replies
3
Views
1K
Ricko1966
R
NickTransmissions
4L80E Information Thread
Replies
14
Views
5K
MrMarty51
MrMarty51

Latest posts

Forum statistics

Threads
44,414
Posts
956,948
Members
36,734
Latest member
wjh1175
Top