350turbo out 700r4 in expected cost?

Disclaimer: Links on this page pointing to Amazon, eBay and other sites may include affiliate code. If you click them and make a purchase, we may earn a small commission.

tartarsauce

Junior Member
Joined
Dec 10, 2024
Posts
1
Reaction score
0
Location
West Cornwall
First Name
Paul
Truck Year
1985
Truck Model
k10
Engine Size
5.7L 350
Really excited about my new truck; I'm having the 350 turbo transmission taken out and swapped for a good 700r4 to have behind a 350 motor. I'm providing the new transmission, doesn't need to be rebuilt or anything just a straight swap. Any ideas for what I should expect it to cost?
 

Vbb199

B-rate Hillbilly Customs
Joined
Jan 12, 2018
Posts
9,108
Reaction score
15,456
Location
Salisbury NC
First Name
Vince
Truck Year
89, 79
Truck Model
89 Suburban R1500, 79 C10
Engine Size
350, 502
No ideas on shop labor rates - ive never paid a mechanic

However , a solid piece of advice for you is to MAKE SURE the swap-shop puts the correct bracketry on the throttle body/carb for the TV cable coming from the 700r4 and that its TIGHT or set by line pressure with a gauge.

That trans wont last 3 miles without it, unless its a aftermarket constant line pressure Valve body
 

Matt69olds

Full Access Member
Joined
Jan 8, 2018
Posts
2,485
Reaction score
3,890
Location
Central Indiana
First Name
Matt
Truck Year
81
Truck Model
GMC 1/2 ton
Engine Size
455 Olds
What he said!! ^^^^


Too many people think as long as the tv cable is tight at WOT, then all is good. While that is partially true, it’s the other 95% of the throttle opening that will cause damage. If the cable is too lose at part throttle, then you will get mushy slip/slide type shifts. It only takes a couple shifts like that before the band/clutches are glazed, then it’s all downhill.
 

NickTransmissions

Supporting Member
Supporting Member
Joined
Aug 3, 2023
Posts
444
Reaction score
893
Location
Las Vegas
First Name
Nick
Truck Year
1987
Truck Model
R10
Engine Size
350
Really excited about my new truck; I'm having the 350 turbo transmission taken out and swapped for a good 700r4 to have behind a 350 motor. I'm providing the new transmission, doesn't need to be rebuilt or anything just a straight swap. Any ideas for what I should expect it to cost?
2WD or 4X4? Also, are you doing the physical swap or outsourcing it? Figure $150-300 for a cut/balance of the driveline by a driveshaft shop (or a new driveshaft) and perhaps some work to move the X member back. There's also companies that make custom cross members for such swaps.

Here's TV cable instructions if you're doing the install yourself.
 

Latest posts

Forum statistics

Threads
44,414
Posts
956,958
Members
36,736
Latest member
bartram89
Top