3.08 Gears. What to Swap to?

Disclaimer: Links on this page pointing to Amazon, eBay and other sites may include affiliate code. If you click them and make a purchase, we may earn a small commission.

Normmus

Normmus

Full Access Member
Joined
Dec 20, 2022
Posts
58
Reaction score
151
Location
Saskatchewan
First Name
Norm
Truck Year
1977
Truck Model
K10
Engine Size
350
Truck is a 1977 K10 with a stock 350, SM465, 31 inch tires, and 3.08 gears. It sees about 70% highway, 20% in town driving, and 10% low speed yard driving (some deep snow, small hills). No towing at all. I am satisfied with the highway performance, but it feels like it needs deeper gears around town but I can live with it. I want to go up to a 33 inch tire and lift it a bit. I know I will need to regear to be satisfied but for new gears I am having a hard time deciding between 3.73 and 4.11. Wondering if anyone has the same drivetrain as my truck and done a swap to 3.73 or 4.11 and what you liked/didn't like about it.

Edited to add - I do not want to swap a different transmission in.
 
R

Ricko1966

Full Access Member
Joined
Apr 11, 2017
Posts
5,636
Reaction score
9,240
Location
kansas
First Name
Rick
Truck Year
1975
Truck Model
c20
Engine Size
350
Normmus said:
Truck is a 1977 K10 with a stock 350, SM465, 31 inch tires, and 3.08 gears. It sees about 70% highway, 20% in town driving, and 10% low speed yard driving (some deep snow, small hills). No towing at all. I am satisfied with the highway performance, but it feels like it needs deeper gears around town but I can live with it. I want to go up to a 33 inch tire and lift it a bit. I know I will need to regear to be satisfied but for new gears I am having a hard time deciding between 3.73 and 4.11. Wondering if anyone has the same drivetrain as my truck and done a swap to 3.73 or 4.11 and what you liked/didn't like about it.

Edited to add - I do not want to swap a different transmission in.
Click to expand...
Get a tach,drive your truck,note your rpms at different speeds. Then look at an online gear ratio calculator,see how many rpms you will be turning at the speeds you commonly drive at. Go drive your truck at those rpms. Are you comfortable at those rpms? Problem solved.
 
Last edited:
Redfish

Redfish

Full Access Member
Joined
Nov 6, 2021
Posts
2,745
Reaction score
14,746
Location
Prairieville, LA
First Name
Andrew
Truck Year
1987
Truck Model
V1500
Engine Size
350/5.7
My '87 has the stock TBI 350, SM465, 3:42 gears and 33 inch tires. My motor has a few more horsepower than yours so this isn't apples to apples...

I don't have a tach so I cannot give specifics here but for all around town, backroads, 55 mph two lane highways, my gearing is okay. It still pulls like a tractor in 4 Low and as you know the "L" gear on that SM465 is pretty low. I use this pretty frequently. I have not wished for anything lower or higher, but this truck is not my daily driver either.

Based on your usage I would say 3:73. I think 4:11s on the highway would be annoying with 33 inch tires.

My Truck:

You must be registered for see images attach
 
legopnuematic

legopnuematic

Licensed Junk Dealer
Supporting Member
Joined
Oct 27, 2016
Posts
2,637
Reaction score
6,995
Location
MO
First Name
Spencer
Truck Year
1971, 1̶9̶7̶4, 1976, 1979,1̶9̶8̶5, 2002
Truck Model
Dart Swinger, Sierra 10, C10 Cheyenne, C10 Big Ten, Silverado 10, Ram 2500
Engine Size
225/6, 350 c.i., 350 c.i., 5.9l Cummins
3.42-3.73 I think would be satisfactory for your usage.

With the 6.55:1 first (or low) of the sm465 and if that’s not enough you have low range with the transfer case to get something moving.
 
newguy11

newguy11

Full Access Member
Joined
Aug 24, 2021
Posts
94
Reaction score
193
Location
New England
First Name
Private
Truck Year
1972-1987
Truck Model
C/k 10
Engine Size
305/350
If any of you guys want I built rear gear / rpm calculator on Microsoft excel.
Send me a private message with your email and I’ll send it to you.

It’s set up to compare different rear gears combos with either the TH350 or 700r4.
You could add different trans if you had the inclination
 
MikeB

MikeB

Full Access Member
Joined
Apr 4, 2014
Posts
1,782
Reaction score
1,020
Location
North Texas
First Name
Mike
Truck Year
1969
Truck Model
C10
Engine Size
355
Last edited:
  • Like
Reactions: WFO
straydog371

straydog371

Junior Member
Joined
Jun 6, 2023
Posts
29
Reaction score
98
Location
WNY
First Name
Kerry
Truck Year
1978
Truck Model
K10
Engine Size
350
Normmus said:
Truck is a 1977 K10 with a stock 350, SM465, 31 inch tires, and 3.08 gears. It sees about 70% highway, 20% in town driving, and 10% low speed yard driving (some deep snow, small hills). No towing at all. I am satisfied with the highway performance, but it feels like it needs deeper gears around town but I can live with it. I want to go up to a 33 inch tire and lift it a bit. I know I will need to regear to be satisfied but for new gears I am having a hard time deciding between 3.73 and 4.11. Wondering if anyone has the same drivetrain as my truck and done a swap to 3.73 or 4.11 and what you liked/didn't like about it.

Edited to add - I do not want to swap a different transmission in.
Click to expand...
My drivetrain is pretty much the same as yours: 1978 K10 with the original SBC 350, SM465, 32 inch tires, and 3.08 gears. I installed a tach last winter...at 60 mph I'm seeing 1950 RPM.
I just used the calculator that Mike B linked above. and it shows 1940 RPM with my setup...close enough to verify my tach is pretty accurate.
I'll also be re-gearing and was "undecided" until this conversation was started. 3.73 ratio sounds like the winner for me too...60mph / 2349 RPM. I can live with that.
Plan to rebuild both axles over the winter...I'll definitely be asking questions and posting pictures along the way.
 
J

JBswth

Full Access Member
Joined
Jan 24, 2022
Posts
238
Reaction score
195
Location
Vallejo, California
First Name
James
Truck Year
1973
Truck Model
C25
Engine Size
292 cubic inches
Normmus said:
Truck is a 1977 K10 with a stock 350, SM465, 31 inch tires, and 3.08 gears. It sees about 70% highway, 20% in town driving, and 10% low speed yard driving (some deep snow, small hills). No towing at all. I am satisfied with the highway performance, but it feels like it needs deeper gears around town but I can live with it. I want to go up to a 33 inch tire and lift it a bit. I know I will need to regear to be satisfied but for new gears I am having a hard time deciding between 3.73 and 4.11. Wondering if anyone has the same drivetrain as my truck and done a swap to 3.73 or 4.11 and what you liked/didn't like about it.

Edited to add - I do not want to swap a different transmission in.
Click to expand...
I wouldn't go deeper than 3:73 with automatic.

J. B.
 
You must log in or register to reply here.

Similar threads

M
Looking to swap a 1979 Bonanza to an Automatic Overdrive
Replies
6
Views
494
midgetorama
M
J
Are my gears to high for the setup?
Replies
6
Views
608
Shorty81
Shorty81
T
Can't decide what to do. Suggestions? Thoughts?
2 3
Replies
33
Views
2K
Truck82
Truck82
broke78
What I need to know before LS1 swap K10
Replies
4
Views
2K
hoagster
hoagster
BigT
New to the forum, but not to Squarebodies...
2 3
Replies
30
Views
2K
CapAhab
C

Latest posts

Forum statistics

Threads
44,464
Posts
958,491
Members
36,855
Latest member
Kmcorrea43
Top