gas tank wont fill all the way

Disclaimer: Links on this page pointing to Amazon, eBay and other sites may include affiliate code. If you click them and make a purchase, we may earn a small commission.

mjck5

Junior Member
Joined
Mar 16, 2024
Posts
23
Reaction score
14
Location
wisconsin
First Name
mark
Truck Year
1986 k5 blazer
Truck Model
k5
Engine Size
400
i have a 86 k5, years ago when it was my daily driver i never had issues filling up the tank, now its back on the road after several years and when i fill it up it will only fill up about 3/4 of the tank before the nozzle shuts off, if i have the gas filling at full blast it will shut off a little after a half tank, i can hear it gurgling and if i wait a little bit i can get more gas in if i just barely pull the trigger then it will fill all the way to the gas cap and when i stop i can hear it gurgling again and it will slowly go down, if i do this over and over i can get it pretty much full but it takes forever, i pulled the rubber line off the vent line and as far as i can tell it doesn't seem to be plugged, anyone have any ideas what the issue may be?
 

Attachments

  • blazerpic.jpg
    blazerpic.jpg
    233.8 KB · Views: 7

Grit dog

Full Access Member
Joined
May 18, 2020
Posts
6,966
Reaction score
12,215
Location
Auburn, Washington
First Name
Todd
Truck Year
1986, 1977
Truck Model
K20, C10
Engine Size
454, 350
Depends on the pump nozzle type. I despise the newer vapor recovery styles. But all you can get up here. Some of them make such a good seal I can only get a couple gallons in before it spits back. Have to wedge it at an angle to fill.
If this is happening with an old school pump nozzle then I’d be thinking collapsed or linked filler hose or ???
Because shouldn’t need the tank vent if the nozzle isn’t sealing tight to the fuel filler.
God bless the Midwest. Was back there a week ago. Most every pump (I filled up 4-5x in different locations) was a good ole “farm nozzle”.
 

fast 99

Full Access Member
Joined
Dec 31, 2021
Posts
2,026
Reaction score
2,928
Location
Spokane, Washington
First Name
Brian
Truck Year
81,85
Truck Model
K20
Engine Size
350
Depends on the pump nozzle type. I despise the newer vapor recovery styles. But all you can get up here. Some of them make such a good seal I can only get a couple gallons in before it spits back. Have to wedge it at an angle to fill.
If this is happening with an old school pump nozzle then I’d be thinking collapsed or linked filler hose or ???
Because shouldn’t need the tank vent if the nozzle isn’t sealing tight to the fuel filler.
God bless the Midwest. Was back there a week ago. Most every pump (I filled up 4-5x in different locations) was a good ole “farm nozzle”.
And then there are those new style self-sealing fuel cans. What overpaid engineer came up with those? Hopefully some of this idiocy will be curbed soon.
 

CalSgt

Full Access Member
Joined
Oct 3, 2021
Posts
1,699
Reaction score
3,759
Location
CA
First Name
Casey
Truck Year
1980
Truck Model
Chevy K-10 Custom Deluxe
Engine Size
350
i have a 86 k5, years ago when it was my daily driver i never had issues filling up the tank, now its back on the road after several years and when i fill it up it will only fill up about 3/4 of the tank before the nozzle shuts off, if i have the gas filling at full blast it will shut off a little after a half tank, i can hear it gurgling and if i wait a little bit i can get more gas in if i just barely pull the trigger then it will fill all the way to the gas cap and when i stop i can hear it gurgling again and it will slowly go down, if i do this over and over i can get it pretty much full but it takes forever, i pulled the rubber line off the vent line and as far as i can tell it doesn't seem to be plugged, anyone have any ideas what the issue may be?
Some of the K5’s that used to come through when I worked at a full service gas station we would have to insert the nozzle upside down for them to take fuel
 
  • Like
Reactions: WFO

Grit dog

Full Access Member
Joined
May 18, 2020
Posts
6,966
Reaction score
12,215
Location
Auburn, Washington
First Name
Todd
Truck Year
1986, 1977
Truck Model
K20, C10
Engine Size
454, 350
And then there are those new style self-sealing fuel cans. What overpaid engineer came up with those? Hopefully some of this idiocy will be curbed soon.
Engineer is not to blame. Govt is.
They’re literally unsafe, in more ways than one, which is the ironic part.
 

WFO

Full Access Member
Joined
Jan 6, 2017
Posts
3,688
Reaction score
5,028
Location
Texas Panhandle
First Name
Dan
Truck Year
1986
Truck Model
K20
Engine Size
350
Some of the K5’s that used to come through when I worked at a full service gas station we would have to insert the nozzle upside down for them to take fuel
I have to turn the nozzle sideways on my 86 K20 when it gets almost full.
But, it has the larger opening for leaded gas.
 

Latest posts

Forum statistics

Threads
44,149
Posts
950,362
Members
36,260
Latest member
Delirius63
Top