Storage tray
- Thread starter jagbuxx
- Start date
Disclaimer: Links on this page pointing to Amazon, eBay and other sites may include affiliate code. If you click them and make a purchase, we may earn a small commission.
Ehodg82
Junior Member
- Joined
- Jan 20, 2020
- Posts
- 3
- Reaction score
- 5
- Location
- fort lauderdale
- First Name
- ERic
- Truck Year
- 1982
- Truck Model
- c10
- Engine Size
- 350
I didn't receive any messages but here are the measurements and another pic of my setup.
A couple things:
I cut the middle shelf to allow me to carry coolant, oil and tranny fluid. I was going to support the shelf but it's rigid enough that i didn't need to do that. I also added netting to keep things from flying out but enables me to reach through and grab what i need. I'll supply the link where i purchased the netting if someone asks for it.
A couple things:
I cut the middle shelf to allow me to carry coolant, oil and tranny fluid. I was going to support the shelf but it's rigid enough that i didn't need to do that. I also added netting to keep things from flying out but enables me to reach through and grab what i need. I'll supply the link where i purchased the netting if someone asks for it.
Attachments
84GMCSierra
Full Access Member
- Joined
- Feb 26, 2023
- Posts
- 363
- Reaction score
- 432
- Location
- Central Arizona
- First Name
- Paul
- Truck Year
- 1984
- Truck Model
- C2500
- Engine Size
- 350
Courtesy of ehodg82, here are the tray measurements/ drawings. I'm going to have one made for my truck.
Attachments
Similar threads
