17-in rims

Disclaimer: Links on this page pointing to Amazon, eBay and other sites may include affiliate code. If you click them and make a purchase, we may earn a small commission.

F

fnny6770

Member
Joined
May 11, 2024
Posts
49
Reaction score
28
Location
Pocatello
First Name
Paul
Truck Year
1980
Truck Model
3500 camper special
Engine Size
454
My 1980 GMC k 30 dual wheel truck came with 16-in rims from the factory, tires for this 16 in are getting harder to find so I thought of upgrading to the 17 in, the problem is GMC went to metrics and finding a set of dual wheels that will fit that can be a challenge but I found that Dodge did not go to metrics on their bolt hole spacings until about 2018 so I found a set of 17 inch rims off of 2010 Dodge 1 ton dually, the bolt patterns are the same as 1980 but the center hole is a little larger so my only concern is will these rims center themselves on the hubs when I bolt them down or do I have to do something different? I appreciate all your help and advice!
 

Attachments

  • Screenshot_20240511_201717_Photos.jpg
    Screenshot_20240511_201717_Photos.jpg
    86 KB · Views: 59
legopnuematic

legopnuematic

Licensed Junk Dealer
Supporting Member
Joined
Oct 27, 2016
Posts
2,506
Reaction score
6,482
Location
MO
First Name
Spencer
Truck Year
1971, 1̶9̶7̶4, 1976, 1979,1̶9̶8̶5, 2002
Truck Model
Dart Swinger, Sierra 10, C10 Cheyenne, C10 Big Ten, Silverado 10, Ram 2500
Engine Size
225/6, 350 c.i., 350 c.i., 5.9l Cummins
What do the lug nuts look like currently? Most DRW I know of are hub centric. If they are [lugnuts] flat with a swaged washer then those should be Hub not lug centric (since there is not conical feature for locating)

Dodge hub center bores are about 1/4” larger diameter than the GM’s are. You can likely source hub centric adapters if you go that route. Run at your discretion.
 
fast 99

fast 99

Full Access Member
Joined
Dec 31, 2021
Posts
2,029
Reaction score
2,932
Location
Spokane, Washington
First Name
Brian
Truck Year
81,85
Truck Model
K20
Engine Size
350
75gmck25 said:
AFAIK, squarebody wheels are lug centric, not hub centric ( like many newer vehicles).
Click to expand...
That may not be true.

Had a customer with a concrete cutting business [heavy for a 1 ton]. He liked shinny stuff and installed Alcoa wheels. Then the trucks started shearing off rear studs. A couple times driving in the city both wheels came off one side, trucked dropped with expected damage. We fixed it twice with GM parts then dove deep into what was going on. Turned out the Alcoa wheels were not hub centric putting all the load on the studs. After replacing wheels with original hub centric style never broke another stud. These trucks were likely overloaded never weighed one. Just food for thought.
 
R

Ricko1966

Full Access Member
Joined
Apr 11, 2017
Posts
5,446
Reaction score
8,682
Location
kansas
First Name
Rick
Truck Year
1975
Truck Model
c20
Engine Size
350
That's what hubcentric does,displaces the shear load from the studs and puts it on the hub. I'd want something hubcentric. When you hit a bump all the upward shock force is all on the little 1/2 studs instead of shared with a 4 inch diameter hub.
 
fast 99

fast 99

Full Access Member
Joined
Dec 31, 2021
Posts
2,029
Reaction score
2,932
Location
Spokane, Washington
First Name
Brian
Truck Year
81,85
Truck Model
K20
Engine Size
350
Ricko1966 said:
That's what hubcentric does,displaces the shear load from the studs and puts it on the hub. I'd want something hubcentric. When you hit a bump all the upward shock force is all on the little 1/2 studs instead of shared with a 4 inch diameter hub.
Click to expand...
Yeah that's what we figured out. Those Alcoa wheels had a larger center that fit other brands. Should have realized what was going on after the first fail. In addition the inside wheels were stock steel. Aluminum wheels flex more increasing the side load.
 
Fat 454

Fat 454

Full Access Member
Joined
Jul 24, 2012
Posts
107
Reaction score
184
Location
Australia
First Name
Andy
Truck Year
1973
Truck Model
C20 Suburban
Engine Size
454
Maybe you can get a local machine shop to make up some hub centre adapters for the wheels ? We have a local shop that is happy to make up all sorts of weird stuff. just make sure they use the right grade of steel ( nothing too soft )..
 
O

otex255

Junior Member
Joined
Jul 16, 2023
Posts
3
Reaction score
2
Location
Idaho
First Name
Paul
Truck Year
1980
Truck Model
K3500
Engine Size
454
Thank you for your replies, a lot of good information. They make hub centering rings all the way up to full size adapters, some of these rings are made out of the tea grade aluminum some out of polycarbonate.
 

Attachments

  • Screenshot_20240529_052403_Chrome.jpg
    Screenshot_20240529_052403_Chrome.jpg
    87.6 KB · Views: 39
O

otex255

Junior Member
Joined
Jul 16, 2023
Posts
3
Reaction score
2
Location
Idaho
First Name
Paul
Truck Year
1980
Truck Model
K3500
Engine Size
454
There are several websites that have wheel hub adapters, Amazon has several different sizes I was able to find one that fits the hub of my 1980 GMC and will allow centering the 17 inch rims so that the weight rests on the hub perfectly and not the nuts or the studs
 

Attachments

  • Screenshot_20240530_163631_Chrome.jpg
    Screenshot_20240530_163631_Chrome.jpg
    72.9 KB · Views: 31
F

fnny6770

Member
Joined
May 11, 2024
Posts
49
Reaction score
28
Location
Pocatello
First Name
Paul
Truck Year
1980
Truck Model
3500 camper special
Engine Size
454
Update, I bought a set of hubcentric rings for my 1980 GMC dually to mount 17 inch wheels from a 2010 Ram 3500, so far so good
 

Attachments

  • 20241030_125032.jpg
    20241030_125032.jpg
    304.1 KB · Views: 15
  • 20241030_125039.jpg
    20241030_125039.jpg
    241.1 KB · Views: 13
  • 20241030_125934.jpg
    20241030_125934.jpg
    213.4 KB · Views: 16
bucket

bucket

Super Moderator
Staff member
Super Moderator
Joined
Aug 3, 2010
Posts
30,439
Reaction score
28,345
Location
Usually not in Ohio
First Name
Andy
Truck Year
'77, '78, '79, '84, '88
Truck Model
K5 thru K30
Engine Size
350-454
fnny6770 said:
Update, I bought a set of hubcentric rings for my 1980 GMC dually to mount 17 inch wheels from a 2010 Ram 3500, so far so good
Click to expand...

Where did you buy those rings?
 
F

fnny6770

Member
Joined
May 11, 2024
Posts
49
Reaction score
28
Location
Pocatello
First Name
Paul
Truck Year
1980
Truck Model
3500 camper special
Engine Size
454
I bought those rings off of Amazon, they have many different sizes made out of different materials.
 

Attachments

  • Screenshot_20241102_182424_Chrome.jpg
    Screenshot_20241102_182424_Chrome.jpg
    83.8 KB · Views: 14
F

fnny6770

Member
Joined
May 11, 2024
Posts
49
Reaction score
28
Location
Pocatello
First Name
Paul
Truck Year
1980
Truck Model
3500 camper special
Engine Size
454
On a side note they fit snug inside the rim, the outside diameter 121.3, mm but they fit a little loose on the hub, 116.7 mm inside diameter. When I measure the hub diameter of the original rims it measures out 115.7 mm, maybe this small difference won't matter?
 
You must log in or register to reply here.

Similar threads

H
How to ID 16" 8 bolt wheels?
2
Replies
24
Views
1K
AuroraGirl
AuroraGirl
DoubleDingo
Waffling
2
Replies
23
Views
1K
bucket
bucket
O
18 inch rims for 1980 K3500 dually
Replies
1
Views
1K
HotWheelsBurban
H
Coldercorgi6637
Tires for 16in rims
Replies
2
Views
876
Rusty Nail
Rusty Nail
ChuckN
Turbine wheels in 5x5?
Replies
5
Views
570
ChuckN
ChuckN

Latest posts

Forum statistics

Threads
44,160
Posts
950,626
Members
36,273
Latest member
dannyphx
Top