Distributor will hit edelbrock 3764 intake

Disclaimer: Links on this page pointing to Amazon, eBay and other sites may include affiliate code. If you click them and make a purchase, we may earn a small commission.

Sgt Gus

Sgt Gus

Full Access Member
Joined
Aug 2, 2023
Posts
260
Reaction score
388
Location
Texas
First Name
Mark
Truck Year
87
Truck Model
R20 3/4 ton
Engine Size
454ci/7.4L
I got it. Sat and played with old distributor. So I'll just loosen the distributor and rotate it counter clockwise and make the next post my #1.
This way my rotor stays pointed at piston 1 and I have room to play with timing.
Gold star?
 
bucket

bucket

Super Moderator
Staff member
Super Moderator
Joined
Aug 3, 2010
Posts
30,446
Reaction score
28,356
Location
Usually not in Ohio
First Name
Andy
Truck Year
'77, '78, '79, '84, '88
Truck Model
K5 thru K30
Engine Size
350-454
Sgt Gus said:
I got it. Sat and played with old distributor. So I'll just loosen the distributor and rotate it counter clockwise and make the next post my #1.
This way my rotor stays pointed at piston 1 and I have room to play with timing.
Gold star?
Click to expand...

I'm not sure about a gold start, but you at least get an A for effort, lol.
 
Sgt Gus

Sgt Gus

Full Access Member
Joined
Aug 2, 2023
Posts
260
Reaction score
388
Location
Texas
First Name
Mark
Truck Year
87
Truck Model
R20 3/4 ton
Engine Size
454ci/7.4L
bucket said:
I'm not sure about a gold start, but you at least get an A for effort, lol.
Click to expand...
True, you guys get the gold star for helping the inexperienced. I appreciate everyone pitching in. It's these simple things that I can take for granted.
Check out our "Betty Blue" build page.
Father daughter build. Hopefully running before end of year. We install Saturday.
 
75gmck25

75gmck25

Full Access Member
Joined
Oct 13, 2016
Posts
2,268
Reaction score
2,210
Location
Northern Virginia
First Name
Bruce
Truck Year
1975
Truck Model
K25 Camper Special TH350 NP203
Engine Size
5.7
Also, when you "move" the #1 cylinder on the cap, the firing order is still the same, so all the other wires on the cap have to move the same number of places on the cap. The cap is indexed to the metal rim of the distributor so that it only reinstalls in one orientation.
 
tsgs84

tsgs84

Junior Member
Joined
Jun 8, 2022
Posts
26
Reaction score
21
Location
md
First Name
Timothy
Truck Year
84
Truck Model
K10
Engine Size
350
bucket said:
On a Chevy V8, you can orientate the dizzy wherever you want AND have the #1 post be wherever you want. Just set the engine to TDC and drop the thing in wherever you want, but making sure the rotor is where you want it to be as well. The only tricky part is turning the oil pump drive shaft to match where you want the rotor to be pointing.
Click to expand...
Bucket has it right, you can
move or set the distributor in any position you want as long as where you drop it in the rotor aligns with the designated #1 on the cap and the engine is on TDC
 
You must log in or register to reply here.

Similar threads

R
Edelbrock Carbureators,and Chinese Distribuors etc.etc.
Replies
5
Views
1K
1STLS1
1
t44e6
Got a cast iron point type distributor to rebuild, questions.
Replies
2
Views
320
Ricko1966
R
D
Intake Manifold surface
Replies
3
Views
347
dauntlessoul
D
BurbanPena
edelbrock avs2 650
2 3
Replies
32
Views
3K
82sbshortbed
82sbshortbed
68dhayes
Building a new motor for my 79 C10 - would love some advice!
Replies
14
Views
1K
75BEASTK20
75BEASTK20

Latest posts

Forum statistics

Threads
44,175
Posts
950,924
Members
36,295
Latest member
shamou
Top