Bondo roof. What to do?

Disclaimer: Links on this page pointing to Amazon, eBay and other sites may include affiliate code. If you click them and make a purchase, we may earn a small commission.

jimmy78

Full Access Member
Joined
Jan 21, 2024
Posts
55
Reaction score
46
Location
bc
First Name
matt
Truck Year
1978
Truck Model
jimmy
Engine Size
5.7l
1978 gmc jimmy lowered. Now I can see the roof in all its unfortunate things.

Looks like someone stood on the roof and then filled it with bondo. How would you repair this?

New panel? Can’t seem to locate a jimmy or blazer specific roof panel only c10 pickup roof panels.

Pull the dents and repair the dents? Never done that stuff before so no idea where to start.
 

Attachments

  • IMG_0372.jpeg
    IMG_0372.jpeg
    113.4 KB · Views: 27

waterpirate

Full Access Member
Joined
Jan 2, 2019
Posts
929
Reaction score
2,228
Location
delaware
First Name
Eric
Truck Year
1987
Truck Model
v10
Engine Size
5.7 tbi
That mess could be cleaned up with some basic power tools and a straight edge. Grinder and some sanders. A peek under the headliner would give you a better idea what is going on with it without committing to the repair,
Eric
 

ali_c20

Full Access Member
Joined
Sep 20, 2016
Posts
1,299
Reaction score
1,852
Location
Austria
First Name
Alexander
Truck Year
1974, 1979
Truck Model
C20, K5
Engine Size
350, 350
That mess could be cleaned up with some basic power tools and a straight edge. Grinder and some sanders. A peek under the headliner would give you a better idea what is going on with it without committing to the repair,
Eric
The cab roof consists out of inner and outer roof. Under the headliner you can only see the inner roof.

You must be registered for see images attach
 

TotalyHucked

Full Access Member
Joined
Feb 24, 2020
Posts
3,669
Reaction score
11,847
Location
Auburn, Georgia
First Name
Zach
Truck Year
1985
Truck Model
Sierra 1500
Engine Size
5.3
I think I'd get out a flap disc/one of those paint remover drum things and strip what you have before going any further. Certainly won't make it any worse. You might find it's just a little wavy and some heat/shrinking and a little bodywork could get it back in shape
 

jimmy78

Full Access Member
Joined
Jan 21, 2024
Posts
55
Reaction score
46
Location
bc
First Name
matt
Truck Year
1978
Truck Model
jimmy
Engine Size
5.7l
That mess could be cleaned up with some basic power tools and a straight edge. Grinder and some sanders. A peek under the headliner would give you a better idea what is going on with it without committing to the repair,
Eric
I took a look under the headliner and the inner skin has no problems.
 

Strick

Full Access Member
Joined
Nov 25, 2020
Posts
1,354
Reaction score
3,315
Location
Dunn, NC
First Name
Harold
Truck Year
1979
Truck Model
C20 Crew
Engine Size
350
Lift it and put on some 37's and only folks on the overpass will know... I agree the aforementioned flapper disc and straight edge approach though, really. Once you've established that the roof is not trashed then I'd put the stud gun and pick hammer to work. Body filler and body work will make like it never happened.

HS
 

waterpirate

Full Access Member
Joined
Jan 2, 2019
Posts
929
Reaction score
2,228
Location
delaware
First Name
Eric
Truck Year
1987
Truck Model
v10
Engine Size
5.7 tbi
I took a look under the headliner and the inner skin has no problems.
Awesome! That indicates the damage is not super bad. For the inner skin police, what is the gap between the inner skin and the roof? That would be the limit of the damage if the fore skin, lol, is not impacted. What you have is a mess. Put the grinder on it and see if you can at least true the roof profile of bondo up to normal. If you do not encounter anything scary, the bondo application you have is the result of " hold my beer " I'm a gonna fix it fer ya.
Eric
 

Camar068

Supporting Member
Supporting Member
Joined
Feb 5, 2014
Posts
4,293
Reaction score
3,339
Location
Kentucky
First Name
David
Truck Year
1986
Truck Model
K10/LM7 5.3/4L60e/np208/3.73/32"
Engine Size
10 yrs Air Force
1978 gmc jimmy lowered. Now I can see the roof in all its unfortunate things.

Looks like someone stood on the roof and then filled it with bondo. How would you repair this?

New panel? Can’t seem to locate a jimmy or blazer specific roof panel only c10 pickup roof panels.

Pull the dents and repair the dents? Never done that stuff before so no idea where to start.
depends on how much "character" you want. Mine is an expensive (rust free but not perfect) hunting truck/daily driver, so I'd get rid of the bondo and pop out what I could and hit the road.

Again depends on how perfect you want it and the price to get there. Hell tell 'em some fat chick got jumped by a dead turkey in the bed cuz it wasn't dead lol. Use your imagination lol.
 
Last edited:

jimmy78

Full Access Member
Joined
Jan 21, 2024
Posts
55
Reaction score
46
Location
bc
First Name
matt
Truck Year
1978
Truck Model
jimmy
Engine Size
5.7l
Thanks for the bout of confidence. I put a scope between the 2 layers and there’s nothing to spectacular to see in there so the pop and pull method will be a learning experience for me. Worst case I use less bondo then the previous version.
 
Last edited:

YakkoWarner

Full Access Member
Joined
May 29, 2024
Posts
164
Reaction score
192
Location
Central Texas
First Name
Wolf
Truck Year
1989
Truck Model
R2500 Suburban
Engine Size
454
Thanks for the bout of confidence. I put a scope between the 2 layers and there’s nothing to spectacular to see in there so the pop and pull method will be a learning experience for me. Worst case I use less bondo then the previous version.

Having some Bondo (or other fairing filler compound) is almost inevitable - but getting it as close to straight as possible and then filling/fairing with as little putty/resin as possible is the best way unless you really like doing sheet metal work. I had an MGB where the driver side fender was more of a sculpture than a car part...looked OK at a distance until you looked at the underside and realized there were 2 or maybe 3 fenders welded together to form the base, and then at least 1/2 inch thick bondo over the whole mess to make it appear smooth. Thats the wrong way-sounds like your truck roof was done by the same people.
 

Forum statistics

Threads
44,151
Posts
950,435
Members
36,268
Latest member
JUKA
Top