Nasty gas tank

Disclaimer: Links on this page pointing to Amazon, eBay and other sites may include affiliate code. If you click them and make a purchase, we may earn a small commission.

gerhed

gerhed

Full Access Member
Joined
Jul 7, 2024
Posts
62
Reaction score
165
Location
Kentucky
First Name
Jason
Truck Year
1983
Truck Model
K20
Engine Size
350
Ok kids, I'm looking for some advice. My old 83 has bad gas in it. I syphoned out as much as I could. I had put about 10 gallons in on what I thought was a dry tank, but I guess there was a gallon of so of bad in there. Well, the new gas went bad in about two weeks, and boys, I mean bad. So, short of dropping the tank, and possibly replacing it, what can I do here? Can I just put fresh gas in and drive it out a couple times and stop this, or is a new tank about my only option?
 
PrairieDrifter

PrairieDrifter

Full Access Member
Joined
Dec 28, 2014
Posts
3,858
Reaction score
5,656
Location
North Dakota
First Name
Mason
Truck Year
84,79,77,76,70,48
Truck Model
Suburban k10, bonanza k10, k30, k20, c10, gmc 1/2ton
Engine Size
350, 350, 350, 350, 350, 350
gerhed said:
Ok kids, I'm looking for some advice. My old 83 has bad gas in it. I syphoned out as much as I could. I had put about 10 gallons in on what I thought was a dry tank, but I guess there was a gallon of so of bad in there. Well, the new gas went bad in about two weeks, and boys, I mean bad. So, short of dropping the tank, and possibly replacing it, what can I do here? Can I just put fresh gas in and drive it out a couple times and stop this, or is a new tank about my only option?
Click to expand...
Depends what it looks like coming out. Pull as much of the old gas out then put some fresh in and go drive the rest out.

Would maybe do it a couple times. Just to make sure it's all out.

If it looks rusty, you'll be miles ahead just getting a new tank and sending unit.
 
gerhed

gerhed

Full Access Member
Joined
Jul 7, 2024
Posts
62
Reaction score
165
Location
Kentucky
First Name
Jason
Truck Year
1983
Truck Model
K20
Engine Size
350
It ain't rusty, just very yellow and smells of lacquer. Was causing a stutter, maybe. Old quadrajet had issues. Anywho, yeah fresh gas, new carb, drive the **** out of it. Fingers crossed, lol.
 
gerhed

gerhed

Full Access Member
Joined
Jul 7, 2024
Posts
62
Reaction score
165
Location
Kentucky
First Name
Jason
Truck Year
1983
Truck Model
K20
Engine Size
350
Whew, whole shop smells like somebody been finishing furniture down here. No wonder it was missing, lol
 
Grit dog

Grit dog

Full Access Member
Joined
May 18, 2020
Posts
6,990
Reaction score
12,263
Location
Auburn, Washington
First Name
Todd
Truck Year
1986, 1977
Truck Model
K20, C10
Engine Size
454, 350
Seafoam is supposed to dissolve varnish as well.
Guess the question is can you dissolve it and the gas still be good enough to run it? Not something I have the answer to.
Best way imo would be to drop the tank and clean it out, which I understand trying to avoid if everything works fine with the sender and it’s not rusted out or leaking.
Sort of a gamble to keep throwing $ at gas if you have to siphon it back out.
I’ve not dealt with a car with a varnished tank but an old snomachine (more prone to running poor, detonating etc than a 4s engine imo). Don’t think the gas ever dissolved the varnish over several tanks. Because I kept picking up flakes of it in the fuel filter for an entire winter.
 
9

90Supurban

Junior Member
Joined
Jun 21, 2024
Posts
15
Reaction score
14
Location
Midwest
First Name
D
Truck Year
1990
Truck Model
V1500
Engine Size
5.7
Might want to travel with a couple of extra inline fuel filters for a while if you're breaking that varnish free. Reminds me of a Roadkill episode where they recovered some vehicle that had a known nasty fuel system. They stuck about 4 inline fuel filters in the system in series, yanking the first one in line each time the car started to get starved of fuel.
 
75gmck25

75gmck25

Full Access Member
Joined
Oct 13, 2016
Posts
2,280
Reaction score
2,223
Location
Northern Virginia
First Name
Bruce
Truck Year
1975
Truck Model
K25 Camper Special TH350 NP203
Engine Size
5.7
On Roadkill TV show they always put at least two of the large diameter metal-body fuel filters inline before the fuel pump when they pull a junked car out of the yard. If the engine starts to starve for fuel they remove the filter closest to the tank and replace it with a section of hose. If it happens again, then they replace both filters.
 
Snoots

Snoots

Full Access Member
Joined
Jan 23, 2013
Posts
8,776
Reaction score
18,273
Location
Georgia
First Name
Roger
Truck Year
1973
Truck Model
Jimmy Sierra
Engine Size
350 w/203
Pull the tank and completely drain it. Take it to a rediator shop and they can hot tank and pressure test it. Some shops can even put a sealer in and paint it for you.
 
gerhed

gerhed

Full Access Member
Joined
Jul 7, 2024
Posts
62
Reaction score
165
Location
Kentucky
First Name
Jason
Truck Year
1983
Truck Model
K20
Engine Size
350
Wow, thanks for all the advice guys.

So here's what I did. I forgot to mention that I had put some, well ok, a lot, of Lucas fuel treatment and injector cleaner into the tank along with some octane booster when I first put fresh fuel in it. I think it may have dissolved a bunch of varnish into the fuel. Syphoned it out. Grabbed a 5 gallon can of fresh gas, put it in the bed and took off down the road til it ran completely dry and won't even start. Put in the fresh gas and it seems to be doing better. The smell is gone anyway and it's running very smooth.
 
Last edited:
gerhed

gerhed

Full Access Member
Joined
Jul 7, 2024
Posts
62
Reaction score
165
Location
Kentucky
First Name
Jason
Truck Year
1983
Truck Model
K20
Engine Size
350
And, I think I got a wheel bearing going out, lol. Passenger side hub is warm and something was growling when I got speed up for a couple miles. For another post, lol.
 
Grit dog

Grit dog

Full Access Member
Joined
May 18, 2020
Posts
6,990
Reaction score
12,263
Location
Auburn, Washington
First Name
Todd
Truck Year
1986, 1977
Truck Model
K20, C10
Engine Size
454, 350
gerhed said:
Wow, thanks for all the advice guys.

So here's what I did. I forgot to mention that I had put some, well ok, a lot, of Lucas fuel treatment and injector cleaner into the tank along with some octane booster when I first put fresh fuel in it. I think it may have dissolved a bunch of varnish into the fuel. Syphoned it out. Grabbed a 5 gallon can of fresh gas, put it in the bed and took off down the road til it ran completely dry and won't even start. Put in the fresh gas and it seems to be doing better. The smell is gone anyway and it's running very smooth.
Click to expand...
Lol, yeah forgot to mention. I interpreted your post as is it was so bad it was making gas go bad enough to not run.
As long as it doesn’t plug up the sock on the fuel pickup which it hasn’t yet, you should be able to dissolve it and move on without dropping the tank.
 
Last edited:
Craig Nedrow

Craig Nedrow

NADAR UNDER THE RADAR
Supporting Member
Joined
Sep 1, 2018
Posts
1,055
Reaction score
2,204
Location
Washington State
First Name
Craig
Truck Year
1973 (have two), 1985
Truck Model
K10, K20, C20
Engine Size
350, 454, 6.2 Detroit
Ahh the easy fix…
 
Grit dog

Grit dog

Full Access Member
Joined
May 18, 2020
Posts
6,990
Reaction score
12,263
Location
Auburn, Washington
First Name
Todd
Truck Year
1986, 1977
Truck Model
K20, C10
Engine Size
454, 350
And although clear plastic filters aren’t recommended for long term use I’d add one, preferably in a convenient spot. (If your truck still has the OE hardline from fp to carb I wouldn’t cut it)
Then you can see and catch what’s coming out of the tank and quickly replace the filter if it’s inhaling varnish flakes. (It won’t unless the sock on the fuel pickup in the tank is off or also degraded.)
 
You must log in or register to reply here.

Similar threads

Martimus
Gas tank swap
Replies
2
Views
716
SquareRoot
SquareRoot
mjck5
gas tank wont fill all the way
Replies
5
Views
265
WFO
WFO
SamHam
Gas hog
2 3 4
Replies
48
Views
2K
Ricko1966
R
C
Gas tank hardware/missing pieces
Replies
0
Views
510
Croc1990
C
saig55
Fuel Tank Replacement
Replies
3
Views
1K
75gmck25
75gmck25

Latest posts

Forum statistics

Threads
44,209
Posts
951,804
Members
36,354
Latest member
KenLambert
Top