squaredeal91
Full Access Member
- Joined
- Mar 10, 2023
- Posts
- 2,508
- Reaction score
- 4,512
- Location
- Cave junction Oregon
- First Name
- Greg bush
- Truck Year
- 1991 SB
- Truck Model
- K30
- Engine Size
- 5.9 Cummins 12 valve
if this fits I might buy one too lol
RETRO-Mod: Jeep intermediate steering shaft
- Thread starter RetroC10Sport
- Start date
Disclaimer: Links on this page pointing to Amazon, eBay and other sites may include affiliate code. If you click them and make a purchase, we may earn a small commission.
dd1990
Member
- Joined
- Nov 3, 2023
- Posts
- 36
- Reaction score
- 67
- Location
- Ventura CA
- First Name
- David
- Truck Year
- 1990
- Truck Model
- Suburban 1500
- Engine Size
- 350
Its a direct swap, there's isn't one for K but it should fit a K, I don't know what 14 spline is about, the one I picked up had a 26 spline. If you want to do this swap you also need gm bolt Part #11610555
90Supurban
Junior Member
- Joined
- Jun 21, 2024
- Posts
- 15
- Reaction score
- 14
- Location
- Midwest
- First Name
- D
- Truck Year
- 1990
- Truck Model
- V1500
- Engine Size
- 5.7
dd1990, now I see your other post mentioning this alternate steering shaft! Link for others.
www.gmsquarebody.com
Square Body C3500 steering shaft swap
Havened seen anyone mention this here. I just swapped out my old rag joint steering shaft for a C3500 steering shaft. C3500 steering shaft has a u-joint connection at the gear box. Safer than the XJ swap since the connection at the column is with a normal cross bolt compared to the clamp style...
www.gmsquarebody.com
Bronze Knight
Full Access Member
- Joined
- Aug 4, 2020
- Posts
- 75
- Reaction score
- 180
- Location
- USA VA
- First Name
- Robert
- Truck Year
- 1985
- Truck Model
- K30
- Engine Size
- 454
Per the other thread by dd1990, I got Dorman part # 425-177 for $130 off Amazon. I pulled out the Jeep shaft and put the C3500 shaft in. It's a perfect fit. I'll post pictures of it in the truck tomorrow. For today I have comparison photos of the original shaft, the Jeep shaft, and the C3500/Dorman 425-177 shaft.
You must be registered for see images attach
You must be registered for see images attach
You must be registered for see images attach
You must be registered for see images attach
You must be registered for see images attach
Bronze Knight
Full Access Member
- Joined
- Aug 4, 2020
- Posts
- 75
- Reaction score
- 180
- Location
- USA VA
- First Name
- Robert
- Truck Year
- 1985
- Truck Model
- K30
- Engine Size
- 454
More photos
You must be registered for see images attach
You must be registered for see images attach
You must be registered for see images attach
Bronze Knight
Full Access Member
- Joined
- Aug 4, 2020
- Posts
- 75
- Reaction score
- 180
- Location
- USA VA
- First Name
- Robert
- Truck Year
- 1985
- Truck Model
- K30
- Engine Size
- 454
Got the bottom bolt in today, picked up a normal grade 8 M10x1.5x30 flange head bolt form the hardware store see pictures attached. Haven’t taken it for a drive yet but I can say I like not having to modify the shaft at all to get it in there and the dampener is the same style as the original shaft. The jeep one is different.
Attachments
Juan Cano
Full Access Member
- Joined
- Jun 7, 2021
- Posts
- 92
- Reaction score
- 38
- Location
- Warwick, RI
- First Name
- Juan
- Truck Year
- 1986
- Truck Model
- C10
- Engine Size
- 350 Goodwrench Crate
I SOMEHOW screwed up this swap. I bought the part, both ends fit but I thought the column would stretch out more.... and it didn't!! It's short like 3/4". Sigh. I must've bought the rworng one. I already drilled a hole on one end so can't send back.
You must be registered for see images attach
You must be registered for see images attach
75gmck25
Full Access Member
- Joined
- Oct 13, 2016
- Posts
- 2,253
- Reaction score
- 2,192
- Location
- Northern Virginia
- First Name
- Bruce
- Truck Year
- 1975
- Truck Model
- K25 Camper Special TH350 NP203
- Engine Size
- 5.7
I bought the Borgeson steering shaft and thought I had a similar problem. Turned out to be a non-issue, so maybe the solution will work on yours.
Called them and they told me to pull that black rubber bellows down the shaft to expose the slip joint underneath. On the bottom of the shaft there was an Allen head set screw that I loosened, and the shaft extended even more so I got an exact fit. Tightened the set screw and pulled the rubber back over to cover the joint. YMMV
Called them and they told me to pull that black rubber bellows down the shaft to expose the slip joint underneath. On the bottom of the shaft there was an Allen head set screw that I loosened, and the shaft extended even more so I got an exact fit. Tightened the set screw and pulled the rubber back over to cover the joint. YMMV
Juan Cano
Full Access Member
- Joined
- Jun 7, 2021
- Posts
- 92
- Reaction score
- 38
- Location
- Warwick, RI
- First Name
- Juan
- Truck Year
- 1986
- Truck Model
- C10
- Engine Size
- 350 Goodwrench Crate
I didn't see the allen screw but will check, thank you. I decided to buy the more expensive Borgeson too, a more experienced friend told me to not mess with a steering hack.
squaredeal91
Full Access Member
- Joined
- Mar 10, 2023
- Posts
- 2,508
- Reaction score
- 4,512
- Location
- Cave junction Oregon
- First Name
- Greg bush
- Truck Year
- 1991 SB
- Truck Model
- K30
- Engine Size
- 5.9 Cummins 12 valve
Attachments
squaredeal91
Full Access Member
- Joined
- Mar 10, 2023
- Posts
- 2,508
- Reaction score
- 4,512
- Location
- Cave junction Oregon
- First Name
- Greg bush
- Truck Year
- 1991 SB
- Truck Model
- K30
- Engine Size
- 5.9 Cummins 12 valve
^^^^^^^^^^
Could you see if you could gain some here?
Could you see if you could gain some here?
- Joined
- Aug 18, 2010
- Posts
- 10,310
- Reaction score
- 10,133
- Location
- North East Texas
- First Name
- Shawn
- Truck Year
- 1982 & 1985
- Truck Model
- K10 Extra Cab w/ Proper SWB, & 85 K5 Blazer
- Engine Size
- 454 BBC, & 383 Stroker
If you want to sell the shaft that is too short let me know I'll buy it.
