350 sounds like a diesel engine

Disclaimer: Links on this page pointing to Amazon, eBay and other sites may include affiliate code. If you click them and make a purchase, we may earn a small commission.

wbcook5

wbcook5

Junior Member
Joined
Mar 9, 2024
Posts
3
Reaction score
5
Location
Mississippi
First Name
Will
Truck Year
1983
Truck Model
c1500
Engine Size
5.7
I have a supposedly low mile Goodwrench Targetmaster 350 crate motor in my '83. It runs great, has fantastic oil pressure, but it sounds like a diesel engine. The noise is most noticeable at idle and doesn't appear until the engine has been running for a minute or so. I have tried using a pipe "stethoscope", but can't seem to pinpoint the location of the noise. I have unbolted the torque converter to rule it out and the noise remains. Timing was verified with a light. I hear the noise the best underneath the truck near the driver side rear of the engine close to the oil filter. Any ideas or suggestions?

I tried posting a video, but apparently I am not tech savvy enough to figure that out.
 
DoubleDingo

DoubleDingo

Full Access Member
Joined
Jul 3, 2012
Posts
11,259
Reaction score
17,205
Location
Right where I am
First Name
Bagoomba
Truck Year
1981
Truck Model
81-C20 Silverado Camper Special-TH400-4.10s
Engine Size
Carb'ed Vortec 350
Do what @Rickf said, then with fresh oil and filter, get the oil pumping and up to pressure for a few minutes and then adjust the valves with the two-roll method. Adjust the valves if there isn't any flakes in the oil when you drain it and cut open the filter. If there's flakes, you have different problems than valve train.
 
DoubleDingo

DoubleDingo

Full Access Member
Joined
Jul 3, 2012
Posts
11,259
Reaction score
17,205
Location
Right where I am
First Name
Bagoomba
Truck Year
1981
Truck Model
81-C20 Silverado Camper Special-TH400-4.10s
Engine Size
Carb'ed Vortec 350
Two roll valve adjustment....

You must be registered for see images attach



You must be registered for see images attach
 
wbcook5

wbcook5

Junior Member
Joined
Mar 9, 2024
Posts
3
Reaction score
5
Location
Mississippi
First Name
Will
Truck Year
1983
Truck Model
c1500
Engine Size
5.7
I will do an oil change and post the results. In the meantime, here’s a link for a YouTube video I made showing the sound the engine is making.
xc_hide_links_from_guests_guests_error_hide_media
 
bucket

bucket

Super Moderator
Staff member
Super Moderator
Joined
Aug 3, 2010
Posts
30,447
Reaction score
28,360
Location
Usually not in Ohio
First Name
Andy
Truck Year
'77, '78, '79, '84, '88
Truck Model
K5 thru K30
Engine Size
350-454
wbcook5 said:
I will do an oil change and post the results. In the meantime, here’s a link for a YouTube video I made showing the sound the engine is making.
xc_hide_links_from_guests_guests_error_hide_media
Click to expand...

Wow, it really DOES sound like a diesel! What happens to the sound when you rev up the engine? Does it kinda go away or does it rattle a bunch more when you wing it a couple times?
 
wbcook5

wbcook5

Junior Member
Joined
Mar 9, 2024
Posts
3
Reaction score
5
Location
Mississippi
First Name
Will
Truck Year
1983
Truck Model
c1500
Engine Size
5.7
bucket said:
Wow, it really DOES sound like a diesel! What happens to the sound when you rev up the engine? Does it kinda go away or does it rattle a bunch more when you wing it a couple times?
Click to expand...
It doesn’t go away completely. I can still hear a sort of ticking off idle but it’s hard to hear it over the fan and exhaust.
 
bucket

bucket

Super Moderator
Staff member
Super Moderator
Joined
Aug 3, 2010
Posts
30,447
Reaction score
28,360
Location
Usually not in Ohio
First Name
Andy
Truck Year
'77, '78, '79, '84, '88
Truck Model
K5 thru K30
Engine Size
350-454
wbcook5 said:
It doesn’t go away completely. I can still hear a sort of ticking off idle but it’s hard to hear it over the fan and exhaust.
Click to expand...

Right, but what if you romp on the gas pedal a couple times? Like, let it really spin up a bit. Is there a horrible noise to go along with it? If not, that can be a good sign.
 
Grit dog

Grit dog

Full Access Member
Joined
May 18, 2020
Posts
6,981
Reaction score
12,243
Location
Auburn, Washington
First Name
Todd
Truck Year
1986, 1977
Truck Model
K20, C10
Engine Size
454, 350
I have had plenty of small blocks with exhaust leaks. Didn’t sound like that. Hell, have a couple now but ones big block…
Sounds like a really loud valvetrain.
 
DoubleDingo

DoubleDingo

Full Access Member
Joined
Jul 3, 2012
Posts
11,259
Reaction score
17,205
Location
Right where I am
First Name
Bagoomba
Truck Year
1981
Truck Model
81-C20 Silverado Camper Special-TH400-4.10s
Engine Size
Carb'ed Vortec 350
Grit dog said:
I have had plenty of small blocks with exhaust leaks. Didn’t sound like that. Hell, have a couple now but ones big block…
Sounds like a really loud valvetrain.
Click to expand...
Exhaust leaks come in different sizes, I hear an exhaust leak underneath. But, it's just a video, hard to tell.
 
P

peats

Full Access Member
Joined
Dec 2, 2016
Posts
305
Reaction score
262
Location
Pennsylvania
First Name
john
Truck Year
72k5, 81c10 short step, 83k10 short fleet, 03 SSR. 25 chevy doodlebug
Truck Model
k5 c10 k10 SSR doodlebug
Engine Size
406 360 6.2 5.3 171
Get a stethascope at HF and pinpoint the location. If your truck has cats don't forget to check them.
 
R

Robert Bare

Full Access Member
Joined
Sep 13, 2020
Posts
107
Reaction score
168
Location
MT
First Name
Robert
Truck Year
1978
Truck Model
k20
Engine Size
5.7
Between the fan and sounding like loud exhaust in a closed garage, not sure what noise you are talking about. The ticking noise???
 
squaredeal91

squaredeal91

Full Access Member
Joined
Mar 10, 2023
Posts
2,539
Reaction score
4,588
Location
Cave junction Oregon
First Name
Greg bush
Truck Year
1991 SB
Truck Model
K30
Engine Size
5.9 Cummins 12 valve
Just rewatched the video a couple times. and it sounds like valvetrain either out of adjustment or your using way too thin of oil or low oil pressure. Have you changed oil yet? What weight did you use
 
J

JBswth

Full Access Member
Joined
Jan 24, 2022
Posts
225
Reaction score
188
Location
Vallejo, California
First Name
James
Truck Year
1973
Truck Model
C25
Engine Size
292 cubic inches
wbcook5 said:
I have a supposedly low mile Goodwrench Targetmaster 350 crate motor in my '83. It runs great, has fantastic oil pressure, but it sounds like a diesel engine. The noise is most noticeable at idle and doesn't appear until the engine has been running for a minute or so. I have tried using a pipe "stethoscope", but can't seem to pinpoint the location of the noise. I have unbolted the torque converter to rule it out and the noise remains. Timing was verified with a light. I hear the noise the best underneath the truck near the driver side rear of the engine close to the oil filter. Any ideas or suggestions?

I tried posting a video, but apparently I am not tech savvy enough to figure that out.
Click to expand...
When you say "Sounds like a diesel", do you mean that it sounds like excessive clearance in the connecting rods? Loose piston pins? If the noise is right near the oil filter, I would check my connecting rods, starting with the rear-most rod. You could have one that overly large inserts for a larger size crank pin ie, your crank pins were reground .010 undersize, but one rod has a .030 undersize bearing. That excessive clearance will be audible if it is large enough. Also will cause a large amount of oil to drain out, potentially depriving the rest of your engine of adequate lubrication.

J. B.
 
You must log in or register to reply here.

Similar threads

1950fordwoodie
Engine oil capacity
Replies
1
Views
207
HotWheelsBurban
H
Ryanbrown36
Olds 350 diesel to sbc swap
2
Replies
25
Views
941
Ryanbrown36
Ryanbrown36
F
1987 V3500 Engine update
Replies
3
Views
239
fast 99
fast 99
B
Engine Block Heater for SBC 350
2
Replies
25
Views
847
Keith Seymore
Keith Seymore
tj43
New engine installed - need TBI timing/idle help
Replies
7
Views
812
tj43
tj43

Latest posts

Forum statistics

Threads
44,187
Posts
951,145
Members
36,310
Latest member
BLAKMAX
Top