Fluid Changes

Disclaimer: Links on this page pointing to Amazon, eBay and other sites may include affiliate code. If you click them and make a purchase, we may earn a small commission.

TX87R10

TX87R10

Full Access Member
Joined
Jun 25, 2020
Posts
1,078
Reaction score
2,250
Location
Texas
First Name
Txr10
Truck Year
1987
Truck Model
R10
Engine Size
305
Here is my recommendation - everyone wants you to use like 5w-20 but you know why? It is too gummy and leads to having to change it and I mean like every 5k miles... Most of us here use Grapeseed Oil mixed with vinegar instead of conventional motor oil. It provides better lubricity and the vinegar keeps things cleaned. If you hear a weird knocking after changing the oil try gassing it up to about 5k RPM to fix it.

I can't help you on the axels but I would drain the oil out of them. You don't want too much oil

If you need pictures of where to put the oil lmk
 
ali_c20

ali_c20

Full Access Member
Joined
Sep 20, 2016
Posts
1,310
Reaction score
1,877
Location
Austria
First Name
Alexander
Truck Year
1974, 1979
Truck Model
C20, K5
Engine Size
350, 350
TX87R10 said:
Here is my recommendation - everyone wants you to use like 5w-20 but you know why? It is too gummy and leads to having to change it and I mean like every 5k miles... Most of us here use Grapeseed Oil mixed with vinegar instead of conventional motor oil. It provides better lubricity and the vinegar keeps things cleaned. If you hear a weird knocking after changing the oil try gassing it up to about 5k RPM to fix it.

I can't help you on the axels but I would drain the oil out of them. You don't want too much oil

If you need pictures of where to put the oil lmk
Click to expand...
Another benefit of removing all the oil is that it reduces weight and gives you lower quarter mile times.
 
75gmck25

75gmck25

Full Access Member
Joined
Oct 13, 2016
Posts
2,280
Reaction score
2,224
Location
Northern Virginia
First Name
Bruce
Truck Year
1975
Truck Model
K25 Camper Special TH350 NP203
Engine Size
5.7
Simplest choice is to use 5 quarts of 10w30 full synthetic for an SBC. Even 10w30 Dino oil will work fine, but it will need to be changed more often. Cheapest source is usually the 5 quart jugs at Walmart.

Since you probably have a flat tappet cam, it really should have added ZDDP in the oil to protect the cam lobes from wear. Mobil 1 15w50 has 1300 ZDDP (compared to 800-900 in most of their other oil), but it’s a little harder to find in the store.

Axle is a lower priority. Ensure the fill hole bolt will come out (they can really stick), check the level in your axles first, and then make sure you have the right cover gaskets. Then take on the job of changing the axle gear oil. Check around the driveshaft seal for leaks.
 
SquareRoot

SquareRoot

Full Access Member
Joined
Mar 18, 2017
Posts
4,202
Reaction score
8,061
Location
Arizona
First Name
Mike
Truck Year
85
Truck Model
K20
Engine Size
350
I recall sitting in the back of a CH 53 packed in like sardines flying nap of the earth across Afghanistan. The other Marines were probably thinking about their families back home and if they would see them again. Me? All I can think about is the constant drip drip drip of hydraulic fluid leaking from the pipe overhead and running down the side of my neck. I finally got the cargo masters attention, it was dark and we were lights out, and told him the leak might be a problem. His response: Nah, were good, let me know when it stops leaking then we have a problem. Wonderful. Now I'm curious how flammable hydraulic fluid is. :hmm:
 
Last edited:
fast 99

fast 99

Full Access Member
Joined
Dec 31, 2021
Posts
2,039
Reaction score
2,967
Location
Spokane, Washington
First Name
Brian
Truck Year
81,85
Truck Model
K20
Engine Size
350
Yes, check oil condition in the axles and change if needed.

If it's been a while or you don't know the history a good idea to look inside for metal pieces. I have caught many diffs [that weren't noisy] before complete failure by pulling covers.
 
85K304SPD

85K304SPD

Full Access Member
Joined
Mar 29, 2022
Posts
473
Reaction score
704
Location
Las Cruces, NM
First Name
Richard
Truck Year
1985
Truck Model
K30
Engine Size
402
I think he is asking a serious question. There is so many different oils.
In all of my flat tappet, gas engines, I run Valvoline VR1 20w-50. Good for everything about a square. Plenty of zinc for the cam, heavy enough for the high rpms and heavy loads. Here we go...
 
squaredeal91

squaredeal91

Full Access Member
Joined
Mar 10, 2023
Posts
2,549
Reaction score
4,611
Location
Cave junction Oregon
First Name
Greg bush
Truck Year
1991 SB
Truck Model
K30
Engine Size
5.9 Cummins 12 valve
10w30, 30wt, 15w40, 20/50 oil, depending on application and temperature for these engines. Maybe try a couple. My friends 75 ford 360 runs better on 30wt than on 10w30. That might sound like bs but it's true. Switching to 30 actually made a difference in the way the engine sounded and it's smoothness.
Edit: How much oil? Depends on each and how long you let it drip. On our suburban normal oil change is 5 qts. If I let it drip all night it takes every bit of 6qts.
 
You must log in or register to reply here.

Similar threads

A
Advice on Transmission Fluid Change for 1980 C10
2
Replies
17
Views
813
Turbo4whl
Turbo4whl
T
Whitch 3/4 ton axels
Replies
8
Views
1K
bucket
bucket
CheemsK1500
Definitive interchangeable parts thread 73-87(91) (non-drivetrain)
2
Replies
15
Views
4K
CheemsK1500
CheemsK1500
Nasty-LSX
I never knew how hot P/S fluid gets. New conversion. Pic's inside.
Replies
11
Views
943
Nasty-LSX
Nasty-LSX
F
Wiring/Gauge questions
Replies
0
Views
250
F51 LRS
F

Latest posts

Forum statistics

Threads
44,218
Posts
951,975
Members
36,373
Latest member
packers24245
Top