Edelbrock accelerator pump

Disclaimer: Links on this page pointing to Amazon, eBay and other sites may include affiliate code. If you click them and make a purchase, we may earn a small commission.

410 John

410 John

Full Access Member
Joined
Jan 26, 2023
Posts
316
Reaction score
769
Location
HdG, Maryland
First Name
John
Truck Year
1983
Truck Model
C10
Engine Size
350 4bbl 4 speed
I have that timing tube and it looks like “o” is one of the marks right next it it. However, the balancer isn’t under the timing tab. It forward, the pulleys line up. So something is mismatched. The truck was a 305 and is now a 350. When I look down I can BARELY see the back edge of the balancer.
I’ll probably take the valve cover off and double check the mark and make my own if I have to.
 
R

Ricko1966

Full Access Member
Joined
Apr 11, 2017
Posts
5,397
Reaction score
8,610
Location
kansas
First Name
Rick
Truck Year
1975
Truck Model
c20
Engine Size
350
410 John said:
I have that timing tube and it looks like “o” is one of the marks right next it it. However, the balancer isn’t under the timing tab. It forward, the pulleys line up. So something is mismatched. The truck was a 305 and is now a 350. When I look down I can BARELY see the back edge of the balancer.
I’ll probably take the valve cover off and double check the mark and make my own if I have to.
Click to expand...
If it didn't stumble before with the timing where it is. It's not stumbling now because of timing .dont mess with the timing. That just adds another variable to the equation. I you are going to make a timing mark you can't do it by removing a valve cover,you'll need a piston stop. I can get real close feeling the piston come up,using a drinking straw through the plug hole.
 
Last edited:
squaredeal91

squaredeal91

Full Access Member
Joined
Mar 10, 2023
Posts
2,510
Reaction score
4,515
Location
Cave junction Oregon
First Name
Greg bush
Truck Year
1991 SB
Truck Model
K30
Engine Size
5.9 Cummins 12 valve
410 John said:
I have that timing tube and it looks like “o” is one of the marks right next it it. However, the balancer isn’t under the timing tab. It forward, the pulleys line up. So something is mismatched. The truck was a 305 and is now a 350. When I look down I can BARELY see the back edge of the balancer.
I’ll probably take the valve cover off and double check the mark and make my own if I have to.
Click to expand...
Pics? I'm visual learner
 
squaredeal91

squaredeal91

Full Access Member
Joined
Mar 10, 2023
Posts
2,510
Reaction score
4,515
Location
Cave junction Oregon
First Name
Greg bush
Truck Year
1991 SB
Truck Model
K30
Engine Size
5.9 Cummins 12 valve
Im with @Ricko1966, Was running good before. Must be in your carb since you ruled out ignition by swapping parts. Changing ignition timing would be a bandaid.
 
410 John

410 John

Full Access Member
Joined
Jan 26, 2023
Posts
316
Reaction score
769
Location
HdG, Maryland
First Name
John
Truck Year
1983
Truck Model
C10
Engine Size
350 4bbl 4 speed
Ills see if I can take a pic tonight.
I messed with the time, because the wires were all moved over one terminal. I wanted to fix it while the carb was off.
 
75gmck25

75gmck25

Full Access Member
Joined
Oct 13, 2016
Posts
2,254
Reaction score
2,194
Location
Northern Virginia
First Name
Bruce
Truck Year
1975
Truck Model
K25 Camper Special TH350 NP203
Engine Size
5.7
If you get a piston stop, and then find the balancer is one that puts TDC at the 2:00 position, use an aftermarket timing pointer that attaches to two of the timing cover bolts.
 
squaredeal91

squaredeal91

Full Access Member
Joined
Mar 10, 2023
Posts
2,510
Reaction score
4,515
Location
Cave junction Oregon
First Name
Greg bush
Truck Year
1991 SB
Truck Model
K30
Engine Size
5.9 Cummins 12 valve
Have you checked vacuum advance pod? Is it working? Does the carb have proper vacuum to that port for vacuum advance?
 
410 John

410 John

Full Access Member
Joined
Jan 26, 2023
Posts
316
Reaction score
769
Location
HdG, Maryland
First Name
John
Truck Year
1983
Truck Model
C10
Engine Size
350 4bbl 4 speed
I haven’t checked the vac pod. But, I will. I know the mechanical advance is t frozen. The carb has two vac ports. Right now I have it to manifold vacuum. That’s what the inseems to say for non EGR engines.
The pointer is at 2 o’clock. But, I’ll get a pic.
I always thought this 350 was sluggish. Maybe it will gain some pep.
 
410 John

410 John

Full Access Member
Joined
Jan 26, 2023
Posts
316
Reaction score
769
Location
HdG, Maryland
First Name
John
Truck Year
1983
Truck Model
C10
Engine Size
350 4bbl 4 speed
It’s hard to see, but the shiny part under the water pump is the back edge of the balancer. Plus the bottom view.
 

Attachments

  • BC2E0D7A-3F9D-43EC-BFDB-E5BF8E213B3F.jpeg
    BC2E0D7A-3F9D-43EC-BFDB-E5BF8E213B3F.jpeg
    75.1 KB · Views: 23
  • 1E1548D2-8495-429C-A3D9-67233212C239.jpeg
    1E1548D2-8495-429C-A3D9-67233212C239.jpeg
    168.7 KB · Views: 25
  • 2156E896-65A8-44DA-92AE-F4FCD6448A78.jpeg
    2156E896-65A8-44DA-92AE-F4FCD6448A78.jpeg
    103.1 KB · Views: 23
410 John

410 John

Full Access Member
Joined
Jan 26, 2023
Posts
316
Reaction score
769
Location
HdG, Maryland
First Name
John
Truck Year
1983
Truck Model
C10
Engine Size
350 4bbl 4 speed
Not my pics. But, balancer is spaced out like the blue engine pic a my tab I calibrated like the other pic. Without the water pump everything is visible. Mines not. I will try to mark the line a little better.
 

Attachments

  • FE001B9F-CAD9-4545-8B95-E2AEF3924E43.jpeg
    FE001B9F-CAD9-4545-8B95-E2AEF3924E43.jpeg
    117.1 KB · Views: 23
  • B9EE201B-6BE9-4E31-B651-17FFFD4FDD5F.jpeg
    B9EE201B-6BE9-4E31-B651-17FFFD4FDD5F.jpeg
    22.4 KB · Views: 23
squaredeal91

squaredeal91

Full Access Member
Joined
Mar 10, 2023
Posts
2,510
Reaction score
4,515
Location
Cave junction Oregon
First Name
Greg bush
Truck Year
1991 SB
Truck Model
K30
Engine Size
5.9 Cummins 12 valve
410 John said:
Not my pics. But, balancer is spaced out like the blue engine pic a my tab I calibrated like the other pic. Without the water pump everything is visible. Mines not. I will try to mark the line a little better.
Click to expand...
I can see how your balancer looks stepped out a little but not too much. It's still under the marker. Is your crankshaft bolt tight?
 
410 John

410 John

Full Access Member
Joined
Jan 26, 2023
Posts
316
Reaction score
769
Location
HdG, Maryland
First Name
John
Truck Year
1983
Truck Model
C10
Engine Size
350 4bbl 4 speed
My pics are the 3 above. The blue engine pics(not mine)are very similar. I would say my balancer is a bit further out. I don’t know when, but I’ll find time to work on it. I have my biggest food truck event of the year coming up. Super busy.
 
squaredeal91

squaredeal91

Full Access Member
Joined
Mar 10, 2023
Posts
2,510
Reaction score
4,515
Location
Cave junction Oregon
First Name
Greg bush
Truck Year
1991 SB
Truck Model
K30
Engine Size
5.9 Cummins 12 valve
410 John said:
My pics are the 3 above. The blue engine pics(not mine)are very similar. I would say my balancer is a bit further out. I don’t know when, but I’ll find time to work on it. I have my biggest food truck event of the year coming up. Super busy.
Click to expand...
I was mainly talking about your pic of your balancer. Not blue engine
 
You must log in or register to reply here.

Similar threads

S
in tank fuel pump with Edelbrock carb
Replies
6
Views
530
SquareRoot
SquareRoot
BurbanPena
edelbrock avs2 650
2 3
Replies
32
Views
3K
82sbshortbed
82sbshortbed
E
How do I test mechanical fuel pump
Replies
4
Views
308
Ricko1966
R
S
What a mess Edelbrock cleaning
2
Replies
15
Views
2K
Scribbles
S
D
Fuel Pump Selection
Replies
5
Views
1K
sidschev
sidschev

Latest posts

Forum statistics

Threads
44,113
Posts
949,481
Members
36,207
Latest member
Sonny98370
Top