Truck Size

Disclaimer: Links on this page pointing to Amazon, eBay and other sites may include affiliate code. If you click them and make a purchase, we may earn a small commission.

GTX63

GTX63

Full Access Member
Joined
Nov 27, 2022
Posts
933
Reaction score
3,792
Location
Tennessee
First Name
Ty
Truck Year
1985
Truck Model
K10
Engine Size
350
LS swaps are helping to keep the squarebodies in the mainstream and can be done with a moderate amount of skill and patience. This also means that the market for the 2000-2007ish models will likely increase as well. But, the cost for the electronics, diagnostic tools, drivetrains, etc and the challenges to rehab the newer stuff outside of a dealership are going to make much of what has been built in the past 10 years more or less, disposable. How the government regulates oil, antique vehicles, inspections, taxes etc will all affect whether muscles cars stay around or we just morph into driving the people's car.
 
1lejohn

1lejohn

Full Access Member
Joined
May 14, 2012
Posts
325
Reaction score
749
Location
texas
First Name
john
Truck Year
1985 , 2004
Truck Model
k-1500, 2500 HD
Engine Size
350, 6.7
GTX63 said:
I have a late model 2500 that mostly sits in the garage. Everyone has their preference for what they like to drive, I just don't foresee many 2019 Silverados sitting in a guy's garage around 2050 getting a restoration.
Click to expand...
The mechanical parts will be available, and or made. The electronics and wiring such as the can buss, BCM's, TCM's etc. is what will kill them off. I don't for see the aftermarket or the OEM's making those parts for more than 10 years after the model run. The OEM's are already wanting to keep a lot of the parts and diagnostic info proprietary to themselves. I feel that way when I drive by a new truck .
 
J

JBswth

Full Access Member
Joined
Jan 24, 2022
Posts
225
Reaction score
184
Location
Vallejo, California
First Name
James
Truck Year
1973
Truck Model
C25
Engine Size
292 cubic inches
DoubleDingo said:
Vehicles are growing in size, and here, our local government is shrinking lane widths, taking lanes away, all in the name of modernization in an industrial town with tons of ag, oil, and many other industries abundant
Click to expand...
Today's world is so fed up. More and more, I am starting to look forward to the end of the world. I used to fear it. Maybe I am just getting too old!

J. B.
 
J

JBswth

Full Access Member
Joined
Jan 24, 2022
Posts
225
Reaction score
184
Location
Vallejo, California
First Name
James
Truck Year
1973
Truck Model
C25
Engine Size
292 cubic inches
GTX63 said:
LS swaps are helping to keep the squarebodies in the mainstream and can be done with a moderate amount of skill and patience. This also means that the market for the 2000-2007ish models will likely increase as well. But, the cost for the electronics, diagnostic tools, drivetrains, etc and the challenges to rehab the newer stuff outside of a dealership are going to make much of what has been built in the past 10 years more or less, disposable. How the government regulates oil, antique vehicles, inspections, taxes etc will all affect whether muscles cars stay around or we just morph into driving the people's car.
Click to expand...
I say if you have to have an LS, put a carb or carbs on it and a distributor on it. Electronics quickly become obsolete, then they soon quit making replacements. Carbs and distributors are easily rebuildable.

J. B.
 
J

JBswth

Full Access Member
Joined
Jan 24, 2022
Posts
225
Reaction score
184
Location
Vallejo, California
First Name
James
Truck Year
1973
Truck Model
C25
Engine Size
292 cubic inches
Strick said:
I agree with that statement as well. With all the electronics and emissions junk that are on newer vehicles, they are pretty much manufactured to go for 300K miles and then be junked. I've said many times that nobody is ever going to raise a garage door and say "It's a Tesla! My dream car"! I believe the industry is continuing to make it extremely difficult to maintain an older vehicle and if they make them disposable after a certain time period or mileage threshold then Big Brother can put the zap on it and disable remotely.
Long live hydrocarbons and carburetors!

HS
Click to expand...
It is the EPA doing that. They don't want people to keep vehicles that they feel are emitting more poisonous emissions, and scolding people hasn't worked the way they hoped it would, so they give tax credits to auto makers who make their vehicles impossible to fix. That way they will be junked instead of restored.

J. B.
 
R

Ricko1966

Full Access Member
Joined
Apr 11, 2017
Posts
5,456
Reaction score
8,716
Location
kansas
First Name
Rick
Truck Year
1975
Truck Model
c20
Engine Size
350
Even if availability of electronics dies,there will still be enough supplies in the bone yards and NOS to last the rest of all of our lives. It may take a little more knowledge,and creativity. Like old sbc crank triggered ignition on LS and there are tons of ECMs capable of batch firing injectors.
 
H

HotWheelsBurban

Full Access Member
Joined
Mar 31, 2023
Posts
2,410
Reaction score
5,681
Location
Houston, Texas
First Name
Carol
Truck Year
1990
Truck Model
R2500 Suburban
Engine Size
350
Yuppers! After I got my OBS crew cab, I was at the local toy show. Knowing how long the truck is, and knowing what room we had at the venue (and that room doesn't have much parking in front of it), we got there early so we could back in near the door. Two other vendors came in, in new Chevy crew cab shorties, and those truck shaped objects are only a foot or so shorter than my truck...with half the usable bed/load space!
I don't have the bed full on mine often, but when I do, I need all eight feet of it....
 

Attachments

  • IMG_20230423_010826116_HDR.jpg
    IMG_20230423_010826116_HDR.jpg
    135.5 KB · Views: 29
  • IMG_20240315_145652748.jpg
    IMG_20240315_145652748.jpg
    156.1 KB · Views: 31
DoubleDingo

DoubleDingo

Full Access Member
Joined
Jul 3, 2012
Posts
11,255
Reaction score
17,197
Location
Right where I am
First Name
Bagoomba
Truck Year
1981
Truck Model
81-C20 Silverado Camper Special-TH400-4.10s
Engine Size
Carb'ed Vortec 350
HotWheelsBurban said:
Yuppers! After I got my OBS crew cab, I was at the local toy show. Knowing how long the truck is, and knowing what room we had at the venue (and that room doesn't have much parking in front of it), we got there early so we could back in near the door. Two other vendors came in, in new Chevy crew cab shorties, and those truck shaped objects are only a foot or so shorter than my truck...with half the usable bed/load space!
I don't have the bed full on mine often, but when I do, I need all eight feet of it....
Click to expand...
That's quite the psycho dellick rim you have there in the one pic
 
Grit dog

Grit dog

Full Access Member
Joined
May 18, 2020
Posts
6,980
Reaction score
12,233
Location
Auburn, Washington
First Name
Todd
Truck Year
1986, 1977
Truck Model
K20, C10
Engine Size
454, 350
fast 99 said:
Yes they are. Had to use a new rental 1/2 ton Silverado a week ago. Was free, my car was hit and in the body shop. Way higher and larger than either of the SB.

Throttle was a suggestion, sluggish from a stop. Motor and tranny had to think a while before anything would happen. Was also sluggish switching back and forth between a V8 and V4.

Government requirements have ruined new vehicles.
Click to expand...
You must’ve gotten a defective rental. I’ve experienced none of that in 4 or 5 new 1/2 ton Silverados, 6,8 or 10 speed. 5.3 or Dmax.
 
Grit dog

Grit dog

Full Access Member
Joined
May 18, 2020
Posts
6,980
Reaction score
12,233
Location
Auburn, Washington
First Name
Todd
Truck Year
1986, 1977
Truck Model
K20, C10
Engine Size
454, 350
Derick C. said:
My 22 gmc is just as tall as my burb and the burb has a 6 inch lift and 35's... lol
Click to expand...
It’s great that we finally get the trucks we used to have to “build”.
But can never make everyone happy. Complain it’s too small complain it’s too big. More truth in the Goldilocks table than one might have ever thought.
Perspective, 5” lift on 35s vs leveled 1/2 ton Trailboss.
You must be registered for see images attach
 
fast 99

fast 99

Full Access Member
Joined
Dec 31, 2021
Posts
2,029
Reaction score
2,938
Location
Spokane, Washington
First Name
Brian
Truck Year
81,85
Truck Model
K20
Engine Size
350
Grit dog said:
You must’ve gotten a defective rental. I’ve experienced none of that in 4 or 5 new 1/2 ton Silverados, 6,8 or 10 speed. 5.3 or Dmax.
Click to expand...
Yeah, that's possible. Rentals are usually not treated the same as owned. Doesn't GM have issues with torque convertors shedding metal requiring tranny o-hauls? May be that was the problem with it.

Don't get me wrong, I have been a GM truck fan for a long........... long time. In our business we got the best service out of them. MUCH better than Dodge, slightly better than Ford.
 
Grit dog

Grit dog

Full Access Member
Joined
May 18, 2020
Posts
6,980
Reaction score
12,233
Location
Auburn, Washington
First Name
Todd
Truck Year
1986, 1977
Truck Model
K20, C10
Engine Size
454, 350
fast 99 said:
Yeah, that's possible. Rentals are usually not treated the same as owned. Doesn't GM have issues with torque convertors shedding metal requiring tranny o-hauls? May be that was the problem with it.

Don't get me wrong, I have been a GM truck fan for a long........... long time. In our business we got the best service out of them. MUCH better than Dodge, slightly better than Ford.
Click to expand...
It was a tongue in cheek response. Since every Silverado has over 300hp and a crisp shifting 10speed. There ain’t a slug in the bunch.
And the trans is the same as the F150s, both mfgs been using them for 4-5 years now with relatively few issues.
Actually it must have been defective. Or did you feel the slight turbo lag of the 4 banger?
 
bucket

bucket

Super Moderator
Staff member
Super Moderator
Joined
Aug 3, 2010
Posts
30,446
Reaction score
28,356
Location
Usually not in Ohio
First Name
Andy
Truck Year
'77, '78, '79, '84, '88
Truck Model
K5 thru K30
Engine Size
350-454
DoubleDingo said:
That's quite the psycho dellick rim you have there in the one pic
Click to expand...

squaredeal91 said:
I noticed that too lol. I'd put those on "something" lol
Click to expand...

That's a mid 80's Monte Carlo LS factory aluminum wheel. I've always liked them. I have a set of them.... that I'll, uh..... use on something one day. Lol.
 
You must log in or register to reply here.

Similar threads

crazy4offroad
New truck/SXS
Replies
4
Views
457
crazy4offroad
crazy4offroad
Craig Nedrow
International Dump truck
Replies
5
Views
574
Craig Nedrow
Craig Nedrow
R
Tire size confusion.
2
Replies
16
Views
787
Dooley
Dooley
Jawzjeep
About to get my first cummins truck.
2
Replies
26
Views
2K
squaredeal91
squaredeal91
Jacksonrobinson
General Bolt Size Master List
Replies
5
Views
507
ali_c20
ali_c20

Latest posts

Forum statistics

Threads
44,175
Posts
950,931
Members
36,300
Latest member
BigMike88
Top