First post with Questions

Disclaimer: Links on this page pointing to Amazon, eBay and other sites may include affiliate code. If you click them and make a purchase, we may earn a small commission.

Grit dog

Grit dog

Full Access Member
Joined
May 18, 2020
Posts
6,623
Reaction score
11,424
Location
Auburn, Washington
First Name
Todd
Truck Year
1986, 1977
Truck Model
K20, C10
Engine Size
454, 350
If it doesn’t have a few squeaks or strange noises it means something is probably not working!
But yeah idk what it could be.
Your front suspension, is it soft or is it just really low clearance to the fender wells? Bump stops in and engaging before it bottoms out?
Are the shocks blown? Shocks shouldn’t be keeping it from bottoming out per se though. But they’d let it bounce over a speed bump and if the clearance is real tight, that could be part of your issue.

Just a couple things to look at.
 
B

bbfishey

Junior Member
Joined
Aug 9, 2024
Posts
10
Reaction score
4
Location
Mississippi
First Name
Brent
Truck Year
1987
Truck Model
Chevrolet
Engine Size
350
Grit dog said:
If it doesn’t have a few squeaks or strange noises it means something is probably not working!
But yeah idk what it could be.
Your front suspension, is it soft or is it just really low clearance to the fender wells? Bump stops in and engaging before it bottoms out?
Are the shocks blown? Shocks shouldn’t be keeping it from bottoming out per se though. But they’d let it bounce over a speed bump and if the clearance is real tight, that could be part of your issue.

Just a couple things to look at.
Click to expand...
It's real soft, like the springs and shocks are blown. The steering feels a little squishy as well, but its got new components down the tree.
 
mxer147

mxer147

83 K20, 350 vortec, 465, 208, 14/10, 4.10, 33s
Joined
Feb 8, 2023
Posts
564
Reaction score
1,987
Location
Colorado
First Name
Jack
Truck Year
1983
Truck Model
k20
Engine Size
350
Exhaust rubbing from a loose or improperly placed hanger will result in a squeak, depending where it’s at it will resonate into the cab. You could also increase the radio volume and keep the windows down to drown out the squeak, that’s the if it’s not broken don’t fix it theory. Nice looking truck!
 
Grit dog

Grit dog

Full Access Member
Joined
May 18, 2020
Posts
6,623
Reaction score
11,424
Location
Auburn, Washington
First Name
Todd
Truck Year
1986, 1977
Truck Model
K20, C10
Engine Size
454, 350
bbfishey said:
It's real soft, like the springs and shocks are blown. The steering feels a little squishy as well, but its got new components down the tree.
Click to expand...
If the shocks are blown it will bounce 2-3-4 times after a bump. Easy to diagnose.
 
B

bbfishey

Junior Member
Joined
Aug 9, 2024
Posts
10
Reaction score
4
Location
Mississippi
First Name
Brent
Truck Year
1987
Truck Model
Chevrolet
Engine Size
350
After trying all the suggestions offered I believe I've narrowed it down to the dash. It squeaks constantly at a low tone until I press down on the center of the dash near the windshield. The dash appears to be mounted securely though there may be loose bolts underneath. I guess my next step is to crawl up under it and see if I can find loose or missing bolts/screws.
 
84c10Tony

84c10Tony

Howdy!
Joined
Apr 14, 2017
Posts
153
Reaction score
132
Location
In, but not from So Cal
First Name
Tony
Truck Year
Was 84
Truck Model
01 Sienna
Engine Size
3.0
Welcome to the forum, loose screw an all! My old 84 was like that and had to tighten up panel screws, it would go away for a while. Replace your shocks, or up it a bit, either way, it will give you ______ till you ______ the ______then bing up on the axelz....and don't spel it like that. Have fun, welcome to the nut house.
 
mattsk8

mattsk8

Full Access Member
Joined
Jun 5, 2024
Posts
169
Reaction score
420
Location
Michigan
First Name
Matt
Truck Year
1986
Truck Model
K20
Engine Size
350
bbfishey said:
After trying all the suggestions offered I believe I've narrowed it down to the dash. It squeaks constantly at a low tone until I press down on the center of the dash near the windshield. The dash appears to be mounted securely though there may be loose bolts underneath. I guess my next step is to crawl up under it and see if I can find loose or missing bolts/screws.
Click to expand...
I'd pull the dash pad and check where everything mounts. Take it for a drive with the dash pad removed and see if the squeak is gone. If it is gone, figure out how to tighten the point of contact where the pad is squeaking, or use some sort of adhesive gasket or strip caulk at the point that it's squeaking. Issues like this are a process of elimination, just keep taking it apart and wiggling things until you find your squeak.
 
B

bbfishey

Junior Member
Joined
Aug 9, 2024
Posts
10
Reaction score
4
Location
Mississippi
First Name
Brent
Truck Year
1987
Truck Model
Chevrolet
Engine Size
350
Good morning all!

I found my squeak. It was in the dash. There is a support rod that runs from the outside edge of the under-dash, through the firewall into the engine-bay. This support rod had lost the nut on the end of it and was allowing the dash to shake when idling or moving. I replaced the nut, adding a lock washer, and BAM, problem solved.

I can't believe it was so easy. Bettye White-truck 0, owner 1!

Thanks for all the ideas and support!
 
You must log in or register to reply here.

Similar threads

G
Bulb and ignition switch questions
Replies
2
Views
898
germando
G
C
Help with grinding/whirring sound!
Replies
9
Views
412
tsgs84
tsgs84
G
General Motor Swap Questions
Replies
5
Views
586
YakkoWarner
Y
creich68
91 Burban Radio Restoration - Static Gone!
Replies
5
Views
1K
Craig Nedrow
Craig Nedrow
Kowboy
Few questions
Replies
7
Views
872
Bullet Bob
Bullet Bob

Latest posts

Forum statistics

Threads
43,549
Posts
937,834
Members
35,449
Latest member
Max Headroom
Top