Help with a possible transmission issue

Disclaimer: Links on this page pointing to Amazon, eBay and other sites may include affiliate code. If you click them and make a purchase, we may earn a small commission.

F

FishingJake

Junior Member
Joined
Aug 19, 2024
Posts
9
Reaction score
1
Location
Rootstown Ohio
First Name
Rich
Truck Year
1986
Truck Model
c10
Engine Size
305
Hello,

I’m my son 16 was driving his truck to work today. Finally paid it off… and said it was “revving” high. Made it about a mile to work then said it would not move. I checked and fluid was very low . I added 3 quarts and checked the level and it’s good on fluid. However the truck will only go in reverse now. We’re complete amateur mechanics. Just looking for help and advice to get the kid back on the road he worked his butt off to get a square body. Thanks I’m advance. From the looks of things I found a good group to help us out.
 

Attachments

  • A0A68F78-289D-481A-8C02-C27DF06E74C1.jpeg
    A0A68F78-289D-481A-8C02-C27DF06E74C1.jpeg
    217.1 KB · Views: 36
DoubleDingo

DoubleDingo

Full Access Member
Joined
Jul 3, 2012
Posts
11,235
Reaction score
17,099
Location
Right where I am
First Name
Bagoomba
Truck Year
1981
Truck Model
81-C20 Silverado Camper Special-TH400-4.10s
Engine Size
Carb'ed Vortec 350
If it was running three quarts low and revving the engine yielded slow speed, I'd have to lean towards a rebuild of the transmission. What transmission is in the truck? TH350, TH400, 700R4?

@NickTransmissions @Matt69olds @HotRodPC @Ricko1966

What are you thoughts on this one?
 
F

FishingJake

Junior Member
Joined
Aug 19, 2024
Posts
9
Reaction score
1
Location
Rootstown Ohio
First Name
Rich
Truck Year
1986
Truck Model
c10
Engine Size
305
DoubleDingo

DoubleDingo

Full Access Member
Joined
Jul 3, 2012
Posts
11,235
Reaction score
17,099
Location
Right where I am
First Name
Bagoomba
Truck Year
1981
Truck Model
81-C20 Silverado Camper Special-TH400-4.10s
Engine Size
Carb'ed Vortec 350
FishingJake said:
Thanks I will have to try to figure out what kind of transmission
Click to expand...
Look at the pan. Compare to this chart of pan shapes.

You must be registered for see images attach
 
R

Ricko1966

Full Access Member
Joined
Apr 11, 2017
Posts
5,390
Reaction score
8,600
Location
kansas
First Name
Rick
Truck Year
1975
Truck Model
c20
Engine Size
350
FishingJake said:
Hello,

I’m my son 16 was driving his truck to work today. Finally paid it off… and said it was “revving” high. Made it about a mile to work then said it would not move. I checked and fluid was very low . I added 3 quarts and checked the level and it’s good on fluid. However the truck will only go in reverse now. We’re complete amateur mechanics. Just looking for help and advice to get the kid back on the road he worked his butt off to get a square body. Thanks I’m advance. From the looks of things I found a good group to help us out.
Click to expand...
Start the truck foot on brake go through all the gears and back to park. Engine idling and truck on level ground,check your transmission fluid it needs to be between the marks. If it's between the marks I'd say transmission rebuild. Not between the marks, add fluid and check again,see if it drives okay. What transmission? Th350 or Th400 pull the hose off at the vacuum modulator see if it full of fluid.
 
NickTransmissions

NickTransmissions

Supporting Member
Supporting Member
Joined
Aug 3, 2023
Posts
408
Reaction score
842
Location
Las Vegas
First Name
Nick
Truck Year
1987
Truck Model
R10
Engine Size
350
FishingJake said:
Hello,

I’m my son 16 was driving his truck to work today. Finally paid it off… and said it was “revving” high. Made it about a mile to work then said it would not move. I checked and fluid was very low . I added 3 quarts and checked the level and it’s good on fluid. However the truck will only go in reverse now. We’re complete amateur mechanics. Just looking for help and advice to get the kid back on the road he worked his butt off to get a square body. Thanks I’m advance. From the looks of things I found a good group to help us out.
Click to expand...
Sound like forward clutch has burnt (or possible low roller one-way assembly failure), assuming you have the correct amount of fluid in the system. This is true regardless of what transmission is installed as they're all designed (and function) more or less the same way when it comes to the forward clutch.
 
F

FishingJake

Junior Member
Joined
Aug 19, 2024
Posts
9
Reaction score
1
Location
Rootstown Ohio
First Name
Rich
Truck Year
1986
Truck Model
c10
Engine Size
305
Hi it’s this one . Now I’m under it I see it’s been leaking pretty good.
 
F

FishingJake

Junior Member
Joined
Aug 19, 2024
Posts
9
Reaction score
1
Location
Rootstown Ohio
First Name
Rich
Truck Year
1986
Truck Model
c10
Engine Size
305
Ricko1966 said:
Start the truck foot on brake go through all the gears and back to park. Engine idling and truck on level ground,check your transmission fluid it needs to be between the marks. If it's between the marks I'd say transmission rebuild. Not between the marks, add fluid and check again,see if it drives okay. What transmission? Th350 or Th400 pull the hose off at the vacuum modulator see if it full of fluid.
Click to expand...
TH350
 
F

FishingJake

Junior Member
Joined
Aug 19, 2024
Posts
9
Reaction score
1
Location
Rootstown Ohio
First Name
Rich
Truck Year
1986
Truck Model
c10
Engine Size
305
Ricko1966 said:
Start the truck foot on brake go through all the gears and back to park. Engine idling and truck on level ground,check your transmission fluid it needs to be between the marks. If it's between the marks I'd say transmission rebuild. Not between the marks, add fluid and check again,see if it drives okay. What transmission? Th350 or Th400 pull the hose off at the vacuum modulator see if it full of fluid.
Click to expand...
I did this fluid stayed in the marks. Still won’t go into D , D1 or D2. It’s a Th350.
 
Bextreme04

Bextreme04

Full Access Member
Joined
May 13, 2019
Posts
4,439
Reaction score
5,574
Location
Oregon
First Name
Eric
Truck Year
1980
Truck Model
K25
Engine Size
350-4bbl
FishingJake said:
TH350
Click to expand...
wow, I would not have expected that. 86' was the last year you could get a TH350 and it was only available as the TH350-C model with a lockup converter and even then only available as an option in the Vans and Trucks. I would have expected a 700R4, but they aren't easy to mistake for each other.

Like others have said, you likely burnt up the forward clutches by running it low on fluid. They are pretty easy to rebuild yourself and I wouldn't expect them to cost much to have a local shop rebuild for you if you don't have the time or feel comfortable doing it yourself. If you have a bunch of metal in the pan, you will likely need a fresh converter too.
 
R

Ricko1966

Full Access Member
Joined
Apr 11, 2017
Posts
5,390
Reaction score
8,600
Location
kansas
First Name
Rick
Truck Year
1975
Truck Model
c20
Engine Size
350
FishingJake said:
I did this fluid stayed in the marks. Still won’t go into D , D1 or D2. It’s a Th350.
Click to expand...
Yep you need a transmission.If you are mechanically inclined a Th350 isn't a tough one.
 
F

FishingJake

Junior Member
Joined
Aug 19, 2024
Posts
9
Reaction score
1
Location
Rootstown Ohio
First Name
Rich
Truck Year
1986
Truck Model
c10
Engine Size
305
Ricko1966 said:
Yep you need a transmission.If you are mechanically inclined a Th350 isn't a tough one.
Click to expand...
Man that stinks looks like he is going go mowing a bunch more lawns and bussing of tables. I imagine it’s not going to be cheap.
 
Matt69olds

Matt69olds

Full Access Member
Joined
Jan 8, 2018
Posts
2,447
Reaction score
3,816
Location
Central Indiana
First Name
Matt
Truck Year
81
Truck Model
GMC 1/2 ton
Engine Size
455 Olds
A TH350 is the perfect beginner transmission. It’s easy to build, doesn’t require much in special tools, and what special tools are needed is easy to fabricate.

Watch some YouTube videos before deciding if it’s something you want to attempt. Have a large clean work area, lots of bags to label parts, and take lots of pictures and notes.

The worst part about building 350 transmission is parts are getting scarce. There was a time you almost couldn’t give away Th350s, now people are paying a couple hundred bucks for good pumps. This might be a situation where a 700 swap might be cheaper.
 
Bextreme04

Bextreme04

Full Access Member
Joined
May 13, 2019
Posts
4,439
Reaction score
5,574
Location
Oregon
First Name
Eric
Truck Year
1980
Truck Model
K25
Engine Size
350-4bbl
FishingJake said:
Man that stinks looks like he is going go mowing a bunch more lawns and bussing of tables. I imagine it’s not going to be cheap.
Click to expand...
Its about $200 for a full rebuild kit, just make sure it is for a 350C not just a 350. You can probably also just roll the dice and see what can be found on facebook marketplace or in the local pick n' pull. If you drop the pan and the fluid is burnt and dark, but no metal shavings, you can probably just get away with a quick pull apart, clean, and rebuild.
 
You must log in or register to reply here.

Similar threads

A
Advice on Transmission Fluid Change for 1980 C10
2
Replies
17
Views
650
Turbo4whl
Turbo4whl
Nasty-LSX
Help me solve a cooling issue. Pic's inside.
2
Replies
15
Views
1K
Nasty-LSX
Nasty-LSX
T
Need help with my 700r4
Replies
2
Views
509
NickTransmissions
NickTransmissions
V
Carb help? (With pictures)
Replies
2
Views
188
Vann
V
G
A833 transmission
Replies
11
Views
712
rpcraft
rpcraft

Latest posts

Forum statistics

Threads
44,098
Posts
949,290
Members
36,193
Latest member
BradleyM
Top