Sputter/stall when driving

Disclaimer: Links on this page pointing to Amazon, eBay and other sites may include affiliate code. If you click them and make a purchase, we may earn a small commission.

parkerc30

Junior Member
Joined
Aug 13, 2024
Posts
6
Reaction score
1
Location
arizona
First Name
parker
Truck Year
1985
Truck Model
c30
Engine Size
350
My 1985 c30 with a small block 350 is sputtering/stalling when driving. It was worse then I replaced the fuel filter with a less restrictive one. The stalling isn’t as bad now but I was wondering if it could be the electrical system. It used to stall completely when I would stop and try to go again. But now it doesn’t do that anymore. On my test drive it only did this once but it sputtered when accelerating. I hear a click sound and it fires right up again on its own and continues. I do have a video but I don’t know how to attach it.
 

PrairieDrifter

Full Access Member
Joined
Dec 28, 2014
Posts
3,817
Reaction score
5,560
Location
North Dakota
First Name
Mason
Truck Year
84,79,77,76,70,48
Truck Model
Suburban k10, bonanza k10, k30, k20, c10, gmc 1/2ton
Engine Size
350, 350, 350, 350, 350, 350
What's the story on the fuel pump?
 

parkerc30

Junior Member
Joined
Aug 13, 2024
Posts
6
Reaction score
1
Location
arizona
First Name
parker
Truck Year
1985
Truck Model
c30
Engine Size
350
New fuel pump, sending unit. and tank. Less than 50 miles on them
 
Last edited:

Snoots

Full Access Member
Joined
Jan 23, 2013
Posts
8,635
Reaction score
17,660
Location
Georgia
First Name
Roger
Truck Year
1973
Truck Model
Jimmy Sierra
Engine Size
350 w/203
Stuck EGR Valve?
 

PrairieDrifter

Full Access Member
Joined
Dec 28, 2014
Posts
3,817
Reaction score
5,560
Location
North Dakota
First Name
Mason
Truck Year
84,79,77,76,70,48
Truck Model
Suburban k10, bonanza k10, k30, k20, c10, gmc 1/2ton
Engine Size
350, 350, 350, 350, 350, 350

Ricko1966

Full Access Member
Joined
Apr 11, 2017
Posts
5,296
Reaction score
8,424
Location
kansas
First Name
Rick
Truck Year
1975
Truck Model
c20
Engine Size
350
Before you replace any more parts. Check your basics,vacuum hose routing and condition. Make sure the vacuum advance cannister is functioning. Check timing. Inspect cap,plugs,and wires.
 

parkerc30

Junior Member
Joined
Aug 13, 2024
Posts
6
Reaction score
1
Location
arizona
First Name
parker
Truck Year
1985
Truck Model
c30
Engine Size
350
I didn’t think about checking the timing I’ll check it when I get a chance thank you!
 

Ricko1966

Full Access Member
Joined
Apr 11, 2017
Posts
5,296
Reaction score
8,424
Location
kansas
First Name
Rick
Truck Year
1975
Truck Model
c20
Engine Size
350
I didn’t think about checking the timing I’ll check it when I get a chance thank you!
And the the vacuum advance,make sure the diaphragm is not ruptured
 
Last edited:

JD1973

Junior Member
Joined
Oct 4, 2017
Posts
20
Reaction score
9
Location
AZ
First Name
Jonathan
Truck Year
1973
Truck Model
Chevy 1/2 stepside
Engine Size
383
what is the temperature outside while driving, could be a vaper lock situation, I've been dealing with that here in AZ. I'm in the process of adding a vaper release filter
 

parkerc30

Junior Member
Joined
Aug 13, 2024
Posts
6
Reaction score
1
Location
arizona
First Name
parker
Truck Year
1985
Truck Model
c30
Engine Size
350
Checked the vacuum hoses and all that and everything is good, I’m in AZ as well but i usually drive it in the evening and then it’s about 80 degrees give or take. At the moment i have a rubber fuel line from pump to carburetor. My buddy used to have the same problem then switched to a shorter run hard line. Could that be a solution.
 

Latest posts

Forum statistics

Threads
43,895
Posts
945,197
Members
35,933
Latest member
js3572
Top