Rear disc conversion

Disclaimer: Links on this page pointing to Amazon, eBay and other sites may include affiliate code. If you click them and make a purchase, we may earn a small commission.

gerhed

gerhed

Full Access Member
Joined
Jul 7, 2024
Posts
62
Reaction score
163
Location
Kentucky
First Name
Jason
Truck Year
1983
Truck Model
K20
Engine Size
350
So I have a 1983 K20 with the semi float rear axle. I want to convert it to a disc set up and was wondering if the same setup that works on a full floater will work on a semi float. The adapter plates are about $50 on Amazon, and I've watched some videos of people using the front rotors and calipers from same year, and it looks like that once the adapter plate is on, everything else but the line fabrication is a bolt on. What I can't seem to find is a video of somebody doing this on a semi float rear diff.

Anybody know about this can maybe shine a little light my way?
 
Grit dog

Grit dog

Full Access Member
Joined
May 18, 2020
Posts
6,966
Reaction score
12,215
Location
Auburn, Washington
First Name
Todd
Truck Year
1986, 1977
Truck Model
K20, C10
Engine Size
454, 350
If you’re up against rebuilding and replacing everything on the rear brakes including drums, then maybe it’s the right time to convert. Similar cost magnitude.
Or if you plan on daily driving it through a couple sets of brake pads like you’re gonna pile on 150k miles in the next 5 years. I’d think about it.
But if all u need is shoes wheel Cylinders and maybe a hardware kit, drums are hard to beat and if they are in new condition they will last a long time and stop very well.
JMO. Sorry I didn’t answer your question. I don’t know that answer.
 
gerhed

gerhed

Full Access Member
Joined
Jul 7, 2024
Posts
62
Reaction score
163
Location
Kentucky
First Name
Jason
Truck Year
1983
Truck Model
K20
Engine Size
350
Grit dog said:
If you’re up against rebuilding and replacing everything on the rear brakes including drums, then maybe it’s the right time to convert. Similar cost magnitude.
Or if you plan on daily driving it through a couple sets of brake pads like you’re gonna pile on 150k miles in the next 5 years. I’d think about it.
But if all u need is shoes wheel Cylinders and maybe a hardware kit, drums are hard to beat and if they are in new condition they will last a long time and stop very well.
JMO. Sorry I didn’t answer your question. I don’t know that answer.
Click to expand...
Nah, you answered just fine. I only put 4-5,000 miles a year on my work truck, which is what this will be, so, I think I'll just keep the drums.

Very convincing argument, thanks.
 
WFO

WFO

Full Access Member
Joined
Jan 6, 2017
Posts
3,688
Reaction score
5,028
Location
Texas Panhandle
First Name
Dan
Truck Year
1986
Truck Model
K20
Engine Size
350
gerhed said:
Nah, you answered just fine. I only put 4-5,000 miles a year on my work truck, which is what this will be, so, I think I'll just keep the drums.

Very convincing argument, thanks.
Click to expand...
Good plan, especially since the front brakes do most of the work.
 
J

JBswth

Full Access Member
Joined
Jan 24, 2022
Posts
225
Reaction score
182
Location
Vallejo, California
First Name
James
Truck Year
1973
Truck Model
C25
Engine Size
292 cubic inches
gerhed said:
So I have a 1983 K20 with the semi float rear axle. I want to convert it to a disc set up and was wondering if the same setup that works on a full floater will work on a semi float. The adapter plates are about $50 on Amazon, and I've watched some videos of people using the front rotors and calipers from same year, and it looks like that once the adapter plate is on, everything else but the line fabrication is a bolt on. What I can't seem to find is a video of somebody doing this on a semi float rear diff.

Anybody know about this can maybe shine a little light my way?
Click to expand...
I would, instead, switch to a 14 bolt Full Floating rear end with 13 inch brakes. More bang for the buck.

J. B.
 
B

Bennyt

Full Access Member
Joined
May 17, 2019
Posts
1,201
Reaction score
1,850
Location
Surprise
First Name
Ben
Truck Year
1977
Truck Model
C10
Engine Size
350
Rickf said:
The kits I've seen use mid 80's Eldorado/Toranado front calipers.
Click to expand...
I've done 2-3 14BFF rear disc conversions and those calipers don't hold very well. I think the pedal/ lever needs more travel. I used a ratcheting lever on one and it was better. If I ever use Eldo calipers again, which I won't, I think the trick would be to use an e-stopp to pull it up tight.

Rear disc conversions aren't really worth it unless you are spending big money and racing. Rear drums work well and are reliable. If 30-40% of your braking occurs in the rear and a disc conversion improves it by 10-20%, you see less than a 10% improvement overall. Put the same money into larger drums in rear and better front calipers up front and you'll be way ahead
 
Craig Nedrow

Craig Nedrow

NADAR UNDER THE RADAR
Supporting Member
Joined
Sep 1, 2018
Posts
1,036
Reaction score
2,182
Location
Washington State
First Name
Craig
Truck Year
1973 (have two), 1985
Truck Model
K10, K20, C20
Engine Size
350, 454, 6.2 Detroit
FYI the 14 bolt has several different drum sizes 11, 13, and at least two width sizes, 2.5 and 3" I think.....Bigger is better
 
You must log in or register to reply here.

Similar threads

M
Backing plates
Replies
4
Views
228
Ricko1966
R
S
No line pressure to rear disc conversion, no prop valve
2
Replies
18
Views
1K
sctaylor
S
M
ISO 73-83 13” brakes backing plates
Replies
0
Views
94
mummertj
M
S
Rear disc conversion with hydroboost system
Replies
13
Views
3K
wlwarnke
wlwarnke
farm truck
Front Disc Brake Conversion - Alignment Specification Chart?
Replies
2
Views
561
farm truck
farm truck

Latest posts

Forum statistics

Threads
44,149
Posts
950,365
Members
36,260
Latest member
Delirius63
Top