Bench Seat Too Far Forward?

Disclaimer: Links on this page pointing to Amazon, eBay and other sites may include affiliate code. If you click them and make a purchase, we may earn a small commission.

84 Silverado

84 Silverado

Junior Member
Joined
Jan 10, 2023
Posts
22
Reaction score
23
Location
Dallas
First Name
Tod
Truck Year
1984
Truck Model
Silverado 1500
Engine Size
350
Gents,
I tore my interior down to the metal and took about a year to get it all back together. When the seat was out, I cleaned up all the tracks and bearings so that I would adjust easily. After installing my bench seat (84' Silverado) I found that its so close to the steering wheel that I can barely fit in. I'm hopeing that I just missed something and there is an easy fix for this. With the seat all the way back, there is 3"1/4" inchs between the seat and the back of the cab. Is this normal?
See pics.

Thanks in advance!
 

Attachments

  • IMG_4361.jpg
    IMG_4361.jpg
    178.9 KB · Views: 54
  • IMG_4362.jpg
    IMG_4362.jpg
    123.2 KB · Views: 52
TotalyHucked

TotalyHucked

Full Access Member
Joined
Feb 24, 2020
Posts
3,791
Reaction score
12,273
Location
Auburn, Georgia
First Name
Zach
Truck Year
1985
Truck Model
Sierra 1500
Engine Size
5.3
Yeah that's too far forward. Mine touched the back wall when it was all the way back. Might double check that something's not bound up or bent or you don't have some kind of obstruction
 
FireTruck1984

FireTruck1984

Full Access Member
Joined
Jan 7, 2019
Posts
2,988
Reaction score
9,946
Location
Michigan
First Name
Ted
Truck Year
1984 and 1984
Truck Model
High Sierra K1500 350. Sierra Classic C1500 305.
Engine Size
350, 305
TotalyHucked said:
Yeah that's too far forward. Mine touched the back wall when it was all the way back. Might double check that something's not bound up or bent or you don't have some kind of obstruction
Click to expand...
Yes, like Zach says, that’s not right. Be sure you bolted the tracks in the right spot on the seat. I’ve done 3 interiors, 2 ‘84s & 1 ‘85 and didn’t have that issue. Be sure your release has full motion. The seat back should touch the rear with full range of motion.
You must be registered for see images attach
 
Last edited:
Grit dog

Grit dog

Full Access Member
Joined
May 18, 2020
Posts
7,109
Reaction score
12,542
Location
Auburn, Washington
First Name
Todd
Truck Year
1986, 1977
Truck Model
K20, C10
Engine Size
454, 350
X3. Seat back will touch or almost touch the back of the cab.
Could be an illusion but the seat bottom looks awful close to the steering wheel and/or the seat bottom is tilted up in front.
 
84 Silverado

84 Silverado

Junior Member
Joined
Jan 10, 2023
Posts
22
Reaction score
23
Location
Dallas
First Name
Tod
Truck Year
1984
Truck Model
Silverado 1500
Engine Size
350
I took some time and enjoyed a couple of wobble pops and found the issue. The new seat belts I installed are Retro-Belt units and I insalled them as per the directions. As you can see in the pic, the 90 degree bracket stands up quite a bit. This is what was hitting the seat frame--keeping it from going all the way back. I removed the 90 degree bracket, bolted the seat belt to the floor pan with out it and bam! Problem fixed. See pics.
So all you fellas and fellets that are using Retro Belts brand seat belts with a stock bench seat, bolt the seat belts down, flat on the floor pan, and don't use the angle brackets.

Thanks agian.
 

Attachments

  • Fixed1.jpg
    Fixed1.jpg
    197.8 KB · Views: 52
  • Fixed2.jpg
    Fixed2.jpg
    170.3 KB · Views: 52
  • IMG_4367.jpg
    IMG_4367.jpg
    153.1 KB · Views: 53
FireTruck1984

FireTruck1984

Full Access Member
Joined
Jan 7, 2019
Posts
2,988
Reaction score
9,946
Location
Michigan
First Name
Ted
Truck Year
1984 and 1984
Truck Model
High Sierra K1500 350. Sierra Classic C1500 305.
Engine Size
350, 305
84 Silverado said:
I took some time and enjoyed a couple of wobble pops and found the issue. The new seat belts I installed are Retro-Belt units and I insalled them as per the directions. As you can see in the pic, the 90 degree bracket stands up quite a bit. This is what was hitting the seat frame--keeping it from going all the way back. I removed the 90 degree bracket, bolted the seat belt to the floor pan with out it and bam! Problem fixed. See pics.
So all you fellas and fellets that are using Retro Belts brand seat belts with a stock bench seat, bolt the seat belts down, flat on the floor pan, and don't use the angle brackets.

Thanks agian.
Click to expand...
Nice! Happy to see you solved the issue. BTW those 90 degree brackets are for the retractors, not the Belts.
 
Craig Nedrow

Craig Nedrow

NADAR UNDER THE RADAR
Joined
Sep 1, 2018
Posts
1,111
Reaction score
2,402
Location
Washington State
First Name
Craig
Truck Year
1973 (have two), 1985
Truck Model
K10, K20, C20
Engine Size
350, 454, 6.2 Detroit
Oldbear42

Oldbear42

Supporting Member
Supporting Member
Joined
Feb 15, 2024
Posts
197
Reaction score
510
Location
Linden, Alberta, Canada
First Name
Shaine
Truck Year
1981
Truck Model
C20 LWB Scottsdale
Engine Size
350
Bennyt said:
I have the same issue.
These guys can probably help...

Login

www.24hourfitness.com www.24hourfitness.com
Click to expand...
It was cheaper and quicker to install a shallow dish steering wheel and build custom mounts to move my seat back.
 

Attachments

  • IMG_9106.JPG
    IMG_9106.JPG
    205.2 KB · Views: 35
You must log in or register to reply here.

Similar threads

P
Measurements for bench seat console.
Replies
0
Views
241
Popa O
P
CopperLB81
Help me understand.. Lowered bench seat bracket
Replies
2
Views
931
TotalyHucked
TotalyHucked
Stormhawk
Bench Seat Tracks
Replies
5
Views
312
vr1967
V
JM in KY
Bench seat latch
Replies
5
Views
2K
JM in KY
JM in KY
Chris64
Seat Rebuild - To reuse or not reuse padding. And fixed to folding?
Replies
13
Views
2K
Turbo4whl
Turbo4whl

Latest posts

Forum statistics

Threads
44,426
Posts
957,679
Members
36,792
Latest member
mikeymch
Top