Tonimus's latest activity
-
Tonimus replied to the thread BBC 396 wil not idle with any carb.A smoke machine will do it. -
Tonimus replied to the thread 454 V Belt Sizes.The alternator belt should also go around the crank.
-
Tonimus replied to the thread 454 V Belt Sizes.My '78 C10 Suburban 454 without air/smog pump uses three belts. AC (which also goes around the PS) is a 15580. The other two are both...
-
Tonimus replied to the thread Gas in Oil!?.No, it had to be loaded up. 3k rpm in neutral wouldn’t do anything. Engine runs great. Has a properly functioning PCV system too.
-
Tonimus replied to the thread FS Door Locks.Two B keys and a H key. All three keys work.
-
Tonimus replied to the thread TH400 Yoke Bolt Came Out.I kept the original washer. It's in serviceable condition.
-
Tonimus replied to the thread 74 C10 rear end interchange.If you're going like for like axle and doing the whole axle, I believe all the square body rear ends are set up the same.
-
Tonimus replied to the thread Gas in Oil!?.My fuel pump was leaking oil like crazy out of the weep hole. Any time I'd load up the engine over 2500 rpm, it would spew oil all over...
-
Tonimus replied to the thread FS Door Locks.Sure looks like it. I can verify when I get home late tonight. Not too knowledgeable about key letter codes.
-
Tonimus replied to the thread TH400 Yoke Bolt Came Out.I've got the housing, grade 8 bolt, and some blue loctite. Probably get to it sometime this week. Wish I didn't have to move the center...
-
Tonimus replied to the thread FS Door Locks.I was just going to toss them in the garbage. Figured if someone here needed a set cheap, I'd put them up.
-
Tonimus replied to the thread What have you done to your square lately??.Tightened the valve covers, new 94 amp 12SI alternator, all new v-belts, new headlight adjusters, aimed the new LED headlights.
-
-
Tonimus replied to the thread Which aftermarket LED headlights?.
-
-
Tonimus replied to the thread CA Smog exemption.What company is this?! I didn't find one that would let me tow ever with it!
-
Tonimus replied to the thread Wiring Harness? Choosing one?.If most of the connectors are good or you can be replaced with something else you have on hand, you could use one of the universal kits...
