Stormhawk's latest activity
-
Stormhawk replied to the thread Choke Issues.So more on this. I went out this morning after the truck had sat outside overnight. It was about 30 degrees out, so not terribly cold... -
Think an 83 would have both a primary and secondary pull off. 3/16" gap on the choke plate is a good starting point for pull off...
-
That could possibly hide a bad choke pull off. The pull offs job is to pull the choke plate open as soon as there is vacuum.
-
Make sure non of your linkage is binding. Check that the choke pull off is connected and working. Make sure the diaphragm on the pull...
-
Make sure your float isn't sticking, or maybe somehow the needle and seat are worn. There is a fine line with those choke adjustments...
-
So starting about a week ago my truck (83 K20 350/TH400) has been having severe cold starting issues. It will literally not stay...
-
Stormhawk replied to the thread Bench Seat Tracks.Definitely. I was able to cobble the damaged track back together with a piece of scrap metal, but the entire assembly is bent slightly...
-
I may have a set of tracks. Will look when I get home from work in the morning, if you are interested.
-
Stormhawk replied to the thread Bench Seat Tracks.I’m going to take the whole thing apart tomorrow and see about doing exactly that. Worst case scenario I can cut a small piece of steel...
-
I wonder how the heck that even happened? If you want to save a little money, the track could be disassembled and the broken rail...
-
so I’ve been prepping the cab on my 83’ K20 for new carpet and speaker wiring. After pulling the bench seat and the remains of the old...
-
-
Here's how I adjusted mine:
-
Stormhawk reacted to Ricko1966's post in the thread Need help identifying this metal line coming out the back of my carburetor with
Haha.
Let's leave the trannys out of this. -
Good afternoon gents, As the weather has been getting colder I’ve been doing some fine tuning of the choke on my truck and getting it...
-
-
Stormhawk replied to the thread What is this gauge?.Somebody call LMC or Classic Industries, they need to make a reproduction of this.
