squaredeal91's latest activity
-
I would have a real tire guy put a patch on the inside and glue the outside with that vulcanising glue they have. Also keep track of... -
squaredeal91 replied to the thread Tire damage.Glue it. Don't worry till it's leaking. I've seen worse. Ods are it won't ever leak
-
Much Thanks So many more parts are on the 'to get' list ... 1) Cam & lifters: Xtreme Energy 230 / 236 by Comp Cams .. 2) Timing...
-
squaredeal91 reacted to cartercarbaficion's post in the thread monojet i6 drinking gallons at idle with
Like.
see measuring it is the easy part. it went through a 3/4s of the way full 2 gallon costco milk jug that was full of fuel without any... -
squaredeal91 reacted to Frankenchevy's post in the thread New For Me 1985 Silverado 20 6.2 Diesel with Haha.
if your handle was Bextremeiv, I’d think there was some sort of conspiracy going on. @Bextreme04 is this your cousin?
-
I have a 1975 stepside I bought with a 1968 327 in it. It has 083 heads with bent intake valves. I’ve done quite a bit of research and...
-
Thank you for your replies i’m not looking for big horsepower, just something strong to pull the old truck around. There is evidence of...
-
Those are late model TPI heads. Not a fantastic head, but much better than the swirl port TBI heads of the same era, and also much...
-
Wow, that is going to be over the top, sound and look AWESOME. keep chugging!
-
More grooves ... Valve covers and the oil pan was lonely ..
-
squaredeal91 reacted to fast 99's post in the thread Radiator question for an inline 6 250 with Like.
can leave open
-
squaredeal91 reacted to Keith Seymore's post in the thread Radiator question for an inline 6 250 with Like.
I would just plug the ports and use it. That's how my GTO came. K
-
Thanks for the help folks! I replaced the fuel pump, filter, and sending unit because they were all relatively easy jobs. That helped a...
-
Fuel pressure, volume and filters. New fuel pump quality is horrible. If everything checks out [unknown what carb] possible metering rod...
-
You don't say what brand of carb you have, if its a carter, or Edelbrock, you might check float bowl level, sounds like the float level...
