Recent content by shanegtr

  1. shanegtr

    Which aftermarket LED headlights?

    I'll give another vote for Bangin Headlights. I've had a talk with George a couple of times to try and get him to make the 89 quad lights, but no luck on that one yet. At the moment its just the more common 7" and 5.75" rounds and 4x6" rectangle lights he makes.
  2. shanegtr

    New member, Australia

    Welcome from Perth - always good to see other Aussies here
  3. shanegtr

    Any Evaporator Core alternatives?

    Hi all, I need to replace the evaporator core on my burb, but as mine is a right hand drive vehicle the evaporator is on the opposite side of the car. I can grab a standard core, however the outlet where the drier bolts onto will not have a friendly curve as its designed for the opposite side of...
  4. shanegtr

    Power steering fluid .. what type ?

    I now generally use an ISO 32 hydraulic oil in all my power steering compartments across all my vehicles I own. Used to use Dex3 ATF but the hydraulic oil is cheaper here
  5. shanegtr

    1989 Jimmy led headlights

    https://genssi.com/h4701-h4703-sealed-beam-led-replacement-headlights-2-pack/
  6. shanegtr

    Reverse lights don't turn on.

    why thank you
  7. shanegtr

    Reverse lights don't turn on.

    Here's how I adjusted mine:
  8. shanegtr

    86 BIG BLOCK C10 upper radiator hose collapsing. Why?? Video inside.

    I'd pull the thermostat and check that its opening correctly. No really normal to get a low pressure area there so I'd say either a stuffed thermostat or maybe your upper hose has just gone soft and is collapsing under the slightest hint of low pressure
  9. shanegtr

    What size press (12 or 20 ton) for automotive

    While its probably rare that you'd need the extra capacity, as others have said the bigger frame size can come in handy. I've got a 12t press in my shed and I've never maxed it out for capacity, but I have run out of physical room to put some things in it
  10. shanegtr

    Options for tuning of Gen1 TBI in 2023

    I've looked into options also. Dynamic EFI looks to be my pick, reasonable price and would do the job easily for mild performance gains I would think. https://www.dynamicefi.com/ Harris chips, from what I've read maybe not as easy to change tunes. I'm sure some one out there has used them...
  11. shanegtr

    My 89

    Welcome, very nice looking burb
  12. shanegtr

    About to ruin one of the nicest C3500's with an Ls.. Pictures

    Cool looking truck. Keen to see how this turns out
  13. shanegtr

    1990 Suburban V1500 - Forum Rookie

    welcome, and awesome looking burb
  14. shanegtr

    Pissing match

    Thanks for that link to the genssi units. I reckon they could be made to look alright on the 89-91 burbs. I might try and give them a go on mine as I do need to replace a couple of my lights anyway
  15. shanegtr

    89-91 LMC headlight upgrade

    You are right, ideally the headlights will need to be for a RHD, which does complicate things somewhat. I did read on one of our local Facebook pages that someone had used 80 series landcruiser headlight buckets (the quad headlight not the single lx450/sahara one piece unit).I'll probably look...
See more

Latest posts

Forum statistics

Threads
45,105
Posts
975,452
Members
38,060
Latest member
myworrelld
Top