Ricko1966's latest activity

  • R
    Ricko1966 replied to the thread Alternator pulling battery draw.
    Is terminal 1 only hot key on engine off? And terminal 2 constant 12v hot? If so the wiring is correct.
  • R
    Ricko1966 reacted to Craig Nedrow's post in the thread Headers and O2 sensor with Like Like.
    I do have a small cam, and an E-brock airgap/ 750 Holly 1450, but the 1 7/8 headers helped. I use a Bosch and AEM A/F meter to calibrate...
  • R
    Ricko1966 replied to the thread Tv cable.
    Did you open,down load, and read the link I put in my last post? I went back through some of your previous posts,my money says you need...
  • R
    Ricko1966 reacted to bucket's post in the thread I’m pretty pissed!! with Like Like.
    Yup. It's all about lowest bidder price shopping. Not shopping for value or quality. All the questionable Chinese stuff on the market...
  • R
    Ricko1966 replied to the thread Tv cable.
    Down load and read this. Did you put a factory Qjet for a 700 r4 back on with original brackets...
  • R
    Ricko1966 reacted to Bextreme04's post in the thread Intake Manifold RTV Dry Times with Like Like.
    I was going to suggest the same thing as edelbrock. Right stuff will be ready to use in 90 minutes. Use the same process as you have for...
  • R
    Ricko1966 reacted to SirRobyn0's post in the thread Intake Manifold RTV Dry Times with Like Like.
    For me I'm good with any black or gray for use as valley seal in the manifold. But the right stuff is a cut above the regular stuff as...
  • R
    Ricko1966 replied to the thread Tv cable.
    You have to have the TV cable is about 99 percent accurate. You could go with a constant pressure valve body,more money,more trouble,not...
  • R
    Ricko1966 reacted to fast 99's post in the thread Loose timing chain replacement with Like Like.
    Hardest part will be reinstalling front cover. Will need to be modified for installation unless oil pan is removed. Corners of inner...
  • R
    Ricko1966 replied to the thread I’m pretty pissed!!.
    The bad thing is the penny pinching is the companies trying to survive with all the consumers using price as their guidelines. It seems...
  • R
    Ricko1966 reacted to Camar068's post in the thread 4:10 gears for 86 k10 with Like Like.
    When i still had 31" tires, I wish I had put 4.10 gears on it. Now I'm on 32's....really wishing I did. 4l60E in mine. You go up to...
  • R
    Ricko1966 reacted to Frankenchevy's post in the thread 4:10 gears for 86 k10 with Like Like.
    OP said k10, so 4x4. If you aren’t doing the work yourself, I’d find the shop that’s doing it first. They’ll have a supplier they like...
  • R
    Ricko1966 reacted to Craig Nedrow's post in the thread Skool me on timing w/o timing tab with Like Like.
    Use high breakin oil, like Driven, do just what Ricko said, it's exactly what I do. Also make or buy a oil pump priming tool.
  • R
    Ricko1966 replied to the thread Tv cable.
    This will destroy a 700r4. They have a TV cable it is not a kick down cable. It is a throttle valve cable. It controls the line pressure...
  • R
    Ricko1966 reacted to HotRodPC's post in the thread Tv cable with Like Like.
    If it's the TV cable causing it, then the cable is much to tight. I'd suspect the governor to be hung up or stuck before I'd expect the...
Show older items

Latest posts

Forum statistics

Threads
45,467
Posts
984,072
Members
38,521
Latest member
luis1jr
Top