Ricko1966's latest activity
-
RRicko1966 replied to the thread Instrument cluster questions on new build.^^^^^^ senders have to match the year of the gauge cluster. And type of gauges. Meaning if you've got an oil pressure light you need an...
-
RRicko1966 reacted to 75gmck25's post in the thread Instrument cluster questions on new build with
Like.
Oil pressure sensor should be the same for all the engines. Pressure is pressure. Temp sensor might be different, but I think they are... -
RRicko1966 reacted to Matt69olds's post in the thread Need help with my freshly rebuilt carb with Like.
It’s been 30 years since I messed with setting the mixture control solenoid on those carbs. If I remember correctly, there is a green...
-
RRicko1966 replied to the thread Need help with my freshly rebuilt carb.Check all ignition,timing and vacuum leaks first. The adjustments you can make to that carbureator are not likely to cure or cause a...
-
RRicko1966 replied to the thread Tq converter for 5.3 ls swap in a 700r4.If I were looking for a performance upgrade,on a factory converter,I'd use this chart. The factory converters have a 4 digit code 1st...
-
-
RRicko1966 reacted to Bextreme04's post in the thread Tq converter for 5.3 ls swap in a 700r4 with Like.
Nobody sells a new anything. If you buy one from summit it is going to be rebuilt. I'd take the one rebuilt by a reputable local company...
-
RRicko1966 reacted to Bextreme04's post in the thread Tq converter for 5.3 ls swap in a 700r4 with Like.
If you can get one, it will be faster and easier to just get a full 5.3/4l60 combo from the donor. A 4L60 is identical to your existing...
-
RRicko1966 reacted to 78C10BigTen's post in the thread What new tools have you got lately? with Like.
Ive had one of those since the square was my daily, used it about 3 times so far.... it has lived in my burban for many years.
-
RRicko if you help me figure out were the esc is and exactly what wires connectors go with it I’d be happy to send it to you. I should...
-
RRicko1966 reacted to DoubleDingo's post in the thread Double Dingo's 1965 3/4 Ton "Crusty Biscuit" with Like.
Couldn't have @1low4x4 being the only one working on a 65 chevy this weekend. It's time to tear off the mangled sheet metal. Got a...
-
RRicko1966 replied to the thread BBC 396 wil not idle with any carb.It's very possible,and common that the outer ring on the balancer has slipped or the wrong balancer was installed. Buy a piston stop,and...
-
RI saw on YouTube (like you suggested) bending in small increments moving the tube in 1/2 inch to 1 inch at a time it also helps to...
-
RRicko1966 replied to the thread Electric fuel pump.Running an electric pump,if you mount it in the rear and blow through the factory pump. You can maintain all your factory lines in the...
-
RRicko1966 replied to the thread Center support bearing HELP.Are you sure you aren't measuring the O.D. an inner race that is seized in place.
-
RRicko1966 replied to the thread Wiring Two subs together?.Been busy all day sorry. But I have nothing to add to what @CountKrunk said he explained wiring series vs. parallel better than I did...
