Ricko1966's latest activity
-
RRicko1966 replied to the thread What new tools have you got lately?.No fires,people say they catch fire,I've never seen it. I have bricked some KoBalt lithium ions by running them on nicad tools, also...
-
RI picked both of these up yesterday at the local Goodwill bins store. That is where they sell stuff by weight. Electrical stuff is sold...
-
RRicko1966 reacted to chris3353's post in the thread Changing gear ratios: opinions/suggestions wanted!! with
Like.
Sorry for the delay in responding,, did not get a notification.. I run a flat tappet Voodoo lunati 10120700 .437"/.454" 207/213 the... -
RRicko1966 replied to the thread My-6 new process 3-speed overdrive.The aluminum case 883s wear out the case where the countershaft rides,like the Muncie m22s,they can be bushed.The cast iron cases don't...
-
RRicko1966 reacted to malibuman402's post in the thread My-6 new process 3-speed overdrive with Like.
I have a np833 in my 84 c10 behind a 427 big block. i love the trans. i have 373 geared rear end and the truck runs great. you can get...
-
RRicko1966 replied to the thread Changing gear ratios: opinions/suggestions wanted!!.The flat tappet flat cam is not a myth,just not near as common as everyone believes. I worked at the same shop 1985-2001 we did...
-
RBad geometry results in poor line rise which will lead to 3-4 clutch and/or 2-4 band failure...Here's some instructions to help you with...
-
RI unfortunately don’t have a vacuum gauge right now but I will go get one. Not sure what power valve is in it, whatever comes stock in...
-
RRicko1966 replied to the thread Passing gear cable.I don't want to be the one to sound like chicken little,so I'll direct you here to do a little reading...
-
RRicko1966 replied to the thread Cylinders washed need help.Be sure you dont have any vacuum leaks.How much vacuum do you have at idle? What power valve is in the carb. If you don't have enough...
-
RRicko1966 replied to the thread Quadrajet Mystery and questions.I think that carb is 1976 chevy truck with a 350 engine.I also think @Doppleganger has a rebuilt qjet for your truck. His may be a dual...
-
RRicko1966 replied to the thread Passing gear cable.700r4 doesn't have a passing gear cable. That is a throttle valve cable,it controls transmission line pressure,if not installed and...
-
RRicko1966 reacted to NickTransmissions's post in the thread How many bolts hold the transmission on and where? with Like.
Then you don't have a flywheel, you have a flex plate...They are not the same nor can the terms be used interchangeably...Just FYI if...
-
RRicko1966 replied to the thread What new tools have you got lately?.A little tip for you about cordless tools. I put cords on them. 12v cigarette lighter cords from junk 12v car vacuums,spotlights, etc. I...
-
-
RRicko1966 replied to the thread What new tools have you got lately?.You got an electric ratchet for your wife? That's a helluva trade. Where can I get such a deal?
