Ricko1966's latest activity
-
RRicko1966 replied to the thread Alt Replacement Options? A bit confused..If you need to hack an SI all you do is wire terminal 2 to the B+ on the alternator touch term 1 with a test light with the engine...
-
RRicko1966 replied to the thread Power steering pump O-ring.I don't know if this will help. I think the correct number is 15 35055. But here's a link for how to measure O rings...
-
RRicko1966 replied to the thread My-6 new process 3-speed overdrive.Drive shaft will work,bellhousing probably will not. Make sure your bellhousing has a bolt pattern for your new transmission.
-
RRicko1966 reacted to ChuckN's post in the thread Need help identifying 12v wire for electric choke with
Like.
Shouldn’t there already be a wire that comes from the oil pressure sending unit? Unless it’s gone for some reason. I only know because... -
RYeah, it looks like the truck had a 6-port valve and they couldn't find one, so they used a pair of 3-port valves. I don't see why that...
-
RThe A6 is VERY reliable, other than the front seal is designed to leak. As long as the have oil in them, they are just about...
-
RRicko1966 reacted to Matt69olds's post in the thread 350turbo out 700r4 in expected cost? with Like.
What he said!! ^^^^ Too many people think as long as the tv cable is tight at WOT, then all is good. While that is partially true...
-
RRicko1966 reacted to Matt69olds's post in the thread Alt Replacement Options? A bit confused. with Like.
People run one wire alternators for one of 2 reasons: because they don’t understand how the charging system works, and are too stubborn...
-
RRicko1966 replied to the thread New Gas tank installation.The tank is dirt simple and fast,done this way. I don't even raise the truck. Get a cordless drill and appropriate bit and zap the...
-
RRicko1966 replied to the thread No chassis electrical.No it's not just a fuse,fuses don't just get old and quit. If the fuse popped it popped for a reason,you need to find,what overloaded...
-
RYou are definitely right about that. I can't remember seeing a vehicle with an aux cooler that wasn't plumbed in series from the factory.
-
RRicko1966 replied to the thread Alt Replacement Options? A bit confused..Running a 1 wire is not a good idea,unless you really have too. I can't see why anybody would have to but I haven't seen everyone's...
-
RRicko1966 reacted to legopnuematic's post in the thread Alt Replacement Options? A bit confused. with Like.
You should be able to swap the pulleys with the one from your old alternator.
-
RRicko1966 reacted to legopnuematic's post in the thread Alt Replacement Options? A bit confused. with Like.
What you have on there is a 12si unit. A little over 90 amp output, a nice improvement over the older 10si units. Standard (or maybe...
-
RRicko1966 reacted to legopnuematic's post in the thread Homemade and modified tool thread with Like.
Thank you. It is an older Clifford 4 barrel manifold, Aussie cast Dutra Dual split manifolds, Quick fuel 450 carburetor, JP performance...
