Ricko1966's latest activity
-
RRicko1966 replied to the thread Really tight front brakes!.Smart people.
-
RRicko1966 replied to the thread Really tight front brakes!.Yep,but we knew how to do our own brakes.
-
RRicko1966 replied to the thread What new tools have you got lately?.I was just messing with you back. Have a great day. Put it back like it was.
-
RRicko1966 replied to the thread Bed mounting hardware for short box step side..30 0144 is 1960-66
-
RRicko1966 replied to the thread Really tight front brakes!.Are you sure it's brakes and you didn't over tighten the front bearings.Are you sure you got the correct bearings? How did you tighten them?
-
RRicko1966 replied to the thread What new tools have you got lately?." then" not than. Spell check police are going to get you.Did you go to school?
-
RRicko1966 replied to the thread Th350 not shifting.Make sure the modulator itself is good and you aren't running a rubber line all the way from the engine to the modulator.
-
RRicko1966 replied to the thread What new tools have you got lately?.I used to cut the handle off the 1/4 socket nut drivers,and put the driver end in a corded drill circa 1980
-
RRicko1966 replied to the thread Edelbrock carbs on a 350 sm blk.I can't say you're a douche,but I can think it. What are you going to whine about today? Actors? Prices?Manufacturers? Websites...
-
RReally? There's always one. Will try to be more specific in the future. Yes, unless an OEM carb [by design] it is generic. Has to...
-
RRicko1966 replied to the thread 700r4 tv cable adjustment.I use gauges because I don't want to burn up transmissions. Make sure you get a warranty,let the shop adjust it and leave it alone. You...
-
RRicko1966 replied to the thread 700r4 tv cable adjustment.You need gauges to check adjustment. A lot of people use the set it too tight step on the pedal and it's adjusted method then tighten or...
-
REdlebrock carbs are decent however are generic. Get an AFR gauge/meter. It's much easier today to dial in carbs with one. Used to be had...
-
RMay or may not be jetted or adjusted for the application. Never assume any off the shelf carb will be correct. Even something as simple...
-
RRicko1966 replied to the thread What new tools have you got lately?.I use a garden sprayer,fill it with what ever fluid I need,give it a couple of pumps and fill diffs,gear boxes,etc. I spray all kinds...
