Ricko1966's latest activity
-
RYour thread has me noodling the nuances of proper lift installation. As a lift user, I always thought it was laughable how 8 bolts keeps...
-
RRicko1966 replied to the thread intake manifold.Nope it will all be fine
-
RRicko1966 replied to the thread intake manifold.Use what atomic says. If they say generic HEI,street fire would be a good choice for you. You aren't going to play with...
-
RRicko1966 replied to the thread intake manifold.What does atomic EFI recommend for a distributor? If they recommend a generic 49 states HEI than a street fire would probably be a...
-
RRicko1966 replied to the thread intake manifold.Engine idling apply vacuum to the egr valve you should here a big difference in idle when the vacuum pulls the egr valve open.if it...
-
RRicko1966 replied to the thread Bare Hands.About 2001 one of the guys in the shop got mechanix gloves. Pat my boss who I worked for from 1985 until about 2001, he looked at them...
-
RRicko1966 reacted to 77Dmax's post in the thread Big block running hot. Can’t figure out the issue with
Like.
I gotcha. They would have to put the ribbed side to a smooth pulley or vice versa, and that would be hard not to notice. Its a... -
RRicko1966 replied to the thread intake manifold.It won't matter one way or the other. And having an egr valve on your old manifold won't matter either,you can leave the valve in place...
-
RNaw, my ol' 90 burban got 22 on the hwy But that was a gutless tbi350.....stock 700r4..... stock Stock 3.08 axle with a stock...
-
RRicko1966 replied to the thread Big block running hot. Can’t figure out the issue.Oh I know the theory and how it is factory. Where I question it is if someone really strayed from factory routing,I can't convince...
-
RRicko1966 replied to the thread No driver's side rear turn signal or brake light, because no power at bulkhead.Look at the opposite side of the steering column from the electrical part of the ignition switch. You will see a long skinny electrical...
-
RBecause I stay in my lane. I don't post on anything I don't have direct experience with.
-
RRicko1966 replied to the thread Carb help? (With pictures).Okay cranks and cranks,no start unless starter fluid. First thing I'd check, is hold the choke plate open with your fingers( engine off)...
