peats's latest activity
-
PWhens the last time its gotten plugs wires and a coil? Failing to run on ether is the red flag, its not a carb issue i dont believe
-
PI'm thinking it should at least fire on ether regardless of carb issues. Have you checked for spark at the plugs?
-
PShift levers are manly. Push buttons are not.
-
PAt this stage of the game and not knowing the charge status,what works,etc. I'd unbolt the compressor. Bungee it to one side, pull my...
-
P@Truck82 Gonna sound like your dad here, but if you’re budget constrained and also wanting a 4x4 eventually, you’re doing it all wrong...
-
PYeah, I get that but time for something thicker and with a high zinc content for your cam and lifters. I’ll post a picture below of a...
-
PCut the oil filter open. If it’s clean of metallic debris, put a mechanical gauge on it to verify the oil pressure. If it’s still low...
-
PI run rotella t4 which is 15-40
-
P5-30 is too thin in my opinion for a run of the mill small block or big block. 10-30, 10-40, 15-40, 20-50 for these old mills...
-
PThe sensor on the thermostat housing 1 lead goes to the carb,where you are missing a plug,the other to ground. It provides a path to...
-
PKeep in mind larger tires,wider tires,heavier tires,more aggressive treads all affect mpg. Just don't want posts next, your mpg has...
-
Ppeats replied to the thread 700r4 TV cable cause acceleration/run away with 6.2?.I recently had to replace the throttle cable on my 6.2. It was sticking, not accelerating. Was able to get a GM part.
-
Ppeats replied to the thread Help with starting 79 k20 400SBC.I agree with Nedrow, the timing is way out cause it spits and sputters when it was flipped 180. That means there is spark and fuel present.
-
PPull #1 spark plug out, have someone turn the motor with you plugging the spark plug hole with your thump, on the outside, no finger in...
-
PEverybody,quit using brake cleaner,looking for intake leaks and as starting fluid,mounting tires etc. Burning brake cleaner creates...
