nvrenuf's latest activity
-
nvrenuf reacted to legopnuematic's post in the thread 2005 Ram 2500 Free Spin Install & Other Goodies with
Like.
Went to install the knuckle U joints, first one on the long axle shaft was fine, short (drivers side) shaft could get one ring in... -
nvrenuf reacted to legopnuematic's post in the thread 2005 Ram 2500 Free Spin Install & Other Goodies with Like.
Installed the new axle shaft seals, and clean of the inside of the housing. New ball joints. Canada Eh. Pressed in.
-
nvrenuf reacted to legopnuematic's post in the thread 2005 Ram 2500 Free Spin Install & Other Goodies with Like.
Finally was able to make it back up to the shop Friday after work. Between the snow and me being under the weather, waiting for parts...
-
nvrenuf reacted to legopnuematic's post in the thread 2005 Ram 2500 Free Spin Install & Other Goodies with Like.
Shane had decided to go with a new carrier, also new bearings and ring gear bolts. Will be transferring the spiders over. Some cast...
-
Here it the Cloyes timing cover, has roller button to control cam walk, and is easily adjustable. Will need to buy/make a timing...
-
My 86 is 4:10 rear, and i use low gear 1st alot. Usually around the yard or when towing. Not usually in town just driving around. In...
-
My buddy has a c20 service rig with ridiculously under geared rear. He cruises around and does burnouts in low. We've done 140 in that...
-
nvrenuf replied to the thread SM465 swap into 92 suburban..If you need to use granny gear while street driving the truck is grossly under geared.
-
To pick a good cam, you will first need to know what compression, heads and induction you will be using.
