NickTransmissions's latest activity
-
@NickTransmissions Howdy doo -
NickTransmissions replied to the thread Should I replace?.Take the piston out of the forward drum then thorougly clean and inspect it. Once you have done so, if there is no structural damage...
-
NickTransmissions replied to the thread 700R4 TCC Lockup Issues.Check for engine vacuum leaks, wiring concerns, etc. If no issues found, drop the pan and replace the transmission's internal wiring...
-
@NickTransmissions would possibly have an answer. If it all started with the brake switch- I would personally start by looking...
-
NickTransmissions replied to the thread transmission oil change.Live with it. That's mostly normal for those units.
-
NickTransmissions replied to the thread 4L80E Clearance Issues?.Both should fit without physical mods if a 700R4 or TH400 is now installed; I'd do a 4L80E as you end up ahead in terms of durability...
-
NickTransmissions replied to the thread TH 400 needed.Give me a breakdown of the parts and their respective prices that add up to roughly $1,000 and I'll let you know if it's in the ball...
-
NickTransmissions reacted to Craig Nedrow's post in the thread 700R4 started shifting really high RPM with
Like.
Is that a stock setup? I did not know that a 6.2d had that transmission. Reason, I have a TH400, but have a 700r4, would really help... -
NickTransmissions replied to the thread 700R4 started shifting really high RPM.Yep, some of those 6.2Ds had the 700R4s...The governors came with slightly heavier weights and springs to promote earlier shift points...
-
NickTransmissions replied to the thread TH400 Slipping When Warm - Chunks in Oil Pan.You're welcome. Looks like a combination of bronze thrust washer which sits on the front side of the rear planet and front/rear...
-
NickTransmissions reacted to Snoots's post in the thread TH400 Slipping When Warm - Chunks in Oil Pan with Like.
Ouch! Take Nicks' advice.
-
NickTransmissions replied to the thread TH400 Slipping When Warm - Chunks in Oil Pan.Yank it out and overhaul it! Debris like that in the pan = rebuild 100% of the time. check out my TH400 Information Thread for video...
-
https://ck5.com/forums/resources/how-to-wire-a-4l80e-transmission-for-manual-shifting-without-a-controller.85/...
-
Do you know 48 mod. It adds a vacuum modulator to control line pressure. Then you can shift it how ever you like. Switches,modified...
-
I do not. But I will as this sounds interesting. I was thinking of sending it to Nick for a full rebuild on mine. Max's fresh one may...
