mtbadbob's latest activity
-
Welcome from Central NC. There are plenty of info threads here as well as folks that will share experience & knowledge. I did a... -
Hi I am new here I actually have a 63 k10 with a 454 th400 on 86 k5 axles. I am here for the information Thank you
-
Yeah it's the only thing that makes sense. No one comes back and outbids their previous bid by $10k minutes after they just got outbid...
-
It definitely is not the most intuitive way to do that, IMO. Not sure why they would make it so you have to hover over it to have it...
-
There's a few. Here's one.
-
It looks in good shape but never can tell unless you pull it out. It does not look like it would be that hard to pull out. The bed...
-
Squarebody day! Did some troubleshooting and the front driveshaft turns if you turn front wheels when front end is off the ground...
-
mtbadbob reacted to Grit dog's post in the thread K5 Blazer values… possibly buying 86 k5 with
Like.
And based on growing up in the rust belt, these trucks rusted out faster than GMs and Fords. -
mtbadbob reacted to Grit dog's post in the thread K5 Blazer values… possibly buying 86 k5 with Like.
Not really sure what you are expecting to find for $5k. Never can tell without seeing in person, but aside from the hole cut in the...
-
mtbadbob reacted to Grit dog's post in the thread K5 Blazer values… possibly buying 86 k5 with Like.
There’s virtually no way that isn’t a complete pile of _____. No pics…lol Length of time for sale at that price for supposedly running...
-
Let's get back to your ignition switch,unbolt it from the side of the column without removing the column and without disassembling the...
-
If you can feel the detents in the switch and everything works as it should in the different detent positions,my money is on the...
-
There should be 2 screws holding the switch to the column, the holes in the switch are slotted allowing for about 1/4” or so of...
-
It's located near the bottom of the steering column. There are 2 screws holding it there. Loosen them (don't remove) and you can move...
-
I agree, switch may be out of adjustment. Another common problem is that the small rack on the end of the key cylinder is cracked, and...
