Matt69olds's latest activity
-
Matt69olds replied to the thread Avs2 problems.Take off the distributor cap and rotor, make sure the advance weights are free to move and return to their resting spot. If you adjust... -
Matt69olds replied to the thread Engine oil lines..I’ll leave the oil cooler block fitting discussion the the Chevy experts. Assuming the fitting can be removed from the block, anyplace...
-
Matt69olds replied to the thread Help! My coolant temp heats up fast in idle or slow-moving traffic (around 210F+) then decreases when I start driving (around 170F-190).First, 210 at idle isn’t terrible. If that’s as hot as it gets, I’d say you’re trying to fix a problem that really isn’t there. Make...
-
Matt69olds replied to the thread Electric fuel pump.Without a doubt. Holley has enough quality control issues on their own, you don’t need the added headaches of an external fuel pump.
-
Matt69olds replied to the thread Electric fuel pump.Are you SURE the float level is correct? It needs to be just below the sight glass window, if you shake the truck fuel should just...
-
Matt69olds replied to the thread Modern trailer controller wiring details.Make sure the controller signal wire is connected to the white wire of the brake switch.
-
Matt69olds replied to the thread 1987 R10: TH400 to 200-4R swap (mostly wiring??).The computer won’t care if the kickdown wire is disconnected. Somewhere there is a switch on the carb or throttle that sends power to...
-
Matt69olds replied to the thread 1987 R10: TH400 to 200-4R swap (mostly wiring??).Look up TCC wiring for a 700 swap. The TCC works and installs in basically the same way on a 200R4, the pressure switch is obviously in...
-
Matt69olds replied to the thread A Technical Comedy [Only After the Fact].Friend of mine locked his keys in the ignition in his Chevelle. He crawled under the car, pushed off the sheetmetal he had covering the...
-
Matt69olds replied to the thread Overheating 87 TBI.How hot does it actually get? Put a real gauge on it, and see what happens. You may be pleasantly surprised. When does it overheat...
-
Matt69olds replied to the thread Update on my Ignition Module failure!.Nope, you’re not nuts!!! I do the same thing. Unfortunately, my supply has almost vanished, and they aren’t in salvage yards anymore...
-
Matt69olds replied to the thread TH400 Yoke Bolt Came Out.Then you should be good.
-
Matt69olds replied to the thread TH400 Yoke Bolt Came Out.You need a washer also. It needs to fit well to the register inside the yoke. Technically, all the bolt does is keep the yoke in...
-
Matt69olds replied to the thread Column wiring harness need help.Here is a wiring diagram from a 87 G body, should be very close to what you need.
-
-
Matt69olds replied to the thread TH400 Yoke Bolt Came Out.I just tossed a handful of those bolts last week. Bummer. I would think as long as there is no other damage, replace the bolt, and...
