Matt69olds's latest activity

  • Matt69olds
    Matt69olds replied to the thread TH400 Yoke Bolt Came Out.
    I just tossed a handful of those bolts last week. Bummer. I would think as long as there is no other damage, replace the bolt, and...
  • Matt69olds
    Matt69olds replied to the thread Wiring Harness? Choosing one?.
    Agreed! Even if you’re starting from scratch, you could buy a couple good used harnesses and build one far cheaper.
  • Matt69olds
    If your referring to the relay I suggested, just about any GM car or truck 1990ish and newer will have one. Sometimes they are in the...
  • Matt69olds
    Since you have HEI, the BEST way to wire it is to find the original resistance wire and remove it. Then you can install a regular wire...
  • Matt69olds
    Matt69olds replied to the thread headlight/seat belt buzzer.
    I don’t remember the RPO code, but the blue chime module is the holy grail. That’s the one that doesn’t just sound an alarm, it has a...
  • Matt69olds
    Matt69olds replied to the thread 4l60 swap.
    What PCM does the truck have to control the LS? Before doing anything, make sure the PCM won’t control a transmission. If do, definitely...
  • Matt69olds
    Matt69olds replied to the thread Carb rebuilders?.
    John Herald Jr Ray Kleem there are several others on the Q-Jet Facebook page. I know Ray and Cliff worked together, I think Ray took...
  • Matt69olds
    Matt69olds replied to the thread Pumping Air to a Catalyst.
    The temp switch automatically locks the converter if it gets too hot. The theory is a locked converter will reduced heat. Of course...
  • Matt69olds
    Matt69olds replied to the thread headlight/seat belt buzzer.
    I think the difference is for seat belt warning. There is a trigger wire for the seat belt switch in the seat belt latch, and another...
  • Matt69olds
    Matt69olds replied to the thread headlight/seat belt buzzer.
    The easiest way to disable the key warning is to unscrew the door jamb switch, and disconnect and tape off whatever wire isn’t white. If...
  • Matt69olds
    For some reason, I can’t post pics!! What’s up with that?
  • Matt69olds
    Over the winter, my son and I have been fixing/updating some severely neglected things on his 92 Yukon. Things like replacing the...
  • Matt69olds
    Matt69olds replied to the thread headlight/seat belt buzzer.
    I’m curious, why do people despise them? I get it, the key in the ignition chime is annoying, but the headlight warning would be worth...
  • Matt69olds
    Matt69olds replied to the thread Pumping Air to a Catalyst.
    GM warmed the converters in the most reliable way at the time. Meaning they calibrated a cold start with increased idle speed, delayed...
  • Matt69olds
    Matt69olds replied to the thread TH350 Removal.
    If your going to add a plug, drill a small hole where your going to install the plug and let it drain that way. Much cleaner that way.

Latest posts

Forum statistics

Threads
45,478
Posts
984,242
Members
38,528
Latest member
PDlane200
Top