legopnuematic's latest activity
-
Soooo, while she looks a little rough, I just have one little bit of rust at the rear window, and body work is done. I will use 3M seam... -
Door Hinges 101 The body side of the hinges allow adjustments to be made: up, down and front to back. The door side if the hinge...
-
legopnuematic replied to the thread Help ID-ing and sourcing a part.From the 1978 service manual- No idea if this is correct for your application, but might give you some terms to search by.
-
-
legopnuematic reacted to legend57's post in the thread 5.7 back fires through carb but timing is good. with
Like.
A leak down test is a good idea. That will help you know how well the rings and valves are sealing. If you have a valve that is... -
legopnuematic replied to the thread Driver’s door decals.look at the lower section of your door sticker- He is looking for one for a 6600lb K20, instead of an 8600lb GVWR K20
-
-
Nice looking old 65. Kind of partial to them, as still have the old 65 my grandfather bought new here in the little town I live in...
-
The lower one should look like this other GVWR decal:
-
legopnuematic replied to the thread What year bed is this.I dont know the exact year, but I’d guess 1984-1985, as the 85 I parted had it, on the front of the bedsides there are some plastic...
-
-
Your picture just reminded me that there was also a change in the construction of the fuel doors. I don't know what year that happened...
-
It's a pretty safe bet that the beds have been replaced.
-
legopnuematic replied to the thread Finally got a running 65 C10.I would get a back tap/chaser from a local auto parts store over using a cut tap to chase the threads. Especially over a cheaper cut...
-
-
@bucket glad to see an update buddy, reminds me I need to do some as well, some things have happened and changed, and some bad things...
-
so some things have happened on this but not much. I did do some more body work, ds rear 1/4 front 1/4 and door, ready for primer then...
-
I like that green!
-
it's been a bit, tied up on the engine sap from this to the 86 gmc and carb issues, did some on dad's too but finally here's something...
